Instruction/ maintenance manual of the product UK-KIT-3S GE
Go to page of 16
UK-Kit-3S Model UK-KIT -3S for 22 ′ refrigerators with the freezer on the bottom. Safety Information . . . . . . . . . . 2 Operating Instructions How The Icemaker Works . . . . .3 How To Use Your Icemaker . . . .3 Troubleshooting Tips Before You Call For Service .
READ AND FOLLOW THIS SAFETY INFORMA TION CAREFULL Y . READ AND SA VE THESE INSTRUCTIONS SAFETY PRECAUTIONS IMPORT ANT SAFETY INFORMA TION. READ ALL INSTRUCTIONS BEFORE USING. For Y our Safety: Do not place fingers or hands in the automatic icemaking mechanism while the refrigerator is plugged in.
About the automatic icemaker . www .GEAppliances.com How the Icemaker W orks Water fills the empty cube mold when the freezer has cooled to freezing temperature. Cold air is forced directly over mold. When frozen, the cubes are moved up and out of the mold.
Before you call for service… T roubleshooting T ips Save time and money! Review the charts on the following pages first and you may not need to call for service. 4 Problem Possible Causes What T o Do Automatic icemaker Feeler arm is in the • Set the icemaker feeler arm to the ON (down) position.
www .GEAppliances.com Problem Possible Causes What T o Do Ice cubes stick together Ice not being used often enough. • Empty ice cube bucket more frequently. or “shrink” Ice forms in inlet tube Water pressure is too low. • Low water pressure can cause valve to leak.
BEFORE YOU BEGIN Installation UK-KIT -3S Icemaker Instructions Accessory Kit Read these instructions completely and carefully. • IMPORTANT – Save these instructions for local inspector’s use. • IMPORTANT – Observe all governing codes and ordinances.
Installation Instructions 7 BEFORE YOU BEGIN Ice Bucket Icemaker Water V alve Assembly Double Prong Plugs 5/8 ″ Icemaker Mounting Screws Owner’ s Manual, Installation Instructions and Warranty War.
Installation Instructions 8 INST ALLING THE ICEMAKER REMOVE THE ICE SERVICE RACK An ice service rack is mounted on knobs secured with screws in the left side of the freezer wall. • Remove ice trays and storage bin. • Carefully slide the ice rack up and off the mounting knobs.
Installation Instructions INST ALLING THE ICEMAKER HANG THE ICEMAKER ON FREEZER W ALL • Slip the stainless steel clip over the wall of the water cup. • Screw one 5/8 ″ icemaker mounting screw in the top front hole. Leave the head out approximately 3/8 ″ for the slot in the icemaker hanger to slip over the screw.
Installation Instructions W A TER V AL VE INST ALLA TION INSTRUCTIONS • Attach the water valve to the lower rail using the hex screws removed from the mounting plate.
Installation Instructions W A TER LINE INST ALLA TION INSTRUCTIONS WHA T YOU WILL NEED A cold water supply is required for automatic icemaker operation. Water pressure must be between 20 and 120 psi. Copper or GE SmartConnect™ Refrigerator Tubing, 1/4 ″ O.
Installation Instructions W A TER LINE INST ALLA TION INSTRUCTIONS TYPICAL PLUMBING INST ALLA TION WITH W A TER SUPPL Y KITS WX8X2, WX8X3 and WX8X4 Sealing washer Shutoff valve Ferrule Cold water pipe.
Installation Instructions W A TER LINE INST ALLA TION INSTRUCTIONS SET THE ICEMAKER FEELER ARM TO THE ON (DOWN) POSITION The icemaker will not begin to operate until it reaches its operating temperature of 15°F. or below. It will then begin operation automatically.
14 Notes..
15 Icemaker W arranty . All warranty service provided by our Factory Service Centers, or an authorized Customer Care ® technician. T o schedule service, on-line, 24 hours a day , visit us at www .GEAppliances.com, or call 800.GE.CARES (800.432.2737).
Printed in the United States Consumer Support. GE Appliances W ebsite www .GEAppliances.com Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day, any da.
An important point after buying a device GE UK-KIT-3S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE UK-KIT-3S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE UK-KIT-3S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE UK-KIT-3S you will learn all the available features of the product, as well as information on its operation. The information that you get GE UK-KIT-3S will certainly help you make a decision on the purchase.
If you already are a holder of GE UK-KIT-3S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE UK-KIT-3S.
However, one of the most important roles played by the user manual is to help in solving problems with GE UK-KIT-3S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE UK-KIT-3S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
