Instruction/ maintenance manual of the product EXT-HDMI1.3-1CAT6 Gefen
Go to page of 16
www .gefen.com www gefen com Extender for 1.3 over one CA T -6 EXT -HDMI1.3-1CA T6 User Manual.
T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday (PST). Write T o: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .gefen.com support@gefen.
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Panel Layout 5 Sender Panel Descriptions 6 Receiver Panel Layout 7 Receiver Panel Descriptions 8 Connecting And Operating The Extender 9 D.
1 Congratulations on your purchase of the Extender for HDMI 1.3 over one CA T6. Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
2 OPERA TION NOTES READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE EXTENDER FOR HDMI 1.3 OVER ONE CA T6 • The Extender for HDMI 1.3 over one CA T6 was designed for use with high quality CA T -6a (augmented) cabling. This unit will either not perform to specif cation or refuse to operate completely if cabling other than CA T -6a is used.
3 Features • Flexible extension of high-bandwidth HDMI 1.3 thanks to inexpensive and widely-available CA T6 cable • Audio and video are transmitted digitally over the CA T6 cable for zero signal loss • Single Link Range (maximum resolution): 1080p/60, 12-bit color depth • Compliant with HDMI 1.
4 Front Panel Back Panel 1 2 3 4 SENDER P ANEL LA YOUT.
5 1 5V DC Power Receptacle Connect the included 5V DC power supply between this input and an open wall power socket. 2 Power LED Indicator This LED will become active once the included 5V DC power supply is properly connected between the unit and an open wall power socket.
6 Front Panel Back Panel 1 2 3 5 4 RECEIVER P ANEL LA YOUT.
7 1 Equalization Adjustment This trimpot is used to equalize the signal to compensate for the extension distance and the quality/skew variances that are found in different CA T -6a cabling brands. 2 HDMI Input With Mono•LOK Secure Connector This input will accept a single HDMI source for extension.
8 How to Connect the Extender for HDMI 1.3 over one CA T6 1. Connect a HDMI cable (one is supplied) between the HDMI output on a HDMI source device and the HDMI input on the Extender for HDMI 1.3 over one CA T6 sending unit . 2. Connect a single CA T -6a cable between the sending and receiving units.
9 DIP SWITCH CONFIGURA TION DIP SWITCH CONFIGURA TION – DEEP COLOR By default, Deep Color support is disabled (DIP #2 in the OFF position). If Deep Color support is needed, you can change the position of one of the DIP switches on the bottom of the receiver: 1.
10 DIP SWITCH CONFIGURA TION DIP SWITCH CONFIGURA TION – EDID Under normal circumstances, a source device (digital and analog) will require information about a connected device/display to assess what resolutions and features are available.
12345678 Gefen has specif cally engineered their products to work with the TIA/EIA-568-B specif cation. Please adhere to the table below when f eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance.
12 Video Ampli f er Bandwidth ....................................................................... 225 MHz Single Link Max. Resolution ................................................ 1080p/60, 12 bit color Input DDC Signal ........................
13 Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notif ed within two (2) years from the date.
An important point after buying a device Gefen EXT-HDMI1.3-1CAT6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen EXT-HDMI1.3-1CAT6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen EXT-HDMI1.3-1CAT6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen EXT-HDMI1.3-1CAT6 you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen EXT-HDMI1.3-1CAT6 will certainly help you make a decision on the purchase.
If you already are a holder of Gefen EXT-HDMI1.3-1CAT6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen EXT-HDMI1.3-1CAT6.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen EXT-HDMI1.3-1CAT6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen EXT-HDMI1.3-1CAT6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
