Instruction/ maintenance manual of the product ZFSB23D SS GE
Go to page of 12
Monogram. We bring good things to life. ® Installation Instr uctions Free-Standing Side-by-Side Stainless Steel Refrigerator ZFSB23D SS If you have questions , call 800-GE-CARES or visit our website at: www .
Safety Information CAUTION: Due to the weight and size of this refrigerator , and to reduce the risk of personal injur y or damage to the product - TWO PEOPLE ARE REQUIRED FOR PROPER INST ALLA TION.
Planning Information PRODUCT DIMENSIONS AND CLEARANCES This Monogram free-standing refrigerator requires the following clearances for proper air circulation, plumbing and electrical connections.
Installation Instructions 4 TOOLS REQUIRED • Tinsnips to cut banding • Stepladder • Bucket • Level • Appliance Hand T r uck • T ubing cutter • #2 Phillips screwdriver • Drill and appropriate bits • 3/8", 5/16" and 7/16" socket • Safety glasses MA TERIALS REQUIRED • 1/4 O.
Installation Instructions 5 STEP 1 MOVE REFRIGERA TOR INDOORS IMPOR T ANT : Door and passageways into the installation location require a 36" min. opening. If the opening is less than 36", the top cap and doors may need to be removed. NOTE: Skip this step if door removal is not required.
Installation Instructions 6 STEP 1 (continued) To move the refrigerator indoors: • Place a piece of the carton or soft cloth against the side panel of the refrigerator to pad and protect the stainless steel finish. • Place the refrigerator on the handtr uck with a side against the truck only .
Installation Instructions 7 Step 2A W A TER LINE INST ALLA TION WITH A REVERSE OSMOSIS SYSTEM Skip this step when not using RO System IMPORT ANT : When connecting to a GE reverse osmosis water system to your refrigerator , the GE RVKit must be used. For other reverse osmosis water systems, follow the manufacturer’s recommendations.
Installation Instructions 8 STEP 6 LEVEL REFRIGERA TOR The refrigerator can be leveled by adjusting the rollers located near the bottom hinges. Rollers at the rear can also be adjusted. • Use a 5/16" hex socket to turn the screws for the rear rollers.
Installation Instructions 9 STEP 8 ST AR T ICEMAKER • Flip the switch to I (ON) position. The icemaker will not begin to operate until it reaches its operat- ing temperature of 15 ° F (-9 ° C)or below . It will then begin operation automatically .
Notes 10.
Notes 11.
Note: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram ® local service in your area, call 1-800-444-1845. Note: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice.
An important point after buying a device GE ZFSB23D SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE ZFSB23D SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE ZFSB23D SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE ZFSB23D SS you will learn all the available features of the product, as well as information on its operation. The information that you get GE ZFSB23D SS will certainly help you make a decision on the purchase.
If you already are a holder of GE ZFSB23D SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE ZFSB23D SS.
However, one of the most important roles played by the user manual is to help in solving problems with GE ZFSB23D SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE ZFSB23D SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
