Instruction/ maintenance manual of the product 610ESG Alto-Shaam
Go to page of 36
Combitherm ® Combination Ov en / Steamer E S GAS COM B IT OUCH ® S ERI ES 6•10 ES G 10•10 ES G 7•14 ES G 10•20 ES G 12•18 ES G 20•20 ES G • I N ST ALLA T I O N W164 N9221 W ater Street • P .O. Box 450 • Menomonee Falls, W isconsin 53052-0450 USA PHONE: 262.
i Delivery .......................................................................... 1 Unpacking ..................................................................... 1 Safety Procedur es and Precautions .............................. 2 Installation Installation Codes and Standards .
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 1. THE INFORMATION CONTAINED IN THIS MANUAL IS IMPORTANT FOR THE PROPER INSTALLATION OF THIS OVEN. PLEASE READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. IMPROPER CONNECTION OF THIS APPLIANCE WILL NULLIFY ALL WARRANTIES.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 2. CAUTION Used to indicate the presence of a hazard that can or will cause minor personal injury, property damage, or a potential unsafe practice if the warning included with this symbol is ignored.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 3. INSTALLATION SITE INSTALLATION INSTALLATION CODES & STANDARDS The following codes and standards ar e required for installation of this oven: AIR SUPPL Y , ELECTRICAL CONNECTIONS, W A TER CONNECTIONS, AND W ASTE W A TER DISCHARGE.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 4. INSTALLATION SITE INSTALLATION NOTE: Note dimensions required for doorways and aisles for access of the oven and pallet to the installation site. Transport the oven in an upright and level position only.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 5. INSTALLATION SITE INSTALLATION POSITIONING REQUIREMENTS q In order to ensure proper ventilation, a minimum distance of at least 6-inches (152mm) must be kept from the control panels side (left) of the oven and any adjoining surfaces.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 6. SITE INSTALLATION Lifting Ins tructions Do not lift in this area! Damage t o the components will r esult. Cent er of Gra vity Front View T op View (Fron t) Leg 24” Spacer Board Remov e banding befor e lift ing.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 7. INSTALLATION COMMON SPECIFICATIONS q CombiGuard™ BWS Blended W ater System FI-28727 (INCLUDES 50 GALLON T ANK, 1 MEMBRANE &.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 8. 6 • 10 ES G B C D 2-15/16" (74mm) 2" (50mm) 47-5/16" (1201mm) 42-1/16" (1068mm) 40-1/8" (1018mm) 3.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 9. 10 • 10 ES G 21-11/16" (550mm) 5-3/16" (131mm) 42-1/16" (1068mm) 40-1/8" (1018mm) 37" (939mm) 34-5.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 10. 7 • 14 ES G D A B Water Drain (Bottom) (650mm) 8-1/2" (216mm) 25-5/8" 42" (1066mm) 5-1/8" (130mm) 31-3.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 11. 10 • 20 ES G 45-3/16" (1148mm) 42-7/16" (1077mm) 22-11/16" (575mm) 12-13/16" (325mm) Water Drain (Bott.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 12. 12 • 18 ES G 25-5/8" (650mm) 33-1/8" (840mm) 45-3/16" (1148mm) 42-7/16" (1077mm) 22-11/16" (575mm.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 13. 20 • 20 ES G [A,B] 4-3/8" (110mm) [D] 4-9/16" (116mm) [C] 3-9/16" (89mm) Water Drain (Side Back) [D] 4-5/8&.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 14. INSTALLATION ELECTRICAL An electrical wiring diagram is located behind the control panel on the left side of the oven. This appliance must be branch circuit pr otected with proper ampacities, in accordance with the wiring diagram.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 15. INSTALLATION MOBILE EQUIPMENT RESTRAINT The gas Combitherm must use a connector that complies with The Standard for Connectors for Movable Gas Appliances , ANSI Z21.69 CSA 6.16 and addenda Z21.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 16. INSTALLATION VENTILATION REQUIREMENTS An adequate ventilation system is requir ed for commercial cooking equipment. Information may be obtained by writing to the National Fire Pr otection Association, Batterymarch Park, Quincy , MA 02269.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 17. INSTALLATION GAS SUPPLY & INSTALLATION The Alto-Shaam gas Combitherm has been set to operate with either natural gas or propane as indicated on the identification name plate.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 18. INSTALLATION GAS SUPPLY & INSTALLATION Remove any tape or compound residue on all external thread connections before proceeding.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 19. INSTALLATION GAS SUPPLY & INSTALLATION The minimum size requir ement for gas piping or a flexible connector is 3/4 - inch (19mm). For long runs of gas piping, the pipe diameter must conform to the tables in the National Fuel Gas Code, ANSI/NFP A Z223.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 20. INSTALLATION GAS SUPPLY & INSTALLATION LEAk TESTING If a pressure leak test above 1/ 2 psi is to be performed on the bui.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 21. INSTALLATION WATER SUPPLY & INSTALLATION WARNING TO PREVENT WATER PIPES FROM BURSTING, INCOMING WATER SUPPLY SHOULD BE TURNED OFF WHEN THE APPLIANCE IS NOT IN USE. WARNING WATER SUPPLY MUST BE OPEN WHEN CLEANING PROGRAM IS ACTIVATED.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 22. INSTALLATION WATER SUPPLY & INSTALLATION WATER REQUIREMENTS WATER QUALITY MINIMUM STANDARDS TWO (2) COLD W A TER INLETS - DRINKING QUALITY ONE (1) TREA TED W A TER INLET : 3/4" NPT* ONE (1) UNTREA TED W A TER INLET : 3/4" NPT* LINE PRESSURE: 30 to 90 psi 2.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 23. INSTALLATION WATER VALVE WATER DRAINAGE s h u t - o f f v a l v e s h o w n i n t h e o f f p o s i t i o n NOTE: THE SHUT-OFF VALVE MUST BE IN THE OPEN POSITION WHEN THE OVEN IS BEING USED.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 24. Stand Pipe, 1-1/2" NPT (38mm) diameter T o Dr ain - Floor Sink - Air Gap to be within the first 12" (305mm) of the.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 25. INSTALLATION GREASE COLLECTION HOOK-UP ( i f eQuippeD w i t h t h i s featuRe ) • Grease Collection Hose Assembly is attached to the oven in the back. • Place Grease Collection Containers inside the tray of the Mobile Grease Collection Cart.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 26. COMBITOUCH® CHECKLIST Use this list as a final check of oven installation conformance. Damage directly attributed to improper set up, installation, or cleaning can invalidate warranty claims.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 27. INSTALLATION This section is provided for the assistance of qualified technicians only and is not intended for use by untrained or unauthorized service personnel.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 28. INSTALLATION Error Code Error Call Out in Display Description of Error Possible Cause E13 Boiler Temperature High Boiler temperature overheats — Scale build up inside steam generator.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 29. INSTALLATION ERROR CODES Error Code Error Call Out in Display Description of Error Possible Cause E34 Steam Generator Drain Pump Fault Water level in steam generator does not drop during cleaning program — Scale build up inside the steam generator drain pump.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 30. see m o to r c o n t r o l e r r o r c h a rt o n n e x t pag e INSTALLATION ERROR CODES Error Code Error Call Out in Display Description of Error Possible Cause E57 No Rinse Water During rinse no water fl ow is detected through solenoid valve — Water supply is shut off.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 31. INSTALLATION Type of Error Indication Release of Error Undervoltage LED fl ashing sequence, with 1 fl ash per period. Voltage of intermediate circuit is less than 250V Overvoltage LED fl ashing sequence, with 2 fl ashes per period.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 32. INSTALLATION ERROR CODES When the oven malfunctions, an error code will appear in the display . PRESS THE ST AR T ICON TO ACKNOWLEDGE THE ERROR. The icons that begin to flash repr esent operational modes that are still usable.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 33. ORIGINAL EQUIPMENT LIMITED WARRANTY Alto-Shaam, Inc. warrants to the original purchaser that any original part that is found.
COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 34. W164 N9221 W ater Street • P .O. Box 450 • Menomonee Falls , W isconsin 53052-0450 • U.S.A. PHONE: 262.251.3800 • 800.558-8744 USA/CANADA F AX: 262.251.7067 • 800.329.
An important point after buying a device Alto-Shaam 610ESG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alto-Shaam 610ESG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alto-Shaam 610ESG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alto-Shaam 610ESG you will learn all the available features of the product, as well as information on its operation. The information that you get Alto-Shaam 610ESG will certainly help you make a decision on the purchase.
If you already are a holder of Alto-Shaam 610ESG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alto-Shaam 610ESG.
However, one of the most important roles played by the user manual is to help in solving problems with Alto-Shaam 610ESG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alto-Shaam 610ESG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
