Instruction/ maintenance manual of the product 1031A Genelec
Go to page of 4
Genelec 1031A Monitoring System Operating Manual 1031A.
System The bi-amplified GENELEC 1031A is a two way active monitoring speaker designed to produce high SPL output, low coloration and broad bandwidth in a small cabinet size.
the three tone control switch groups ‘treble tilt’, ‘bass tilt’ and ‘bass roll-off ’ on the rear panel of the amplifier . The factory settings for these controls are ‘ All Off ’ to give a flat anechoic response. See T able 1 for sug- gested tone control settings.
1031A Operating Manual Genelec Document D1031AR001 Copyright Genelec Oy 6.2003. All data subject to change without prior notice www .genelec.com AMPLIFIER SECTION CROSSOVER SECTION SYSTEM SPECIFICA TI.
An important point after buying a device Genelec 1031A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genelec 1031A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genelec 1031A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genelec 1031A you will learn all the available features of the product, as well as information on its operation. The information that you get Genelec 1031A will certainly help you make a decision on the purchase.
If you already are a holder of Genelec 1031A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genelec 1031A.
However, one of the most important roles played by the user manual is to help in solving problems with Genelec 1031A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genelec 1031A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
