Instruction/ maintenance manual of the product TP38 Geemarc
Go to page of 12
Telephone F eature telephone TP38 c lip User guide.
2 1. INST ALLA TION 1.1 T o Install the Batteries Batteries are required for the Caller ID function and telephone operation of the unit. T o open the battery door and install the batteries, follow the procedure below : 1. Open the battery door by pulling back the latch.
3 1.4 Hanging the Phone on the Wall Y our telephone is also suitable for wall mounting. Use two screws for fixing. Drill two holes vertically , one above the other , 67mm apart, and leave the screws protruding from the wall by 5mm. Now place the telephone without the desk support over the screws and push it slightly downwards.
4 3. TELEPHONE Operation 3.1 Dialling a Call 1. Pick up the handset or press button (the speaker LED will light and the dis- play will show “ ”) and wait for a dial tone. 2. Press the keypad for the telephone number you wish to dial. The display will show the number that you dialled on the keypad.
5 3.5 Redial T o redial the last number called: 1. Lift the handset or press button. 2. Press the REDIAL button. Noted : The last number dialed manually (up to 32 digits long) can be redialed.
6 4 The Phone Book IMPORT ANT : When using the phone book features, please note it is only avail- able at data bank mode (CLIP icon turns off). If the CLIP icon is on, press CALLER ID/DA T A BANK button once. Y ou can store 100 telephone numbers with associated names in the phone book.
7 4.3 T o review the Phone Book Memory Enter the initial letter of the name of the person you wish to call using the number pad. After a short time, the display will show the first stored telephone number with this initial letter . Y ou can now search for further numbers under this letter by turning the jog dial to the right.
8 4.5 T o Delete the Phone Book Memory 1. Select the required location from the phone book by rotating the jog dial. 2. T o delete single memory , press DELETE button once.
9 • If the name and number are not available due to the caller’s restriction, the dis- play shows “PRIV A TE” with the time and date received. The NEW icon turns on and NEW CALL LED blinks. • If the name and number are not available, the display will show “UNA V AILABLE” with the call’s time and date.
10 5.3 Erase the Caller ID Memory 1. Select the required Caller ID memory location by rotating the jog dial. 2. T o delete single memory , press DELETE button once. The display will show the “DELETE?”. Press DELETE button for 2 seconds. The data for that call will be erased, and the CALL# and Caller ID information will be updated.
11 6 General Information 6.1 Approval The apparatus is approved for connection to direct exchange lines and to approved, compatible P ABX’s. It cannot be guaranteed that the apparatus will operate cor- rectly under all conditions when connected to some P ABX’s.
UGTP38CLIP / ED01 For product support and help visit our website at www .geemarc.com telephone 01707 384438 or fax 01707 372529 LIB955YY.
An important point after buying a device Geemarc TP38 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Geemarc TP38 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Geemarc TP38 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Geemarc TP38 you will learn all the available features of the product, as well as information on its operation. The information that you get Geemarc TP38 will certainly help you make a decision on the purchase.
If you already are a holder of Geemarc TP38, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Geemarc TP38.
However, one of the most important roles played by the user manual is to help in solving problems with Geemarc TP38. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Geemarc TP38 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
