Instruction/ maintenance manual of the product 19211 GE
Go to page of 6
GE Model 19210/19211 www.jascoproducts.com Wireless Pushbutton Required Tools: Small flat blade screwdriver, drill, drill bit, and phillips scre wdriver. Included Hardware: (2) 3x20mm screws (2) Double sided adhesive pads Required Tools: Small flat blade screwdriver, drill, drill bit, and phillips scre wdriver.
ON: Add a jumper to a location OFF: Remove jumper from a location. 4. Remove or add the jum pers to match the table. 5. Store unused jumpers as shown. Parking the jumper on an open set of pins.
1. Remove batteries from the pushbutton by opening the case as shown below. 2. Locate the pushbutton jumpers shown below. Push Button Jumpers 3. Jumpers 1-6 are used to select 1 of 64 possible home security codes. 4. To change the house code, add or remo ve jumpers as needed.
b. Replacing the back cover 1. Push buttons are typically mounted at the same height as the door knob or handle (between 36" and 44" above the floor). 2. Before mounting, choose a mounting lo cation that is not farther than 150 feet from the chime unit location.
5. Drill two holes with 3/32” size drill in marked locations. 6. Secure back cover to the mounting su rface with two supplie d mounting screws. 7. Press front housin g onto back cover. 8. Test operation. If the chime does not work, see TROUBLESHOOTING.
1. This device may not cause harmful interference, and 2. This device must accept interference received, including any interfer ence that may cause undesired operation. For technical support contact Jasco Pr oducts Company at 1-800-654-8483 or www.jascoproducts.
An important point after buying a device GE 19211 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE 19211 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE 19211 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE 19211 you will learn all the available features of the product, as well as information on its operation. The information that you get GE 19211 will certainly help you make a decision on the purchase.
If you already are a holder of GE 19211, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE 19211.
However, one of the most important roles played by the user manual is to help in solving problems with GE 19211. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE 19211 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
