Instruction/ maintenance manual of the product ZGU36N6 GE
Go to page of 12
If you have questions , call 800.GE.CARES or visit our website at: www .monogram.com Installation Instructions Professional Gas Cooktops 48" Natural Gas Models ZGU48N4G ZGU48N6R ZGU48N6D 48".
Installation Instructions CAUTION: THESE COOKTOPS SHOULD BE INST ALLED IN CONJUNCTION WITH A SUIT ABLE OVERHEAD VENT HOOD. Due to the high heat capacity of this unit, particular attention should be paid to the hood and duct work installation to assure it meets local building codes.
22" High Backsplash With Warming Shelf 12" High Backsplash INST ALLA TION NOTE: A custom backspash may be constructed of non-combustible back wall materials such as ceramic tile, brick, marble or other stone. CONTENTS Design Information Models A vailable .
36" Wide Hood Refer to Hood Installation Instructions 12" Min. to Combustible Material Each Side 36" Min. to Combustible Material From Cooking Surface 13" Max. 7" 22-3/4" Min. Electric/Gas Supply 35" 1/2" 2" Cooking Surface 18" Min.
26-5/8" 12" 1/2" 8-7/16" Countertop Level 22-3/4" 23-1/4" 4" to Center Line of Gas Inlet on the Left Allow Additional Clearance Below the Burner Box for Gas Connecti.
POWER SUPPL Y LOCA TIONS Gas Supply: • The pressure regulator must be connected in series with the manifold of the cooktop and must remain in series with the supply line regardless of the type of gas being used. • The natural gas models are designed to operate at 5" water column pressure.
Measure carefully when cutting the countertop. Make sure sides of the opening are parallel. • These cooktops require 8" free space below the countertop to house the cooktop burner box. • Allow additional clearances below the burner box to install the regulator and make house supply connections.
Alternate Bracket Screw Holes “L” Bracket 8 INST ALL COOKTOP • Lower the cooktop into the opening. Make sure the cooktop is evenly seated and supported. A side frame gasket will seal the cooktop to the countertop. • “L” brackets with screws are provided to secure the cooktop to the countertop or to adjacent cabinetry .
Assemble burners as shown. Check to be sure that burner heads and caps are securely seated. Pin(s) must completely engage holes to ensure proper assembly .
10 FINALIZE INST ALLA TION Place the burner grates over the burners. Press corner of the grate to the cooktop. The grates should be seated and should not rock. The grill and griddle are secured with screws at the front. They are designed to be stationary and should not be removed.
11 INST ALL 9” or 12” HIGH BACKSPLASH • Install and level the range or cooktop according to the installation instructions. • Remove the backsplash packaging. Select the back, wall mount panel with mounting screw slots. • Mark a horizontal line on the wall, 1/8" above the range/cooktop backguard.
Pub. No. 49-80225-2 Part No. 164D4290P377 17713 Rev . 2 1 0-04 JR NOTE: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram ® local ser vice in your area, call 1.800.444.1845. NOTE: Product improvement is a continuing endeavor at General Electric.
An important point after buying a device GE ZGU36N6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE ZGU36N6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE ZGU36N6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE ZGU36N6 you will learn all the available features of the product, as well as information on its operation. The information that you get GE ZGU36N6 will certainly help you make a decision on the purchase.
If you already are a holder of GE ZGU36N6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE ZGU36N6.
However, one of the most important roles played by the user manual is to help in solving problems with GE ZGU36N6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE ZGU36N6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
