Instruction/ maintenance manual of the product DNSB514 GE
Go to page of 24
Safety Instr uctions . . . . . . . . 2–5 Operating Instr uctions Automatic Settings . . . . . . . . . 8, 9 Control Panels . . . . . . . . . . . . 6, 7 Controls Features . . . . . . . . . . .12 Cycle Options . . . . . . . . . . . . . .13 Cycle Status .
2 Operating Instructions Safety Instructions Consumer Support T roubleshooting T ips IMPORT ANT SAFETY INFORMA TION. READ ALL INSTRUCTIONS BEFORE USING.
■ Properly ground dryer to conform with all governing codes and ordinances. Follow details in Installation Instructions. ■ Install or store where it will not be exposed to temperatures below freezing or exposed to the weather . ■ Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload.
4 IMPORT ANT SAFETY INFORMA TION. READ ALL INSTRUCTIONS BEFORE USING. W ARNING! YOUR LAUNDRY AREA ■ Keep the area underneath and around your appliances free of combustible materials (lint, paper , rags, etc.), gasoline, chemicals, and other flammable vapors and liquids.
WHEN NOT USING YOUR DRYER ■ Grasp the plug firmly when disconnecting this appliance to avoid damage to the cord while pulling. Place the cord away from traffic areas so it will not be stepped on, tripped over or subjected to damage.
6 Operating Instructions Safety Instructions Consumer Support T roubleshooting T ips Model DPSB513 Model DPSB519 O NE T OUCH Quick Start Guide • Clean lint filter • Add clothes • Select dry cycl.
7 Consumer Support T roubleshooting T ips Operating Instructions Safety Instructions Model DPXB515 Y ou can locate your model number on the label on the front of the dryer , behind the door . NOTE: Any time you make a selection that is incompatible with the chosen dry cycle, the dryer will beep twice.
8 Operating Instructions Safety Instructions Consumer Support T roubleshooting T ips PRESS... AUTOMA TICALL Y SELECTS... THEN PRESS... For cottons and most linens.
9 Consumer Support T roubleshooting T ips Operating Instructions Safety Instructions PRESS... AUTOMA TICALL Y SELECTS... THEN PRESS... Special Dry Cycles are customized to provide optimum drying for a variety of fabrics and clothing types. Special Dry Cycles.
10 Operating Instructions Safety Instructions Consumer Support T roubleshooting T ips DRYEL ™ (on some models) This feature is designed for use with the DR YEL ™ “dry-clean only” fabric care system.
11 Consumer Support T roubleshooting T ips Operating Instructions Safety Instructions MORE DRY Use for heavy-duty fabrics. DRY Use for a normal dryness level suitable for most loads. This is the preferred cycle for energy saving. LESS DRY Use for lighter fabrics.
12 Operating Instructions Safety Instructions Consumer Support T roubleshooting T ips E ST . T IME R EMAINING E ST . T IME R EMAINING ST ART ■ Press twice to select the last cycle you used and start the dryer . ■ If you have selected a new cycle, press once to start the cycle.
13 Consumer Support T roubleshooting T ips Operating Instructions Safety Instructions About cycle options. NOTE: Not all features are available on all dryer models. GEAppliances.com (Appearance and features may vary) SIGNAL Alerts you that the cycle is complete.
14 Operating Instructions Safety Instructions Consumer Support T roubleshooting T ips E ST . T IME R EMAINING These cycle status indicator lights display what part of the cycle the dryer is in and remind you to clean the lint filter . About cycle status.
15 Consumer Support T roubleshooting T ips Operating Instructions Safety Instructions Drum Lamp Before replacing the light bulb, be sure to unplug the dryer power cord or disconnect the dryer at the household distribution panel by removing the fuse or switching off the circuit breaker .
16 Operating Instructions Safety Instructions Consumer Support T roubleshooting T ips Reversing the Door T ools needed: ■ Standard #2 ■ T ape-tipped Phillips screwdriver putty knife Open the door and remove the filler plugs opposite the hinges. With the door completely open, remove the bottom screw from each hinge on the dryer face.
17 Fabric Care Labels Machine wash cycle Normal Permanent Press/ wrinkle resistant Gentle/ delicate Hand wash Do not wash Do not wring Water temperature Hot (50 ° C/120 ° F) Warm (40 ° C/105 ° F) .
18 Correct V enting Incorrect V enting Operating Instructions Safety Instructions Consumer Support T roubleshooting T ips For the best drying per formance the dryer needs to be properly vented. The dryer will use more energy and run longer if it is not vented to the below specifications.
19 Consumer Support T roubleshooting T ips Operating Instructions Safety Instructions T roubleshooting T ips Save time and money! Review the charts on the following pages, or visit GEAppliances.com . Y ou may not need to call for service. OPERA TION Possible Causes What T o Do Control pads not Controls accidentally put in • Press STOP .
20 OPERA TION Possible Causes What T o Do The DRY dryness level Load consists of a mixture • When combining heavy and light fabrics in a load, was chosen but load is of heavy and light fabrics choose MORE DRY . still damp Exhaust system is blocked • Inspect and clean exhaust system.
21 LAUNDRY PRACTICES Possible Causes What T o Do Static occurs No fabric softener was used • T r y a fabric softener . • Bounce ® Fabric Conditioner Dryer Sheets have been approved for use in all GE Dryers when used in accordance with the manufacturer’ s instructions.
22 Operating Instructions Safety Instructions Consumer Support T roubleshooting T ips Notes..
23 ■ Ser vice trips to your home to teach you how to use the product. ■ Improper installation. ■ Failure of the product if it is abused, misused, or used for other than the intended purpose or used commercially . ■ Replacement of house fuses or resetting of circuit breakers.
Printed in Canada Consumer Support. GE Appliances W ebsite GEAppliances.com Have a question or need assistance with your appliance? T r y the GE Appliances W ebsite 24 hours a day , any day of the year! For greater convenience and faster service, you can now download Owner’s Manuals, order parts, catalogs, or even schedule service on-line.
An important point after buying a device GE DNSB514 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE DNSB514 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE DNSB514 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE DNSB514 you will learn all the available features of the product, as well as information on its operation. The information that you get GE DNSB514 will certainly help you make a decision on the purchase.
If you already are a holder of GE DNSB514, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE DNSB514.
However, one of the most important roles played by the user manual is to help in solving problems with GE DNSB514. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE DNSB514 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
