Instruction/ maintenance manual of the product ZSC2201 GE
Go to page of 16
Installation Instructions Advantium ® 240V Built-In SpeedCook Ovens PSB2200 PSB2201 ZSC2200 ZSC2201 ZSC2202 49-40574-1 MFL06213302 02-08 JR.
Safety Information 2 CONTENTS Design Information Models Av ailable ......................................................................2 Product Dimensions and Clearances ............................3 T ools and Parts Required ......................
Design Information 3 PRODUCT DIMENSIONS AND CLE ARANCES NOTE: Appearance will vary by model. 13” 13/16” 21 1/2” 19 1/32 ” 29 3/4 ” T OOLS AND P ARTS REQUIRED (NO T SUPPLIED ) #2 Phillips.
Installation Pr eparation 4 ELECTRICAL REQUIREMENTS Single Speedcook Installation Product rating is 120/208 or 120/240 volt , 60 Hz, 30 amps. This pr oduct must be connected to a supply circuit of the proper voltage and fr equency and protected by a time delay fuse or circuit br eaker .
5 Installation Pr eparation Pr eparation WITHOUT an Accessory St orage Drawer PREP ARE THE OPENING (CONT .) Installation over a GE/Monogram Warming Drawer : NO TE: Additional clearances between the cutouts may be required. Check to be sur e the oven supports above the Warming Drawer location do not obstruct the r equired interior depth and height .
Installation Pr eparation 6 Pr eparation WITHOUT an Accessory St orage Drawer PREP ARE THE OPENING (CONT .) Installation over a GE/Monogram Oven and Warming Drawer : NO TE: Additional clearances between the cutouts may be required.
7 Installation Pr eparation Pr eparation WITH an Accessory St orage Drawer NO TE: MODEL ZSC2202 CANNO T BE INST ALLED WITH AN A CCESSORY ST ORAGE DRAWER.
8 Installation Pr eparation Pr eparation WITH an Accessory St orage Drawer NO TE: MODEL ZSC2202 CANNO T BE INST ALLED WITH AN A CCESSORY ST ORAGE DRAWER. SEE INST ALLA TION PREP ARA TION WITHOUT AN ACCESSORY STORA GE DRAWER FOR THIS MODEL . PREP ARE THE OPENING (CONT .
9 Installation Instructions • Remove all packing material and tape. • Locate parts package containing mounting scr ews. • Remove the oven from the carton. Do not lift unit by handle or conduit . Two people ar e required to lift this oven. • Open the door and remove any packaging in oven.
Installation Instructions 10 ROUTE CONDUIT THR OUGH CUT OUT (C ONT .) When connecting to a 3-conduct or branch circuit: • Connect oven red lead to branch circuit red lead. • Connect oven black lead to branch circuit black lead. • Connect oven green ground lead and white lead to branch circuit neutral (white or gray).
11 Installation Instructions INST ALL BO T TOM TRIM NO TE: If installing the Advantium 240 O v en with an accessory storage drawer , the bottom trim is not requir ed. Pr oceed to Step 4. • Align bottom trim tabs to slots in the bottom of the oven. • Secure the bottom trim to the bottom of the oven using 3 brass scr ews pr ovided.
NO TE: Appearance will vary by model. Assembly Instructions Advantium ® 240V Built-In Accessory St orage Drawer JX2200, JX2201, ZX2201 BEFORE YOU BEGIN Read these instructions completely and car efully. Read the Installation Instructions for the Advantium 240V oven completely and carefully for cutout dimensions and step-by-step instructions.
REMOVE P ACKA GING AND P AR TS • Remove the drawer fr om the carton. • Remove all packing material and tape. • Open the drawer and remove any parts inside. • Locate parts. 1 ASSEMBL Y T O ADV ANTIUM 240V BUIL T-IN SPEEDCOOK OVEN Assembly Instructions Side S upports (2) Screws (2 Sets) ASSEMBLING THE OVEN T O DRA WER (CONT .
14.
15.
Printed in Kor ea NOTE: While per forming installations described in this book, safety glasses or goggles should be worn. NOTE: Product improvement is a continuing endeavor at General Electric. Therefor e, materials, appearance and specifications are subject to change without notice.
An important point after buying a device GE ZSC2201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE ZSC2201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE ZSC2201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE ZSC2201 you will learn all the available features of the product, as well as information on its operation. The information that you get GE ZSC2201 will certainly help you make a decision on the purchase.
If you already are a holder of GE ZSC2201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE ZSC2201.
However, one of the most important roles played by the user manual is to help in solving problems with GE ZSC2201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE ZSC2201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
