Instruction/ maintenance manual of the product HDTV Switcher Gefen
Go to page of 12
HDTV Switcher USER MANUAL www.gefen.com.
T echnical Support : T elephone (818) 884-6294 (800) 545-6900 Fax (818) 884-3108 T echnical Support Hours: 9:00 AM to 5:00 PM Monday thru Friday . Write T o: Gefen Inc. C/O Customer Service 6265 V ariel Ave. Woodland Hills, CA 91367-9897 Notice Gefen Inc.
T ABLE OF CONTENTS Introduction Features Panel Desciptions Connecting and Operating the HDTV Switcher RMT2-IR Installation IR Code Con fl icts IR-Extender Installation Speci fi cations W arranty 1 2.
Congratulations on your purchase of the ex•tend•it HDTV Switcher . Y our complete satisfaction is very important to us. Gefen’s line of HDTV switches, extenders, and splitters are designed to make your A/V equipment use more comfortable, more productive and less expensive.
FEA TURES Features • Switches easily between any two HDTV sources • Maintains 480i, 480p, 720p, 720i, 1080i, and 1080p (1920x1200) resolutions • Extends any DVI compliant device by regenerating .
P ANEL DESCRIPTIONS Input 1 and 2 Equalization Adjustments Connects to IR extender IR eye Indicates if port 1 or port 2 is selected Selects port 1 or port 2 3 IR eye.
Connecting and Operating the HDTV Switcher How to Connect the HDTV Switcher to your devices 1 Connect the supplied DVI cables from the HDTV DVI sources into the DVI Switcher Input. 2 Connect the cable from your display (monitor or projector) into the DVI Out of the HDTV Switcher .
RMT2-IR Installation 1. Remove battery cover from the back of the RMT2-IR remote. 2. V erify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery , hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down.
IR Code Con fl icts How to Resolve IR Code Con fl icts There are matching pairs of dip switches underneath the Switcher unit and under the remote battery cover . Switch 1 & 2 on the Remote and Switch 3 & 4 underneath the unit are the matching switches.
IR Extender Installation How to Connect the IR Extender 1 Plug the IR extender into the Remote port on the front of the Switcher Unit 2 Flip the Dip Switch 1 underneath the unit to the ON position 7.
SPECIFICA TIONS 8 Video Ampli fi er Bandwidth ............................................................................... 1.65 Gbps Input Video Signal ......................................................................................... 1.2 volts p-p Input DDC Signal .
Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc.
An important point after buying a device Gefen HDTV Switcher (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen HDTV Switcher yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen HDTV Switcher - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen HDTV Switcher you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen HDTV Switcher will certainly help you make a decision on the purchase.
If you already are a holder of Gefen HDTV Switcher, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen HDTV Switcher.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen HDTV Switcher. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen HDTV Switcher along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
