Instruction/ maintenance manual of the product Monitor Switcher Gefen
Go to page of 10
1x4 DVI Monitor Switcher USER MANUAL www.gefen.com.
T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday through Friday . Write T o: Gefen Inc.
T ABLE OF CONTENTS Introduction Features Panel Desciptions Connecting and Operating the 1x4 DVI Monitor Switcher RMT4-IR Installation Speci fi cations W arranty 1 2 3 4 5 6 7.
Congratulations on your purchase of the ex•tend•it 1x4 DVI Monitor Switcher . Y our com- plete satisfaction is very important to us. Gefen’s line of DVI switches, extenders, and splitters are designed to make your A/V equipment use more comfortable, more productive and less expensive.
FEA TURES Features • Connects a DVI/HDMI source to multiple DVI or HDMI compatible monitors or projectors • Maintains highest single link video resolution (1920x1200x60hz) • Supports DDWG standa.
P ANEL DESCRIPTIONS 3 LED Indicators IR Eye DVI out 1 5v Power DVI out 2 Contact Closure DVI out 3 DVI In DVI out 4 IR Extender Port.
CONNECTING AND OPERA TING THE 1X4 DVI MONIT OR SWITCHER How to Connect the 1x4 DVI Monitor Switcher to your devices 1 Connect the supplied DVI cable from the DVI source into the 1x4 DVI Monitor Switcher Input. 2 Connect the cables from your displays (monitor or projector) into the DVI Outputs of the 1x4 DVI Monitor Switcher .
RMT4-IR INST ALLA TION 1. Remove battery cover from the back of the RMT4-IR remote. 2. V erify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery , hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down.
SPECIFICA TIONS 6 Video Ampli fi er Bandwidth ................................................................................. 1.65 GHz Input Video Signal ......................................................................................... 1.2 volts p-p Input DDC Signal .
Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc.
An important point after buying a device Gefen Monitor Switcher (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen Monitor Switcher yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen Monitor Switcher - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen Monitor Switcher you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen Monitor Switcher will certainly help you make a decision on the purchase.
If you already are a holder of Gefen Monitor Switcher, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen Monitor Switcher.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen Monitor Switcher. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen Monitor Switcher along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
