Instruction/ maintenance manual of the product EXT-DVI-1CAT5-SR Gefen
Go to page of 22
Audio Embedder 3GSDI Release A1 User Manual EXT-DVI-1CAT5-SR DVI ELR Lite Extender over one CAT-5.
DVI ELR Lite Extender over one CAT-5 Important Safety Instructions ii GENERAL SAFETY INFORMA TION 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this product near water . 6. Clean only with a dry cloth.
DVI ELR Lite Extender over one CAT-5 Warranty Information Gefen warrants the equipment it manufactures to be free from defects in material and workmanship.
iv DVI ELR Lite Extender over one CAT-5 Gefen, LLC c/o Customer Service 20600 Nordhoff St. Chatsworth, CA 9131 1 T elephone: (818) 772-9100 (800) 545-6900 Fax: (818) 772-9120 Email: support@gefen.
v v 3GSDI Audio Embedder Operating Notes DVI ELR Lite Extender over one CAT-5 • CA T -5 cables should not exceed 200 feet (60 meters). CA T -6 cables should not exceed 230 feet (70 meters). • Shielded T wisted-Pair (STP) CA T -5 or CA T -6 cabling is recommended.
vi Features • Extends DVI up to 230 feet (70 meters) over one CA T -6A cable • Extends DVI up to 200 feet (60 meters) over one CA T -5e cable • Supports resolutions up to 1080p Full HD and 1920 .
.
3GSDI Audio Embedder DVI ELR Lite Extender over one CAT-5 Table of Contents viii 01 Getting Started Sender Unit Layout ................................................................................................ 2 Front Panel .....................
.
.
DVI ELR Lite Extender over One CAT-5 01 Getting Started Sender Unit Layout ................................................................................................ 2 Front Panel .................................................................
page | 2 Front Panel ID Name Description 1 5V DC Connect the included 5V DC power supply to this power receptacle. 2 Link This LED indicator will glow bright green when power is applied and a CA T -5 cable is connected between the Sender and Receiver unit.
Back Panel ID Name Description 1 Link Connect a CA T -5 cable from this jack to the Link jack on the Receiver unit. 1 Getting Started page | 3 Sender Unit Layout.
page | 4 Bottom Panel ID Name Description 1 DIP switches Used for troubleshooting purposes only . See DIP Switch Conguration for more information. 1 Getting Started Sender Unit Layout.
page | 5 Getting Started Receiver Unit Layout Front Panel ID Name Description 1 5V DC Connect the included 5V DC power supply to this power receptacle. 2 Link This LED indicator will glow bright green when power is applied and a CA T -5 cable is connected between the Sender and Receiver unit.
page | 6 Getting Started Receiver Unit Layout Back Panel ID Name Description 1 Link Connect a CA T -5 (or better) cable from this jack to the Link jack on the Sender unit.
Page Title page | 7 Getting Started Installation Connecting the DVI ELR Lite Extender over one CAT-5 1. Use the included DVI cable to connect the DVI source to the DVI In port on the Sender unit. 2. Connect the Receiver unit to the display using another DVI cable.
.
DVI ELR Lite Extender over One CAT-5 02 Appendix DIP Switch Conguration .................................................................................... 10 Specications ........................................................................
page | 10 On the bottom panel of the DVI ELR Lite Extender over one CA T -5 are a bank of 4 DIP switches. Remove the piece of colored tape to reveal the DIP switch bank. These DIP switches provide control over EDID management, Hot-Plug Detect, and HDCP .
page | 1 1 Appendix Specications Supported Formats Resolutions (max.) • 1920 x 1200 (WUXGA) • 1080p Full HD Electrical Maximum Pixel Clock • 165 MHz Power Indicator • 1 x LED, blue Link Ind.
This product uses UL or CE listed power supplies. Stretch it, Switch it, Split it, Control it. Gefen’s got it. ® 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.
An important point after buying a device Gefen EXT-DVI-1CAT5-SR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen EXT-DVI-1CAT5-SR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen EXT-DVI-1CAT5-SR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen EXT-DVI-1CAT5-SR you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen EXT-DVI-1CAT5-SR will certainly help you make a decision on the purchase.
If you already are a holder of Gefen EXT-DVI-1CAT5-SR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen EXT-DVI-1CAT5-SR.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen EXT-DVI-1CAT5-SR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen EXT-DVI-1CAT5-SR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
