Instruction/ maintenance manual of the product USB100 Gefen
Go to page of 16
USB•100 USER MANUAL www.gefen.com.
Gefen Inc. wa equipment it m to be free fro m material and w If equi p because of su and Gefen In c within two (2).
ASKING FOR ASSIST ANCE T echnical Support : T elephone (818) 884-6294 (800) 545-6900 Fax (818) 884-3108 T echnical Support Hours: 8:00am to 5:00pm Monday thru Friday Write T o: Gefen, Inc. C/O Customer Service 6265 V ariel Avenue Woodland Hills, CA 91367-9897 © 2007 Gefen Inc.
T ABLE OF CONTENTS Introduction Operation Notes USB Series Installation USB•100 Panel Layout USB•100 Function Description Wiring Diagram Link Cable Diagram Check List T roubleshooting Hints W arra.
Thank you for purchasing the ex•tend•it USB•100 Series. The new USB•100 incorporates ExtremeUSB™ techology , which allows users the bene fi ts of USB technology beyond the desktop.
OPERA TION NOTES READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE USB•100 SYSTEM. * The USB•100 send and receive were designed to operate on USB enabled computers.
USB•100 SERIES INST ALLA TION 3 1. Place the USB•100R unit close to the USB devices at the re mote end. 2. Connect the USB devices to the USB•100R unit. 3. Connect the power adapter to a suitable DC source wall outlet. 4. Connect the power adapter to the USB•100R unit using the supplied cable.
USB•100 P ANELS LA YOUT USB•100S USB•100R USB•100R Power 1 2 3 4 5 6 Link USB In Link USB OUT 10 9 8 7 Power 12 11 4.
USB LED - Indicates if a USB connection is made properly USB In - USB cable (A-B) cable from computer to sender Link LED - Indicates if a link between the USB•100S send and the USB•100R Receive un.
WIRING DIAGRAM 6 Up to 330 feet using CA T5 cable USB•100R USB•100S.
LINK CABLE - WIRING DIAGRAM White/Blue Blue White/Green Brown White/Brown Green White/Orange Orange RJ-45 Jack 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 1 8 1 8 7.
1. On the USB•100S send unit, check that the power in di ca tor is GREEN. 2. On the USB•100S send unit, check that the link indicator is GREEN. 3. On the USB•100R receiver unit, check that the power in di ca tor is GREEN.
Power Indicator is not lit. -- Make certain the power supply unit is properly con nect ed to the USB•100R unit and to a proper local power sup ply outlet. Link Indicators are Green. -- Make certain that the host computer is operating and responding to commands.
W ARRANTY Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc.
.
*MA-usb-100* 6265 Variel Avenue Woodland Hills, CA 91367 1-800-545-6900 818-884-6294 fax: 818-884-3108 www.gefen.com gsinfo@gefen.com.
An important point after buying a device Gefen USB100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen USB100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen USB100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen USB100 you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen USB100 will certainly help you make a decision on the purchase.
If you already are a holder of Gefen USB100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen USB100.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen USB100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen USB100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
