Instruction/ maintenance manual of the product 4x2 HD-SDI Gefen
Go to page of 16
4x2 HD-SDI Switcher USER MANUAL www.gefen.com.
.
T echnical Support : T elephone (818) 884-6294 (800) 545-6900 Fax (818) 884-3108 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday . Write T o: Gefen Inc. C/O Customer Service 6265 V ariel Ave. Woodland Hills, CA 91367-9897 Notice Gefen Inc.
T ABLE OF CONTENTS Introduction Features Panel Desciptions Connecting and Operating the 4x2 HD-SDI Switcher RMT4-IR Installation Speci fi cations W arranty 1 2 3 4 5 6 7.
Congratulations on your purchase of the ex•tend•it 4x2 HD-SDI Switcher . Y our complete satisfaction is very important to us. Readily Access One of Four Sources with One or T wo Displays 4 Sources.
FEA TURES Features • Saves money—use one or two displays to access four sources • Saves space—eliminates unnecessary hardware while increasing ef fi ciency • Saves time—switch between sources in an instant using the RMT -4 IR remote.
P ANEL DESCRIPTIONS Connects to 5VDC powersupply SDI Out 1 3 SDI Out 2 SDI In 1 SDI In 2 SDI In 3 SDI In 4.
CONNECTING AND OPERA TING THE 4X2 HD-SDI SWITCHER How to Connect the 4x2 HD-SDI Switcher to your devices 1 Connect your HD-SDI inputs into Input 1 thru 4 on the 4x2 HD-SDI Switcher . 2 Connect one or two displays into the outputs. 3 Connect the 5VDC power supply into the 4x2 HD-SDI Switcher .
RMT4-IR INST ALLA TION 5 1. Remove battery cover from the back of the RMT4-IR remote. 2. V erify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery , hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down.
SPECIFICA TIONS 6 • Input/Output: SDI - SMPTE 259M-C (270Mbps);HD-SDI - SMPTE 292M (1.485, 1.485/ 1.001 Gbps); NTSC; P AL: 720p @ 60, 59.94, 50Hz 1080p @ 30, 29.97, 25, 24 & 23.98Hz, 1080i @ 60, 59.94, 50, 48 & 47.95Hz • Power Supply: 5VDC • Power: external adapter with locking power connector • Dimensions: 3.
Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc.
.
.
.
.
*EXT-hdsdi-442* 6265 Variel Avenue Woodland Hills, CA 91367 1-800-545-6900 818-884-6294 fax: 818-884-3108 www.gefen.com gsinfo@gefen.com.
An important point after buying a device Gefen 4x2 HD-SDI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen 4x2 HD-SDI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen 4x2 HD-SDI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen 4x2 HD-SDI you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen 4x2 HD-SDI will certainly help you make a decision on the purchase.
If you already are a holder of Gefen 4x2 HD-SDI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen 4x2 HD-SDI.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen 4x2 HD-SDI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen 4x2 HD-SDI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
