Instruction/ maintenance manual of the product ZSC1000 GE
Go to page of 12
Installation Instructions Advantium ™ 120 Built-In SpeedCook Ovens SCB1000 SCB1001 ZSC1000 ZSC1001 For a Spanish version of this manual, visit our W ebsite at ge.com. Para consultar una version en español de este manual de instrucciones, visite nuestro sitio de internet ge.
Safety Information CAUTION: For personal safety , remove house fuse or oven circuit breaker before beginning installation to avoid severe or fatal shock injury .
MODELS A V AILABLE Profile Models: SCB1000 WW – White SCB1000 BB – Black SCB1000 CC – Bisque SCB1001 SS – Stainless Steel Monogram Models: ZSC1000 BB – Black ZSC1001 SS – Stainless Steel 3.
4 ADV ANCE PLANNING • These ovens may be installed directly into a 27" or 30" wide oven cabinet. • The front surface of the oven will be nearly flush with surrounding cabinetry doors. • This oven can be installed over any GE or GE Monogram single electric built-in oven or a warming drawer or both.
5 Installation Preparation ELECTRICAL REQUIREMENTS Single Advantium 120 Installation: This product requires a 120 volt, 60 Hz, 15 amp circuit and draws 1.8 kilowatts. This product must be connected to a supply circuit of the proper voltage and frequency .
Installation Preparation PREP ARE THE OPENING (CONT .) Installation over a GE/Monogram Warming Drawer: NOTE: Additional clearances between the cutouts may be required. Check to be sure the oven supports above the Warming Drawer location does not obstruct the required interior depth and height.
7 Installation Preparation PREP ARE THE OPENING (CONT .) Installation over a GE/Monogram Oven and Warming Drawer: NOTE: Additional clearances between the cutouts may be required. Check to be sure the oven supports above the Warming Drawer location does not obstruct the required interior depth and height.
8 Installation • Align bottom trim tabs to slots in the bottom of the oven. • Secure the bottom trim to the bottom of the oven using 3 brass screws provided. SLIDE THE OVEN INTO THE CUTOUT CAUTION: T wo people are required to lift the oven into the opening.
9 Installation INST ALL SIDE TRIM FOR 30" CABINET INST ALLA TION ONL Y . SKIP THIS STEP IF YOU HA VE 27" WIDE CABINETRY . • Open the oven door . • Hang the side trim pieces on the tabs behind the oven flange.The screw holes in the side trim should align with the holes in the oven flange.
10 Notes.
11 Notes.
NOTE: While performing installations described in this book, safety glasses or goggles should be worn. NOTE: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice.
An important point after buying a device GE ZSC1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE ZSC1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE ZSC1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE ZSC1000 you will learn all the available features of the product, as well as information on its operation. The information that you get GE ZSC1000 will certainly help you make a decision on the purchase.
If you already are a holder of GE ZSC1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE ZSC1000.
However, one of the most important roles played by the user manual is to help in solving problems with GE ZSC1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE ZSC1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
