Instruction/ maintenance manual of the product EXT-HDMI-CAT5-4X Gefen
Go to page of 15
www .gefen.com f CA T5 4X Extender EXT -HDMI-CA T5-4X User Manual.
T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday . Write T o: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .gefen.com support@gefen.
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Panel Descriptions 5 Receiver Panel Descriptions 6 Connecting And Operating The Hdmi Cat5 4x Extender 7 Manual Equalization Procedure 8 Di.
1 Congratulations on your purchase of the HDMI CA T5 4X Extender . Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE HDMI CA T5 4X EXTENDER The • HDMI CA T5 4X Extender and HDMI CA T5 MSR units are housed in a metal box for better RF shielding. The maximum cable extension is 300 feet (91 meters) for video resolutions • of 1080i and below .
3 Features Easily distribute four HDMI sources to four remote HDMI displays • Extends video signals up to 300 feet over CA T -5, CA T -5e or CA T -6 network • cable Maintains 1920 x 1200, 1080p, a.
4 Front Panel Back Panel Video 4 RJ45 Outputs Video 4 HDMI Input Power LED Video 3 HDMI Input Video 2 HDMI Input Video 1 HDMI Input 24V DC Power Input Video 3 RJ45 Outputs Video 2 RJ45 Outputs Video 1.
5 Front Panel Back Panel HDMI Output VIDEO RJ-45 Port DDC RJ-45 Port 5V DC Power input Power LED Indicator EQ trim pot RECEIVER P ANEL DESCRIPTIONS.
6 How to Connect the HDMI CA T5 4X Extender Connect your sources (up to four) to the HDMI CA T5 4X Extender unit’s 1. HDMI inputs using the supplied HDMI cables. Connect your displays (up to four) to the HDMI CA T5 MSR receiver unit’s 2. HDMI outputs using user supplied HDMI cables.
7 MANUAL EQUALIZA TION PROCEDURE The HDMI CA T5 4X Extender and HDMI CA T5 MSR receiver units both have sets of dip switches located on the underside of their casings. There is a piece of silver metallic tape that must be removed to expose these dip switches.
8 Remove T ape Equalization T rim Pot Auto EQ Dip Switches 14 3 2 14 3 2 Boost Dip Switches Remove T ape FRONT HDMI CA T5 4X Extender HDMI CA T5 MSR DIP SWITCH LOCA TION DIAGRAM.
12345678 Gefen has speci fi cally engineered their products to work with the TIA/EIA-568-B speci fi cation. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance.
10 Rear of unit Front of unit Rack mount ears are provided for installation of this unit into a 1U rack mount space. Locate the side screws on the unit. 1. Remove the front 2 screws that are located closest to the front of the unit. 2. Using the removed screws, screw the rack mounting bracket into the unit.
11 1 2 3 R emove the rubber feet covering the screws off the bottom of the unit. R emove the screws. Line up the mounting plates and screw it on to the unit.
12 Video Ampli fi er Bandwidth ..............................................................4 x 165 MHz Input Video Signal .......................................................................... 1.2 V olts p-p Input DDC Signal ...................
An important point after buying a device Gefen EXT-HDMI-CAT5-4X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen EXT-HDMI-CAT5-4X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen EXT-HDMI-CAT5-4X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen EXT-HDMI-CAT5-4X you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen EXT-HDMI-CAT5-4X will certainly help you make a decision on the purchase.
If you already are a holder of Gefen EXT-HDMI-CAT5-4X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen EXT-HDMI-CAT5-4X.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen EXT-HDMI-CAT5-4X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen EXT-HDMI-CAT5-4X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
