Instruction/ maintenance manual of the product JTP86 GE
Go to page of 12
1 If you have questions, call 1.800.GE.CARES or visit our website at: ge.com 30 ” Built-In W all Oven with Microwave Installation Instructions JTP86, JT965 Before Y ou Begin Read these instructions carefully and completely . • IMPORT ANT —Save these instructions for local inspector ’ s use.
2 IMPORT ANT SAFETY INSTRUCTIONS Installation Instructions For Y our Safety • Be sure your oven is installed properly by a qualified installer or service technician. • Be sure the oven is securely installed in a cabinet that is firmly attached to the house structure.
3 Open oven door and remove literature pack, broiler pan and grid, and oven racks. Open microwave door and remove shelves and turntable package. Remove Installation Instructions from literature pack and read them carefully before you begin. Be sure to place all literature, Owner ’s Manual, Installations, etc.
4 Place the oven on a table or platform even with the cutout opening. (Platform must support 255 lbs.) Installation Instructions Pre-Installation Checklist cont. Remove the bottom trim from the top of the oven. It will be installed at the end of the installation process.
5 Cabinet Width 30 ” Recommended Minimum Cutout Location from Floor 21 5/8 ” Cutout Depth 23 1/2 ” Min. Cutout Width 28 1/2 ” Min. 28 5/8 ” Max.
6 Installation Instructions Electrical Connections ATTENTION INST ALLER All electric wall ovens must be hard wired (direct wired) into an approved junction box. A plug and receptacle is NOT permitted on these products. DO NOT shorten the flexible conduit.
7 Installation Instructions Electrical Connections cont. B4 Three-Conductor Branch Circuit Connection When connecting to a three-conductor branch circuit, if local codes permit: a. Connect the bare oven ground conductor with the crimped neutral (white) lead to the branch circuit neutral (white or gray in color), using a wire nut.
8 (Continued on following page) Installation Instructions Securing the Oven in the Opening Drilling the Pilot Holes and Mounting the Oven a. Drill through the mounting holes (top and bottom) of the side trim, for the #8 screws provided. b. Secure the oven to cabinet with screws provided.
9 a. With oven installed, take the bottom trim and center it on the bottom front edge of the cabinet opening. b. Using the trim as a template, mark the center of each slot (two total) where the mounting holes will be drilled. c. Remove the trim. d. Drill pilot holes into the center of each template mark.
10 Lift the oven door by placing one hand on each side. The door is heavy , so you may need help. Do not lift the door by the handle. With the door at the same angle as the removal position (half way between the closed and broil stop position, seat the notch of the hinge arm into the bottom edge of the hinge slot.
11 Installation Instructions Remove all protective film, if present, and any stickers. Check to be sure that all wiring is secure and not pinched or in contact with moving parts. Pre-T est Checklist Check that the bottom trim is installed properly (see page 9).
12 NOTES.
An important point after buying a device GE JTP86 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE JTP86 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE JTP86 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE JTP86 you will learn all the available features of the product, as well as information on its operation. The information that you get GE JTP86 will certainly help you make a decision on the purchase.
If you already are a holder of GE JTP86, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE JTP86.
However, one of the most important roles played by the user manual is to help in solving problems with GE JTP86. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE JTP86 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
