Instruction/ maintenance manual of the product Digital Audio Switcher Gefen
Go to page of 12
Digital Audio Switcher USER MANUAL www.gefen.com.
T echnical Support : T elephone (818) 884-6294 (800) 545-6900 Fax (818) 884-3108 T echnical Support Hours: 9:00 AM to 5:00 PM Monday thru Friday . Write T o: Gefen Inc. C/O Customer Service 6265 V ariel Ave. Woodland Hills, CA 91367-9897 Notice Gefen Inc.
T ABLE OF CONTENTS Introduction Features Panel Descriptions Connecting and Operating the 2x1 Digital Audio Switcher RMT2-IR Installation IR Extender Installation Speci fi cations W arranty 1 2 3 4 5 .
Congratulations on your purchase of the ex•tend•it 2x1 Digital Audio Switcher . Y our complete satisfaction is very important to us. Gefen’s line of HDTV switches, extenders, and splitters are designed to make your A/V equipment use more comfortable, more productive and less expensive.
FEA TURES Features • Switches easily between any two Digital Audio sources • Optional RMT -2 remote control • T OSLINK cables are used to connect the T OSLINK inputs and 2x1 T OSLINK Digital Aud.
P ANEL DESCRIPTIONS Connects to 5VDC power supply Connects to IR extender IR eye Indicates if port 1 or port 2 is selected Selects port 1 or port 2 3 SPDIF Out Optical Out SPDIF 1 SPDIF 2 OPT 2 OPT 1.
Connecting and Operating the 2x1 Digital Audio Switcher How to Connect the 2x1 Digital Audio Switcher to your devices 1 Connect the digital audio cables from your devices into the 2x1 Digital Audio Switcher inputs. 2 Connect your digital audio receiver to the 2x1 Digital Audio Switcher output.
RMT2-IR Installation 1. Remove battery cover from the back of the RMT2-IR remote. 2. V erify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery , hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down.
IR Extender Instructions How to Connect the IR Extender to the 2x1 Digital Audio Switcher 1 Open the unit so the circuit board below is accessible. 2 Add a jumper to close the contact between the pins.
SPECIFICA TIONS 7 Input/Output Connector T ype .............................................................S/PDIF and T OSlink S/PDIF (Digital coax) performance .........................................................................96 kHz Power Consumption .
Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc.
*ma-dviaud-241* 6265 Variel Avenue Woodland Hills, CA 91367 1-800-545-6900 818-884-6294 fax: 818-884-3108 www.gefen.com gsinfo@gefen.com.
An important point after buying a device Gefen Digital Audio Switcher (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen Digital Audio Switcher yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen Digital Audio Switcher - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen Digital Audio Switcher you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen Digital Audio Switcher will certainly help you make a decision on the purchase.
If you already are a holder of Gefen Digital Audio Switcher, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen Digital Audio Switcher.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen Digital Audio Switcher. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen Digital Audio Switcher along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
