Instruction/ maintenance manual of the product USB 2.0 LR Extender EXT-USB2.0-LR Gefen
Go to page of 15
www.gefen.com ® USB 2.0 LR Extender EXT-USB2.0-LR User’s Manual.
ASKING FOR ASSIST ANCE Rev B1 T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM (PST) Monday thru Friday . Write T o: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Panel Layout 5 Sender Panel Descriptions 6 Receiver Panel Layout 7 Receiver Panel Descriptions 8 Connecting And Operating The USB 2.
1 Congratulations on your purchase of the USB 2.0 LR Extender . Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
2 READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE USB 2.0 LR EXTENDER • Use industry standard CA T -5, CA T -5e or CA T -6. Gefen recommends using solid core cabling for maximum performance. • The USB 2.0 LR Extender is USB 2.0/1.1 compliant • The USB 2.
3 Features • Operate USB 2.0 peripherals up to 330ft (100m) from a computer • Supports low and high-speed USB • Uses industry-standard CA T5, CA T5e, or CA T6 cable • Supports all major operating systems -- Windows, MacOS and Linux.
4 Front Panel Back Panel 4 5 6 7 SENDER P ANEL LA YOUT 1 2 3.
5 1 Power LED Indicator This LED will become active once the host computer is connected to the sender unit. 2 Host Connection LED Indicator This LED will become active once a valid connection is made by the host source and the USB 2.0 LR Extender . 3 USB “B” Input Connector Connect the USB source to this input.
6 Front Panel Back Panel RECEIVER P ANEL LA YOUT 1 2 3 4 5 6 7 8.
7 1 Power LED Indicator This LED will become active once a valid connection is made between the included 5V DC power supply and an open wall power socket. 2 Host Connection LED Indicator This LED will become active once a valid connection is made by the host source and the USB 2.
8 How to Connect the USB 2.0 LR Extender 1. Connect the USB source to the USB 2.0 LR Extender sender unit using the supplied USB A to B cable. 2. Connect up to two USB peripherals to the USB 2.
9 TROUBLESHOOTING Using the LED Indicators to Troubleshoot Issues Power LED The power LED indicators should be active once the included 5V DC power supply has been properly connected between the receiving unit and an open wall power socket. A non-active LED can indicate a power problem.
12345678 Gefen has speci fi cally engineered their products to work with the TIA/EIA-568-B speci fi cation. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance.
11 WIRING DIAGRAM.
12 USB 2.0 Speed ....................................................................................... 480 Mbps Link Connectors ............................................................................. RJ-45 Shielded USB Connectors T ransmitter: .
An important point after buying a device Gefen USB 2.0 LR Extender EXT-USB2.0-LR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen USB 2.0 LR Extender EXT-USB2.0-LR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen USB 2.0 LR Extender EXT-USB2.0-LR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen USB 2.0 LR Extender EXT-USB2.0-LR you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen USB 2.0 LR Extender EXT-USB2.0-LR will certainly help you make a decision on the purchase.
If you already are a holder of Gefen USB 2.0 LR Extender EXT-USB2.0-LR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen USB 2.0 LR Extender EXT-USB2.0-LR.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen USB 2.0 LR Extender EXT-USB2.0-LR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen USB 2.0 LR Extender EXT-USB2.0-LR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
