Instruction/ maintenance manual of the product EXT-HDMI1.3-1FO Gefen
Go to page of 17
® E x te n de r f o r H D MI ® 1. 3 ove r O n e Fi b e r w ith I R EX T - H D MI1. 3- 1 FO Us e r Manual www. ge f e n. co m.
ASKING FOR ASSIST ANCE T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday Paci fi c T ime Write T o: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Layout 5 Sender Unit Descriptions 6 Receiver Unit Layout 7 Receiver Unit Descriptions 8 Connecting and Operating the Extender 9 DIP S.
1 INTRODUCTION Congratulations on your purchase of the Extender for HDMI 1.3 Over One Fiber with IR. Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
2 OPERA TION NOTES READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE EXTENDER FOR HDMI 1.3 OVER ONE FIBER WITH IR • IR data repeater functionality is single-directional. IR data can only be transmitted from the Receiving unit back to the Sending unit.
3 FEA TURES HDMI 1.3 Features • 225 MHz (up to 12 bit YUV 444 @ 1080p) • Deep Color • Dolby T rueHD and DTS-HD Master Audio • Lip-Sync • CEC Protocol Pass-Through Features • Supports video.
4 SENDER UNIT LA YOUT Front Back 3 45 67 12.
5 SENDER UNIT DESCRIPTIONS 1 Power Indicator This two-color LED will turn bright red once the included 5V DC locking power supply has been properly connected to the unit and the locking power supply has been connected to an available wall outlet. This LED will turn bright green once the Sender unit and Receiver unit are communicating correctly .
6 Front Back RECEIVER UNIT LA YOUT 34 5 12 8 67.
7 RECEIVER UNIT DESCRIPTIONS 1 RS-232 Output Port Connect a controlling device to this port. 2 Locking HDMI Output Port Connect a HDTV display to this HDMI port 3 IR Window Receives signals from the Hi-Def source IR remote control unit. The IR signals are sent back to the source device, when using an IR Blaster .
8 EXT -HDMI1.3-1FO SC-SC FIBER OPTIC CABLE (Up to 1,000 ft) Sender HDMI Source Receiver HD Display HDMI CABLE How to Connect the Extender for HDMI 1.3 over One Fiber with IR 1. Connect a Hi-Def source to the Sender Unit using the included Locking HDMI cable.
DIP SWITCH CONFIGURA TION 9 DIP Switches On the bottom of the Sender Unit and Receiver Unit are a bank of four (4) DIP switches. These DIP switches provide control over EDID, Deep Color , and unit Calibration. Remove the strip of tape to expose the DIP switches.
10 DIP SWITCH CONFIGURA TION DIP 1 - EDID Mode • OFF - Local EDID When Local EDID mode is used, the EDID will be assembled by copying all video and audio features of the connected device.
11 DIP SWITCH CONFIGURA TION Calibrating the Sender Unit and Receiver Unit IMPORT ANT : Before beginning the calibration process, make sure that the Sender Unit and Receiver are not powered. 1. Make sure DIP switch 3 on both the Sender Unit and the Receiver Unit are in the OFF position (see page 9).
12 SPECIFICA TIONS Video Ampli fi er Bandwidth ........................................................................ 225 MHz Maximum Resolutions Supported: ..................................1080p60, 1920x1200, 2K Input Video Signal ...............
W ARRANTY 13 Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is noti fi ed within two (2) years .
20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www .gefen.com support@gefen.com Rev A5 This product uses UL listed power supplies.
An important point after buying a device Gefen EXT-HDMI1.3-1FO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen EXT-HDMI1.3-1FO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen EXT-HDMI1.3-1FO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen EXT-HDMI1.3-1FO you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen EXT-HDMI1.3-1FO will certainly help you make a decision on the purchase.
If you already are a holder of Gefen EXT-HDMI1.3-1FO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen EXT-HDMI1.3-1FO.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen EXT-HDMI1.3-1FO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen EXT-HDMI1.3-1FO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
