Instruction/ maintenance manual of the product 41127 Gastroback
Go to page of 10
Operating Instructions ELECTRICAL DESIGN ICE-CRUSHER GASTROBACK ® Art.-Nr . 41127 41127_elektr_design_eiscrusher_new_manual.qxp 20.12.2006 11:18 Seite 11.
Important Instructions • Always clean the appliance right after use and befor first usage. • Ensure the feeding chute is empty and place the ice container in position before turning on the appliance. Ensure that no foreign substance is getting into the feeding chute.
13 Important Safeguards Carefully read all instructions before operating and save the instructions for further reference. Do not attempt to use this appliance for any other than the intended use, described in these instructions. Any other use, especially misuse, can cause severe injur y or damage by electric shock, fire or moving mechanical parts.
14 counter or on inclined or wet surfaces or where it can fall. Keep the entire appliance away from direct sunlight and sharp edges. • Never leave the appliance unattended when the plug is connected to the power outlet.
15 • If you open the locking cap during operation pieces of ice could spout. • Never hold your face over the appliance during operation. Never open the locking cap with your hands during operation.
Carefully read all instructions before operating and save the instructions for further reference. The GASTROBACK electrical Ice-Crusher is intended for crushing ice that fits through the opening of the feeding chute. Do not use force filling in the ice cubes.
17 Operating the Ice-Crusher During operation melt water or condensation water can develop. Keep a dr y absorbent towel ready to dr y off running water on the working surface. W ARNING – T o avoid injur y by electric shock: Never let any water run underneath the appliance or place wet towels underneath it.
Empty the ice container the latest if the ice container is filled up to 3/4 of its height (see picture): 6. T urn the appliance off. 7. T ake out the ice container . A TTENTION: T urn the appliance off after 10 minutes to avoid overheating the motor and let the motor cool down for 10 minutes.
for this could damage the surfaces. Always handle the entire appliance with care and without violence. Dip the nylon washing brush in warm soapy water . Open the locking cap with your fingers and move the nylon brush in circles to clean the feeding chute.
run smooth again. Other wise return the entire appliance (including all parts and accessories) to an authorised ser vice centre for examination and repair . W aste disposal The appliance has to be deposed b y the definition of the regional waste disposal of electricalscrap.
An important point after buying a device Gastroback 41127 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gastroback 41127 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gastroback 41127 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gastroback 41127 you will learn all the available features of the product, as well as information on its operation. The information that you get Gastroback 41127 will certainly help you make a decision on the purchase.
If you already are a holder of Gastroback 41127, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gastroback 41127.
However, one of the most important roles played by the user manual is to help in solving problems with Gastroback 41127. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gastroback 41127 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
