Instruction/ maintenance manual of the product ZPBS360 GE
Go to page of 2
BEFORE YOU BEGIN Read these instructions completely and carefully. • Not e to Installer – Be sure to leave these instructions with the Consumer . • Not e to Consumer – Keep these instructions with your O wner ’s Manual for future reference.
INST ALL GRILLE P ANEL • Remove the protective film from the appearance panel. • Raise the grille panel to the stop position. • Loosen the screws on the side trim behind the frame. Remove the bottom trim. • Slide the panel over the metal backer panel and into the trim.
An important point after buying a device GE ZPBS360 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE ZPBS360 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE ZPBS360 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE ZPBS360 you will learn all the available features of the product, as well as information on its operation. The information that you get GE ZPBS360 will certainly help you make a decision on the purchase.
If you already are a holder of GE ZPBS360, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE ZPBS360.
However, one of the most important roles played by the user manual is to help in solving problems with GE ZPBS360. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE ZPBS360 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
