Instruction/ maintenance manual of the product EXT-DVI-441DL Gefen
Go to page of 31
® 4x1 DVI DL Switcher EXT-DVI-441DL User Manual www.gefen.com.
ASKING FOR ASSIST ANCE T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday PST Write T o: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting and Operating The 4x1 DVI DL Switcher 7 RMT -4IR Remote Control Description 8 4x1 DVI DL Switcher .
1 INTRODUCTION Congratulations on your purchase of the 4x1 DVI DL Switcher . Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
OPERA TION NOTES 2 READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE GEFEN 4X1 DVI DL SWITCHER • The 4x1 DVI DL Switcher will take any of up to four (4) DVI dual-link or single-link resolution inputs and switch them, one at a time, to a DVI output device such as a display/monitor or projector .
3 FEA TURES Features • Switches easily between any four DVI-SL or DVI DL sources • Maintains highest resolution dual link DVI • Supports resolutions up through 3840x2400 • EDID Storage and pro.
4 P ANEL LA YOUT Back Panel Front Panel 6 8 9 7 5 4 2 1 3.
5 P ANEL DESCRIPTIONS 1 External IR Port For connection of external IR extension device such as the Gefen IR Extender (part # EXT -RMT -EXTIR). 2 IR Receiver Receives IR signal from the handheld Infrared remote control unit included with the product.
6 CONNECTING AND OPERA TING THE 4X1 DVI DL SWITCHER How to Connect the 4x1 DVI DL Switcher to your devices: 1. Connect user supplied DVI cables from the DVI sources into the 4x1 DVI Switcher ’s Inputs. 2. Connect the cable from your display (monitor or projector) into the DVI Out of the 4x1 DVI DL Switcher .
7 4X1 DVI DL SWITCHER REMOTE DESCRIPTION Input Selection Buttons The RMT -4IR remote control will allow the user to select which of 4 DVI sources will be displayed. Please use the information below when selecting the desired source for output to a display or other DVI video receiving device.
8 4X1 DVI DL SWITCHER REMOTE INST ALLA TION T o use the RMT -4IR remote, remove the battery cover on the back of the remote to reveal the battery compartment. Insert the included battery into the open battery slot. The positive (+) side should be facing up.
9 4X1 REMOTE CONTROL AND SWITCHER CONFIGURA TION How to Resolve IR Code Con fl icts In the event that IR commands from other remote controls con fl ict with the supplied RMT -4IR remote control, changing the remote control channel will alleviate this issue.
10 EDID MODES What is EDID and what is it used for? Under normal circumstances, an audio/video source device (digital or analog) will require information about a connected device/display to assess what resolutions and features (capabilities) are possible.
11 EDID MODES 1 2 3 4 EDID Modes The diagram below illustrates the 4-position DIP switch bank (containing 4 small white toggle switches as shown). The functions of the switches are as follows: DIP SWITCH Function 1 IR Channel 2 IR Channel 3 EDID Mode 4 EDID Lock Mode Use DIP switch 3 to set the desired EDID mode.
12 DL (Dual Link) Only Modes The 8-position DIP switch bank located on the underside of the 4x1 DVI DL Switcher can be used to set each individual input to work in a Dual Link Only mode. These modes should only be enabled if issues occur when using Dual Link sources and displays in the default mode.
13 RS-232 SERIAL CONTROL INTERF ACE What features are available via the RS-232 serial communications port? The 4x1 DVI DL Switcher can accept commands through the RS-232 serial communications port located on the rear panel. The current RS-232 control features are the ability to switch/route inputs to outputs without the RMT -4IR remote control.
14 RS-232 SERIAL CONTROL COMMANDS RS-232 Features RS-232 remote functions are used to control of this product’s features. Features include input to output routing, EDID storage, EDID management, etc.
15 RS-232 SERIAL CONTROL COMMANDS #EDIDDSTOLO Function The #EDIDDSTOLO function reads the downstream EDID and stores into all lo- cal inputs. Syntax: #EDIDDSTOLO Parameters: None #EDIDDSTOBA Function The #EDIDDSTOBA function reads the downstream EDID and stores it to a speci fi ed EDID bank.
16 RS-232 SERIAL CONTROL COMMANDS #DDCTODS Function The #DDCTODS function routes the input DDC to the downstream EDID (pass- through mode). Syntax: #DDCTODS Parameters: None #DDCTOLO Function The #DDCTOLO function routes the input DDC to the local EDID.
17 RS-232 SERIAL CONTROL COMMANDS #LOEDIDTOBA Function The #LOEDIDTOBA function loads the speci fi ed EDID fi le and stores it in a speci fi ed EDID bank.
18 RS-232 SERIAL CONTROL COMMANDS #LOEDIDTOLO Function The #LOEDIDTOLO function loads the speci fi ed EDID fi le to a speci fi ed local input. Syntax: #LOEDIDTOLO param1 param2 Parameters: param1 E.
19 RS-232 SERIAL CONTROL COMMANDS #PRDSEDID Function The #PRDSEDID function reads the downstream EDID and sends it to the serial port. Syntax: #PRDSEDID param1 Parameters: param1 File type [0 - 1] V alue Meaning 0 .BIN fi le 1 .TXT fi le #PRLOEDID Function The #PRLOEDID function reads the local EDID and spools it to the serial port.
20 RS-232 SERIAL CONTROL COMMANDS Commands Simpli fi ed syntax was used for command implementation for faster operation with the device: # character – isn’t needed, the command name is reduced to 1 letter .
RS-232 SERIAL CONTROL COMMANDS 2. USING SHORT -CUT CHARACTERS TO CHANGE SETTINGS 2.1 HYPERTERMINAL tm SETTINGS in Microsoft Windows tm First, please setup correct communications by performing these co.
22 RACK MOUNT INST ALLA TION Rear of unit Front of unit Rack mount ears are provided for installation of this unit into a 1U rack mount space. 1. Locate the side screws on the unit. 2. Remove the front 2 screws that are located closest to the front of the unit.
SPECIFICA TIONS 23 Video Ampli fi er Bandwidth:..................................................................2 x 165 MHz Input Video Signal:...............................................................................1.2 V olts p-p Input DDC Signal:.
24 W ARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is noti fi ed within two (2) years .
25 NOTES.
26 NOTES.
NOTES.
20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www .gefen.com support@gefen.com Rev A10 Pb This product uses UL listed power supplies.
An important point after buying a device Gefen EXT-DVI-441DL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen EXT-DVI-441DL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen EXT-DVI-441DL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen EXT-DVI-441DL you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen EXT-DVI-441DL will certainly help you make a decision on the purchase.
If you already are a holder of Gefen EXT-DVI-441DL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen EXT-DVI-441DL.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen EXT-DVI-441DL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen EXT-DVI-441DL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
