Instruction/ maintenance manual of the product ZXR859 GE Monogram
Go to page of 12
® If you have questions , call 800.GE.CARES or visit our website at: www .monogram.com Installation Instructions M o n o g r a m ZXR858, ZXR859 and ZXR8510 Recirculating Accessories For Model ZV850, .
Installation Preparation W ARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS, OBSER VE THE FOLLOWING: A. Use this unit only in the manner intended by the manufacturer .
Installation Preparation 3 REQUIRED ACCESSORIES This book provides step by step instructions to install the Monogram ZV850 ceiling mounted hood for recirculating operation. • One of the following accessory kits is required for non- vented ceiling mounted installations of model ZV850.
Installation Preparation 4 TOOLS AND MA TERIALS REQUIRED (NOT SUPPLIED) • T ape measure • Knife • Spirit level • Wire cutter/stripper • Wire nuts • Electric drill and 5/32” bit • Phill.
Installation Preparation 5 REMOVE THE P ACKAGING The vent hood is packed separate from the required accessory: ZXR858, ZXR859 or ZXR8510. • Remove the frame, cover , parts box, side bars and packaging. • Remove junction box cover . • Install strain relief onto junction box cover .
Installation Preparation 6 – The framing should be spaced 8-5/8” on the sides and 7-5/8” at the front from centerline to centerline to accept mounting screws in the vent support frame. Note: The cross framing must be spaced 8-3/4" on the side from centerline to centerline in order to accept the hood mounting screws.
Installation Instructions 7 3 INST ALL L O WER SUP POR T FR AME • Insert lower support frame (from required accessory ZXR858, ZXR859 or ZXR8510) into the upper support frame and loosely secure with 8 screws and washers (4 on the front and 4 on the back sides).
Installation Instructions 8 • T ape the wire to the front of the frame support to prevent damage during installation and service. Ceiling Support Frames Tape House Wiring Front Side 5 SIZE AND INST ALL DUCTWORK • Measure from top duct connector (Dim.
Installation Instructions 9 6 INST ALL DECORA TIVE DUCT COVERS • Pretap or drive decorative screw into the screw holes on the support frame. This will make screw installation easier . • Separate the two decorative duct covers. • Select the inside (top) cover , which has vent hole pattern at the top.
Installation Instructions 10 7 INST ALL HOOD Note: TWO PEOPLE ARE REQUIRED TO COMPLETE THIS INST ALLA TION! • Lift the hood up to the support frame. Carefully align the hood mounting studs into the support frame holes, and at the same time, guide the hood duct connector into the duct.
Upper Charcoal Filter Slots Grasp T ab, Lift and Pull Forward Installation Instructions 11 9 SLIDE DUCT COVER DOWN, INST ALL SIDE UTILITY BARS • Hold the decorative duct cover and remove the temporary stop screw from the support frame. Return the screw to the service manual envelope for future use.
Note: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram TM local service in your area, call 1.800.444.1845. Note: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice.
An important point after buying a device GE Monogram ZXR859 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE Monogram ZXR859 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE Monogram ZXR859 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE Monogram ZXR859 you will learn all the available features of the product, as well as information on its operation. The information that you get GE Monogram ZXR859 will certainly help you make a decision on the purchase.
If you already are a holder of GE Monogram ZXR859, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE Monogram ZXR859.
However, one of the most important roles played by the user manual is to help in solving problems with GE Monogram ZXR859. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE Monogram ZXR859 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
