Instruction/ maintenance manual of the product MAGNUM 6KM GarrettCom
Go to page of 46
www Garre t t C om c om .. www Garr et t C om c om .. Corporate Headquarters GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539-7437 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 i www Garre t t C om com .. Magnum ™ 6KM Mobile Ethernet Switch Hardware Installation and User Guide Part #: 84-00186Z (Rev.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 ii www Garre t t C om com .. Federal Communications Commission Radio Frequency Interferen ce Statement This equipment generates uses.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 iii www Garre t t C om com .. Table of Contents Page 1.0 SPECIFICATIONS ............................................................................... 1 1.1 Technical Speci fications .
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 iv www Garre t t C om com .. 6.0 TROUBLESHOOTING ...................................................................... 32 6.1 Before Calling for Assistance ..............
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 1 www Garre t t C om com .. 1.0 SPECIFICATIONS 1.1 Technical Specifications Performance Filtering / Forwarding Rate: Ethernet (10Mb): 14,880 pps Fast Ethernet (100Mb): 148,800 pps Gigabit Ethernet (1000Mb): 1,488,000 pps Switching Processing Type: Store and Forward with IEEE 802.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 2 www Garre t t C om com .. 1000BASE-ZX, full duplex, single-mode (9 μ m cable) - >70km Copper 10/100Mb connector types supporte.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 3 www Garre t t C om com .. AC Power Supply (Internal) AC Power Connector: RD24 locking, male 100-240VAC Power Input, 47 to 63 Hz (auto-ranging) Power Consumption: 15 watts Max. (for a fully load ed fiber model with 2Gb) 10 watts Max.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 4 www Garre t t C om com .. 1.2 Ordering Information MODEL DESCRIPTION Magnum 6KM-110VDC : Magnum 6KM Mobile Ethernet Switch, base unit with four 10/100 M12 copper ports in slot A.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 5 www Garre t t C om com .. Following modules can be c o nfigur e d in Slot C only (Slot C is 10/100 M12 or 100Mb Fiber only) Magnum.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 6 www Garre t t C om com .. 2.0 INTRODUCTION 2.1 Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage that you believe occurred during shipment or delivery.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 7 www Garre t t C om com .. 2.2 Product Description - Magnum 6KM Mobile Ethernet Switch Magnum™ 6KM Mobile Ethernet Switches provide configurability in Heavy Duty mobile networking applications.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 8 www Garre t t C om com .. The 6KM managed switches also provide s a PoE option via power –inside PoE base unit (6KMP-48VDC) on Slot A and allows the users to utilize up to 4-ports of PoE or 8-ports with additional PoE module (P 6KM4-4M12) on Slot C to support 802.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 9 www Garre t t C om com .. When the Magnum 6KM Switch detects th at its free buffer queue space is low, the Switch sends industry standard (full-duplex only) PAUSE packets out to the devices sending it packets to cause “flow control”.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 10 www Garre t t C om com .. 2.4 Features and Benefits M12 Copper connections Magnum 6KM Switches utilize M12 connector s to withstand shock and vibration. Ideally suited for the harshest of mobile applications.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 11 www Garre t t C om com .. MNS-6K-SECURE (optional, for extra security ) Magnum MNS-6K-SECURE software is de signed for those customers demanding extra security in their networks.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 12 www Garre t t C om com .. 3.0 INSTALLATION Before installing the equipment, it is necessary to take the following precautions: 1.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 13 www Garre t t C om com .. 3.2 Connecting Ethernet Media The Magnum 6KM Switches are specifi cally designed to support standard Ethernet media types within a single Switch un it. (See Section 5.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 14 www Garre t t C om com .. NOTE: for Power Substations: In support of the IEEE 1613 Class 2 standard, GCI advises that, for substa.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 15 www Garre t t C om com .. Pair 1 Pin 6 = TX+ (MDI3+) Pin 4 = TX- (MDI3-) Pair 2 Pin 1 = TX- (MDI0+) Pin 7 = TX+ (MDI0-) Pair 3 Pin 5 = RX+ (MDI1-) Pin 8 = RX- (MDI1+) Pair 4 Pin 2 = RX+ (MDI2-) Pin 3 = RX- (MDI2+) Fig 3.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 16 www Garre t t C om com .. 3.3 DIN-Rail Mounting the Magnum 6KM The Magnum 6KM is designed for use in a “factory floor” industrial environment.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 17 www Garre t t C om com .. For best cooling of the 6KM, attach the metal brackets to metal (rather than wood or plastic). Attaching to metal helps conduct heat away from the 6KM through the metal brackets and into the metal support structure.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 18 www Garre t t C om com .. Fig 3.3.1b Panel / Wall Mounting position 2: The unit is mounted using the brackets as shown in the illustration above. The spacing for the mounting screws into the supporting wall or panel is a rectangle 2.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 19 www Garre t t C om com .. 3.4 Powering the Magnum DC 6KM Mobile Ethernet S witches The DC internal power supply supports installation environments where the DC voltage is from 10 to 300 volts, dependi ng on the 6KM model selected.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 20 www Garre t t C om com .. 3.5 Alarm Contacts for monitoring in ternal power, and So ftware Traps The Alarm Contacts feature, stan.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 21 www Garre t t C om com .. 3.6 Connecting the Console Terminal to Magnum 6KM The 6KM Console port, used to access the managed s witch’s software, has an 8-pin M12 (male) port.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 22 www Garre t t C om com .. NOTE for Power Substations : In support of the IEEE 1613 Class 2 standard, GCI advises that, for substation applications, the (M12) console ports are intended for temporary connectivity to other equipm ent such as PCs.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 23 www Garre t t C om com .. 4.2 Auto-Cross(MDIX) and Auto-negotiation, for M12 ports The M12 ports independently support au to-cros.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 24 www Garre t t C om com .. -- the second of the two connected devices is powered up*, i.e., when LINK is established for a port, or -- the LINK is re-established on a port after being lost temporarily.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 25 www Garre t t C om com .. 4.4 Power Budget Calculations for 6KM Modules with Fiber Med ia Receiver Sensitivity and Transmitter Power are the parameters necessary to compute the power budget.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 26 www Garre t t C om com .. 5.1.1 6KM Module LED designations PWR LED= ON, when Pow er is being supplied to the unit.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 27 www Garre t t C om com .. LC (100Mb) Fiber port, 2 LED per port L/A LED: ON = LINK established BLINKING = ACTIVITY F/H LED: ON = .
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 28 www Garre t t C om com .. 5.1.2 6KM4-4M12, 4 x 10/100Mb M12 (Slot C) The 6KM4-4M12 4-port Copper module provides four 10/100Mb switched M12 ports.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 29 www Garre t t C om com .. 5.1.3 P6KM4-4M12, 4 x PoE M12 (Slot C) The 6KM is available with the opti on of having PoE capabilities on the four M12 ports in slot C.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 30 www Garre t t C om com .. 5.1.4 6KM4-4MLC, 4 x Multimode LC (Slot C) The 6KM4-4MLC 4-port Fiber module provides four 100Mb Multimode LC Fiber ports.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 31 www Garre t t C om com .. 5.1.6 6KM-2GM12, 2 x Gigabit M12 (Slot B) The 6KM-2GM12 2-port Copper Gigabit module provides two fixed 10/100/1000Mb M12 ports in slot B. There are two LEDs provided for each Gigabit port.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 32 www Garre t t C om com .. 6.0 TROUBLESHOOTING All Magnum Ethernet products are designed to provide reliability and consistently high performance in all network environments . The installation of a Magnum 6KM Switch is a straight forwar d procedure.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 33 www Garre t t C om com .. 2. An accurate list of GarrettCom product model(s) involved, with serial number(s). Include the date(s) that you purchased the products from your supplier.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 34 www Garre t t C om com .. 6.4 Shipping and Packaging Information Should you need to ship the unit back to GarrettCom, please follow these instructions: 1. Package the unit carefully.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 35 www Garre t t C om com .. APPENDIX B: DC Single Source Power Input B1.0 Specifications for Magnu m 6KM Switches, DC Power at 12, 24, –48, 110, 125 and 250VDC Power input Each Magnum Model 6KM Managed Switch re quires DC power input, at 12, 24, 48, 110, 125 and 250VDC nominal.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 36 www Garre t t C om com .. B2.0 12, 24, –48, 110, 125 and 250VDC POWER, THEORY OF OPERATION The 12, 24, - 48VDC, 110, 125 and 25.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 37 www Garre t t C om com .. NOTE: The GND should be hooked up first. The 6KM unit has a floating ground, so the user may elect to Grou nd either + or - ter minal to suit the customer ’s use.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 38 www Garre t t C om com .. APPENDIX C: DC Dual Source Power Input C1.0 SPECIFICATIONS, DUAL SOURCE DC POWER INPUT – FOR MAGNUM 6.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 39 www Garre t t C om com .. C2.0 MAGNUM 6KM, w i th DC Dual-Source option The 6KM Switch models with th e internal -48VDC, 12VDC, 2.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 40 www Garre t t C om com .. Standard 6KM (Dual Source) male DC Power Input connector : Pin 1= A + Pin 2= B + Pin 3= B - Pin 4= A - A= Primary circuit B= Secondary circuit NOTE: The GND should be hooked up first.
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 07/10 41 www Garre t t C om com .. APPENDIX D: AC P ow er Input D1.0 Specifications for Magnum 6KM-AC Switc he s, AC P ow er input The AC power input connector on the Magnum 6KM Mobile Switch is located on the left front of the unit.
An important point after buying a device GarrettCom MAGNUM 6KM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GarrettCom MAGNUM 6KM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GarrettCom MAGNUM 6KM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GarrettCom MAGNUM 6KM you will learn all the available features of the product, as well as information on its operation. The information that you get GarrettCom MAGNUM 6KM will certainly help you make a decision on the purchase.
If you already are a holder of GarrettCom MAGNUM 6KM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GarrettCom MAGNUM 6KM.
However, one of the most important roles played by the user manual is to help in solving problems with GarrettCom MAGNUM 6KM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GarrettCom MAGNUM 6KM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
