Instruction/ maintenance manual of the product EXT-HDMI1.3IR-FO-141 Gefen
Go to page of 11
www.gefen.com 1.3 Over Fiber with IR EXT-HDMI1.3IR-FO-141 User Manual.
T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday . Write T o: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .gefentv .com support@gefen.
T ABLE OF CONTENTS 1 Introduction / Operation Notes 2 Features / Package Includes 3 Sender Panel Descriptions 4 Receiver Panel Descriptions 5 Connecting and Operating the HDMI 1.
INTRODUCTION 1 Congratulations on your purchase of the HDMI 1.3 Over Fiber with IR. Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
OPERA TION NOTES READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE HDMI 1.3 OVER FIBER WITH IR • Use one SC terminated multi-mode fi ber optic cable and one industry standard CA T -5, CA T -5e or CA T -6 cables to operate the HDMI 1.3 Over Fiber with IR.
FEA TURES 2 Features • Immune to electro-magnetic interference (EMI) • T ransmits HDMI 1.3 audio/video at full bandwidth • 1000-foot (330m) extension distance, maximum • Delivers highest quali.
SENDER P ANEL DESCRIPTIONS 3 Front Panel Back Panel IR Blaster Output Port Power LED Indicator RS-232 Input HDMI Input 5V DC Power Input RJ-45 Port SC Fiber Optic Port.
RJ-45 Port SC Fiber Optic Port 4 RECEIVER P ANEL DESCRIPTIONS Front Panel Back Panel RS-232 Output HDMI Output Power LED Indicator IR Receiver 5V DC Power Input.
5 CONNECTING AND OPERA TING THE HDMI 1.3 Over Fiber with IR 1. Connect the HDMI source to the HDMI 1.3 Over Fiber with IR sending unit’s HDMI input port using the supplied HDMI cable. 2. Connect the RS-232 source to the HDMI 1.3 Over Fiber with IR sending unit’s RS-232 input port using the supplied DB-9 serial cable.
NETWORK CABLE WIRING DIAGRAM 7 12345678 Gefen has speci fi cally engineered their products to work with the TIA/EIA-568-B speci fi cation. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance.
SPECIFICA TIONS 8 Video Ampli fi er Bandwidth ........................................................................ 340 MHz HDMI Input/Output Connector ........................................................... type A, 19 pin Link Connector .....
An important point after buying a device Gefen EXT-HDMI1.3IR-FO-141 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen EXT-HDMI1.3IR-FO-141 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen EXT-HDMI1.3IR-FO-141 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen EXT-HDMI1.3IR-FO-141 you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen EXT-HDMI1.3IR-FO-141 will certainly help you make a decision on the purchase.
If you already are a holder of Gefen EXT-HDMI1.3IR-FO-141, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen EXT-HDMI1.3IR-FO-141.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen EXT-HDMI1.3IR-FO-141. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen EXT-HDMI1.3IR-FO-141 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
