Instruction/ maintenance manual of the product TC28031 Series GE
Go to page of 46
Model 28011 Optional/Additional 5.8GHz Color Handset User ’s Guide for use ONL Y with Syst em 28031, T C28031, 28041 or T C28041 Series.
Equipment Approv al Information Your telephone equipment is appr oved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical R equirements for Telephone T erminal Equipment published by ACT A .
3 Inter ference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and () This device must accept any interference received, including interference that may cause undesired operation.
4 Table of Contents E quipmEnt A pprov Al i nformA tion ........2 i ntErfErEncE i nformA tion ....................3 H EAring A id c ompA tibilit y (HAc) ........3 l icEnsing ............................................3 fcc rf r AdiA tion E xp osurE s t A tEmEnt 3 i ntroduction .
5 p HonE b ook ..................................... 27 a DDing P hone B ook e ntries ............ 27 s toring the l ast n umBer D ialeD .....29 i nserting a P ause in the D ialing s equenCe ( of a s toreD n umBer ) r eVieWing P hone B ook r eCorDs ..
6 Introduction CAUTION: When using telephone equipment , there are basic safety instructions that should always be followed. Refer to the IMP OR T ANT SAFE TY INSTRUCTIONS provided with this product and save them for futur e reference.
7 Installation Digital Security Syst em Y our cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. INST ALLA TION NO TE: Some cordless telephones operate at frequencies that may cause or receiv e inter ference with nearby T Vs, microwave ov ens, and VCRs.
8 Handset Layout MENU (button) display SPEAKER (button) skip (button) # P AUSE/ RINGER (button) INTERCOM (button) erase (button) FLASH/ DELETE (button) PHONEBOOK (button) REDIAL (button) * EXIT (butto.
9 Installing the Phone Installing the Handset Battery NOTE: Y ou must connect the handset batt ery before using the cordless handsets. CAUTION: T o reduce the risk of fir e or personal injury, use only the Thomson Inc. approved Ni cke l- metal Hydride battery (Ni-MH) mo del 5-26 60, whi ch i s compatible with this unit .
10 Registration YOU MUST REGISTER THE HANDSET TO THE MAIN BASE BEFORE USE! Af te r th e op ti on al ha nd se t ha s ch ar ged f or 1 6 ho ur s on t he e xtr a ch ar ger , HANDSET NEEDS REGISTRA TION shows in the display. 1. Press the SELECT button. HOLD BASE P AGE W AIT FOR BEEP shows in the display.
11 PHONE SET TING Set display language, set area code, register the handset to the base unit , name the handset , deregister the handset or reset to default setting. DISPLA Y SET TING Choose a preset or downloaded image to be wallpaper of the idle display, set the contrast and color scheme.
1 NOTE: T o restore the default setting to “---” , press and release the FLASH/DELE TE button when SET AREA CODE shows on the display. Handset Name This menu allows you to enter a name for the handset , which displays on the idle screen. From the PHONE SET TING menu; 1.
13 4. Select NO , if you do not want to der egister . 5. If you select YES , pr ess the SELECT button to conrm. MOVE NEAR TO BASE displays for seconds, then NO YES CONFIRM? shows on the display. 6. Use the 6 or 5 button to scroll to NO or YES .
14 . Press the SELECT button to enter the menu. 3. Use the 6 or 5 button to scroll to NO or YES . The default is NO . 4. If you select YES , all the settings in the programmable menu are r eturned to factory default setting. Y ou will hear a conrmation tone.
15 Set Contrast This feature allows you change the contrast of the text display ed and the background. From the DISPLA Y SE T TING menu; 1. Use the 6 or 5 button to scroll to SET CONTRAST . . Press the SELECT button to enter the menu. 3. Use the 6 or 5 button to scroll to the desired contrast , 1, 2 or 3 .
16 . Press the SELECT button to enter the menu. 3. Use the 6 or 5 button to scroll to the desired ringer tone. The default is T ONE 1 . 4. Press the SELECT button to save y our selection. Y ou will hear a conrmation tone. Key T one From the SOUND SET TING menu; 1.
17 4. Use the number keys to enter your new 3-digit security code. 5. Press the SELECT button to save y our selection. You will hear a conrmation tone. NOTE: If y ou make a mistake, key in the digits again or press the FLASH/DELTE button to erase all and re-enter.
18 . Listen as the caller leaves a message. 3. Press the T ALK/CALL BACK or SPEAKER buttons to speak to the person or press the SELECT button to stop screening the call. T elephone Operation CHARGE/IN USE indicator on the base The CHARGE/IN USE indicator is lit when the phone is in use or a handset is charging in the base charge cradle.
19 Flash/Call Waiting If you subs crib e to the com bine d C all Wait ing Call er I D se rvic e f rom your loc al t elep hone com pany , yo u wi ll rece ive Call er I D in form atio n ( if a vail able ) on Call Wai ting cal ls.
0 3. All register ed handsets beep for two minutes and P AGING FROM BASE shows on each handset’s display. 4. T o cancel the page, press the P AGE button on the base, or pr ess the T ALK/CALL BACK button or the *EXIT button on each handset .
1 Do Not Disturb (DND) This feature allows you to turn off all the handset ringer(s) at once,by pressing one button at the base unit , even though the ringer volume of handset(s) has been set to HIGH or LOW . 1. In the standby mode, press the DO NO T DISTURB button on the base.
3) While in room monitoring mode, the initiating handset can listen with the handset speakerphone by pressing the SPEAKER butt on once. Switch back to the earpiece by pressing T ALK/CALL BACK button once. Press the *EXIT button to end room monitoring.
3 Using Intercom with External Telephone Calls During a telephone call, you may use the intercom/paging f unction to page another handset and have an off line, private (two-w ay) intercom conversation.
4 Call Transfer Transferring Calls to Other Handsets During an external call, you may transfer the external call from handset to handset . 1. During an external call, press the INT button to enter the inter com menu. . List of register ed handsets shows on the display.
5 • When y ou hear the call waiting beep in the handset receiver , press the FLASH/DELE TE button to put the current call on hold and answer the incoming call. Press FLASH/DELETE again to return to the original call. CID Error Codes Various Caller ID error messages may appear on the display.
6 . Use the 6 or 5 button to scroll to the desireD CID recor d. 3. Press the MENU button to show the CALL OPTIONS menu. 4. Use the 6 or 5 button to scroll to FORMA T . 5. Press the SELECT button to show all the available formats. 6. Use the 6 or 5 button to scroll to the desir ed format .
7 NOTE: If the selected CID recor d contains any information that is non-numeric, the unit will not allow this record to transfer to the phone book . Deleting a CID Recor d 1. Make sur e the phone is OFF (not in T ALK mode). . Use the 6 or 5 button to scroll to the CID r ecord you w ant to delete.
8 1. Make sure y our phone is OFF (not in talk mode). . Press the MENU button and use t he 6 or 5 button to scroll to PHONE BOOK . 3. Press the SELECT button to enter the phone book. NOTE: Y ou may press the PHONEBOOK button t o shortcut t o the phone book, t oo.
9 Storing the Last Number Dialed Store a dialed number when r eviewing it: 1. Make sur e the phone is OFF (not in talk mode). . Press the REDIAL button on the handset to access the DIALED menu. 3. Use th e 6 or 5 button to scroll to desir ed record.
30 Editing a Phone Book Recor d 1. When reviewing the phone book r ecords list , use the the 6 or 5 button or the number keys to scroll to the desir ed record. . Press the SELECT button to view the details of the r ecord. 3. Press the SELECT button again to show the option menu.
31 3. Use th e 6 or 5 button or the number keys to scr oll to the desired record. 4. Press the T ALK/CALL BACK or SPEAKER button. The number dials automatically. Chain Dialing from Phone Book Use this feature to make calls which r equire a sequence of numbers, such as a calling card number used for a frequently called long distance number .
3 4. Y ou can select the following options to edit your image: Zoom In and Zoom Out , Adjust Brightness and Contrast , Rotate Left and Rotate Right , Adjust Color , Auto Resize the Image to t th.
33 Cued-up music typically produces the best sounding recor ded ringer . It is recommended to begin recor ding your ringer at the beginning of a song, rather than a portion from the middle to produce an audibly pleasing custom ringer . 1. Make sur e your phone is OFF (not in talk mode).
34 3. V erify the cable/headset is connected to your handset , then press the SELECT button again to start the count-down display. The handset will start recording and the second number will decrease automatically. 4. The recor ding will stop when the display counts down to 0 seconds.
35 IMPORT ANT NOTE: When you want to use the handset microphone to record ringer tones, DO NO T insert the Audio cable or the optional headset into the headset jack of the handset . Choosing the Recor ded Sound Clip as Ringer T one Refer to Section; "T elephone Setup/Sound Setting/Ringer Tone".
36 4. Insert the new battery pack and connect the cord to the jack inside the battery compartment . 5. Put the battery compartment door back on. 6. Place handset in the base or handset charge cradle to char ge. Allow the handset battery t o properly char ge (for 16 hours) prior to first use or when you install a new battery pack .
37 ENTER NAME Prompt telling you to enter the name in one of the 50 memory locations. ENTER NUMBER Prompt telling you to enter a telephone number in one of the 50 memory locations. HANDSET NAME Prompt telling you to enter the user name for the registered handset .
38 Handset Sound Signals Signal Meaning A long warbling tone (with ringer on) Signals an incoming call Three short beeps Page signal One long beep Conrmation tone for the completion of a function O.
39 Y ou experience static, noise, or fading in and out • The handset may be out of range of the base. Move closer to the base. • Make sure base is not plugged into an outlet with another household appliance. If necessary, relocate the base. • Charge the battery.
40 Caller ID Error Message • The unit displays this message if it detects anything other than valid Caller ID information during the silent period after the rst ring.
41 Ser vice If trouble is experienced with this equipment , for repair or warranty information, please contact customer service at 1- 800-448-0329 . If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolv ed.
4 Limited Warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year , from date of purchase. (The w arranty period for rental units begins with the rst rental or 45 days from date of shipment to the rental rm, whichever comes rst .
43 Limitation of Warranty: • The warranty stated above is the only w arranty applicable to this product . All other warranties, express or implied (including all implied w arranties of merchantability or tness for a particular purpose) are hereby disclaimed.
44 Index A Accessory Information 41 Adding Phone Book Entries 7 Advanced Intercom Featur es Answering a Call 18 Answering System Remote Access 16 Area Code 11 Assigning the Downloaded Image .
45 Installation 7 Installing the Handset Battery 9 Installing the Phone 9 Intercom Operation Interference Information 3 Introduction 6 K Key T one 16 L Language 11 Last Number Redial 19 Licensi.
Model 8011 00008008 (Rev . 1 Dom E/S) 06-7 Printed in China Thomson Inc. 10330 North Meridian St . Indianapolis, IN 4690-104 © 006 Thomson Inc.
An important point after buying a device GE TC28031 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE TC28031 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE TC28031 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE TC28031 Series you will learn all the available features of the product, as well as information on its operation. The information that you get GE TC28031 Series will certainly help you make a decision on the purchase.
If you already are a holder of GE TC28031 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE TC28031 Series.
However, one of the most important roles played by the user manual is to help in solving problems with GE TC28031 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE TC28031 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
