Instruction/ maintenance manual of the product 98101 Gastroback
Go to page of 16
Instructions for use Meat Grinder / Cookie Attachment Accessor y Design Stand Mixer Advanced GASTROBACK ® Read all provided instructions before first usage! Model and attachments are subject to change Art.-Nr . 98101 98101_fleischwolfaufsatz_deskuechmaschadv_manual.
Important Instructions • The appliance is designed for normal household quantities. Do not operate or store the appliance outdoors or in damp or wet areas. • Before use, always make sure that the appliance and accessor y is properly and completely assembled.
1. spanner for the ring nut 2. ring nut 3. fine screen 4. coarse screen 5. scrape 6. scroll 7. housing 8. tray 9. food pusher 10. 2 litre storage container can be used as dust protection while storing the attachment or as meat tray when processing meat.
Meat Grinder Attachment Operating Before first use of the Meat Grinder Attachment Remove all promotional materials and packing as well as any foreign objects, but do not remove the model label. Before first use and after a long period of storage, clean the processing tools in warm soapy water (see ´Care and Cleaning`).
5. T ake the ring nut and screw it onto the thread of the housing turning it clockwise. Y ou can use the spanner to securely tighten the ring nut (picture D/E). NOTE: Do not tighten the ring nut too much to avoid over winding the thread. The Meat Grinder Attachment is now assembled and can be attached to the Design Standmixer Advanced.
W ARNING: Always make sure that the appliance is turned ´Off` before plugging in the power supply . 3. Plug the power supply cable into a mains socket. W ARNING: Never hold your face or other body parts over the feed chute when the motor is running because little pieces of food could be thrown out of the feed chute.
the provided spanner to loosen the ring nut. 5. T ake the screen, scrape and the scroll out of the housing (picture B). Care and Cleaning Clean the appliance directly after use and do not leave any food dr y on the sur faces of the appliance.
5. Wipe the appliance and power cord with a damp soft cloth. T ake care not to spill or drip water or any other liquids on the appliance. 6. Thoroughly dr y the appliance and all par ts of the appliance and attachment after each cleaning. Leave all parts dr y naturally where they are out of reach of young children.
The attachment moves or loosened while The attachment is not correctly assembled or not securely locked to operating. the attachment access. T urn the appliance ´Off` immediately . Operate according to the instructions ´Assemble the Meat Grinder Attachment`.
4. T ake the ring nut and screw it onto the thread of the housing turning it clockwise. Y ou can use the spanner to securely tighten the ring nut (picture C). NOTE: Do not tighten the ring nut too much to avoid over winding the thread. The Cookie Attachment is now assembled and can be attached to the Design Standmixer Advanced.
3. Plug the power supply cable into a mains socket. W ARNING: Never hold your face or other body parts over the feed chute when the motor is running because little pieces of food could be thrown out of the feed chute. Never push the food into the feed chute with your fingers or put foreign substances (hair , towels, cutler y) into the feed chute.
Dissemble the Meat Grinder Attachment 1. Switch ´Off` the appliance after use and disconnect the power supply cable from the mains socket. 2. T ake the tray out of the feed chute. 3. Press down the attachment ejector (picture A) and pull the Cookie Attachment out off the access opening.
a few minutes in warm soapy water and use a nylon cleaning brush or cleaning sponge for cleaning. Rinse all parts with running water and dr y them accurately . 4. Grease the scroll, cookie attachment and multi-shaped blade with salad oil to prevent air corrosion.
Recipes Almond Cookies 125g soft butter 150g sugar 250g flour 1 small egg 40g ground almonds 1/2 teaspoon baking powder lemon essence (optional) Cream butter and sugar together using the beater until the mixture is light and fluffy . Beat in egg, then fold in the sifted flour , baking powder , nuts and lemon essence.
30 Additional stainless steel bowl Art.-Nr .: 98103 Accessories for the Design Stand Mixer Advanced Y ou will get the accessories from your specialty retailer . Pasta Maker Attachment Art.-Nr .: 98100 Meat Grinder / Cookie Attachment Art.-Nr .: 98101 Food Slicer/ Shredder Attachment Art.
GASTROBACK GmbH Gewerbestraße 20 • D-21279 Hollenstedt/Germany http://www .gastroback.de • E-Mail: info@gastroback.de 98101_fleischwolfaufsatz_deskuechmaschadv_manual.
An important point after buying a device Gastroback 98101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gastroback 98101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gastroback 98101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gastroback 98101 you will learn all the available features of the product, as well as information on its operation. The information that you get Gastroback 98101 will certainly help you make a decision on the purchase.
If you already are a holder of Gastroback 98101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gastroback 98101.
However, one of the most important roles played by the user manual is to help in solving problems with Gastroback 98101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gastroback 98101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
