Instruction/ maintenance manual of the product Magnum 6K32T GarrettCom
Go to page of 67
i www Garre t t C om c om .. www Garre t t C om c om .. Corporate Headquarters GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539-7437 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) i www Garre t t C om c om .. Magnum 6K32T Managed Switch Hardw are Installation and User Guide Part #: 84-00138 (Rev.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) ii www Garre t t C om c om .. Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823Westinghouse Dr.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) iii www Garre t t C om c om .. TABLE OF CONTEN TS .......................................................................... Page 1.0 SPECIFICATIONS ...........................
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) iv www Garre t t C om c om .. 4.5 Flow-control, IEEE 802.3x standard .................................................. 41 4.6 Power Budget Calcul ations for Magnum 6K32T PM’s Error! Bookmark n 5.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) www Garre t t C om c om .. The Magnum Line ETHERNET CONNECTIVITY PRODUCTS "DESIGNED AND M ANUFACTURED IN THE US A" OVERVIEW GarrettCom, Inc.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 1 www Garre t t C om c om .. 1.0 SPECIFICATIONS 1.1 Technical Specifications Performance Filtering / Forwarding Rate: Ethernet:14,880 pps Fast Ethernet: 148,800 pps Gigabit Ethernet: 1,488,000 pps Switching Processing Ty pe: Store and Forward with IEEE 802.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 2 www Garre t t C om c om .. Fiber connec tor types supported: ST-type (twist-lock) SC-type (snap-in) MTRJ-ty pe Small Form F.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 3 www Garre t t C om c om .. For ( Optional ) DC inte rnal power supplies at –48VDC, 24VDC and 125VDC, including Dual Source options ( for continuity of operation when either of the DC input sources are interrupted) , see Appendices B and C.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 4 www Garre t t C om c om .. 1.2 Ordering Information Magnum Managed Switch MODEL DESCRIPTION Magnum 6K32T 24 10/100 RJ-45 po.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 5 www Garre t t C om c om .. GBIC-SXSC GBIC transceiver module for use in GBPM-xOTX.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 6 www Garre t t C om c om .. 2.0 Introduction 2.1 Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage that you believe occurred during shipment or delivery.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 7 www Garre t t C om c om .. 2.2 Product Description - Magnum 6K32T Managed Switch The Magnum 6K32T Managed Switch provides high port density, with up to 32 ports in a 1U rack-mount package.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 8 www Garre t t C om c om .. accommodated include standard 19” RETMA, ETS I, and 23” Telco. Input power m ay be AC, or –48VDC for Telco environments, or 24VDC for Industrial applications.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 9 www Garre t t C om c om .. Magnum 6K32T is easy to deploy, manage a nd maintain. Addresses of attached nodes are automatically learned and maintained, adapting the switching services to network changes and expansions to pr ovide pug-n-play operation.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 10 www Garre t t C om c om .. 2.2.2 Eight-port SFF fiber modules (6K8-MTRJ, 6K8-MLC), 100Mb fi ber Fig.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 11 www Garre t t C om c om .. 2.3 Eight-Port Copper Module, 6K8-RJ45 The 6K-Series’s 8-port Copper port module, model 6K8-RJ45, provides eight 10/100Mb switched RJ-45 ports.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 12 www Garre t t C om c om .. 2.2.4 Six-Port “4 + 2”Combo Modules, 4@ 10/100 RJ-45 and 2@100Mb fiber 4@RJ-45 + 2@ 100Mb S.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 13 www Garre t t C om c om .. The 4port @10Mb ST fiber modules be have the same as the 8@100Mb ST fiber modules except for the 10Mb speed. For port numbering, ports 1, 2, 5, 6 are present, ports 3, 4.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 14 www Garre t t C om c om .. port is by default configured to AUTO m ode, and can be fixed at 1000Mbps speed full- duplex mode at any time. The Gigabit fiber port has LEDs that indicate LK (Link status) and ACT (receiving activity) on that port when lit.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 15 www Garre t t C om c om .. devices sending packets to cause “flow cont rol”. This tells the sending devices to temporarily stop sending traffic, which allo ws a traffic catch-up to occur without dropping packets.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 16 www Garre t t C om c om .. 2.3 Features and Benefits Managed switching for high performance Eth ernet LANs Magnum 6K32T Switches provide non-blocking (all ports can run at full speed at once) performance with standard Managed Networks Software (MNS-6K) included.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 17 www Garre t t C om c om .. 2.4 Applications Magnum 6K32T Fiber Switches offer hi gh performance along with one or two modular slot options to fulfill the choice of copper/Fiber, 10,100 or 1000Mb requirements.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 18 www Garre t t C om c om .. fire hazards can be connected to one or two full duplex Gigabit Fiber ports. Full-duplex future proof fiber media can easily connect long distance subnets and provide a stable secure network to all applications.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 19 www Garre t t C om c om .. support of 10/100 and 1000Mb. The user can utilize the SNMP feature equipped with VLAN, Port security, 802.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 20 www Garre t t C om c om .. Example 4: In a “ (video+data)” application where a network being designed to catered the need of multicast and broadcast traffi c of higher bandwidth to provide a video conferencing and video in demand channel option to the user.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 21 www Garre t t C om c om .. Figure 4: A multicast traffic through a 6K32T Swi tches with Gigabit redundancy.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 22 www Garre t t C om c om .. 3.0 Installation Before installing the equipment, it is necessary to take the following precautions: 1.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 23 www Garre t t C om c om .. 3.2 Connecting Ethernet Media The Magnum 6K32T Switches are specifically designed to support all standard Ethernet media types within a single Switch unit.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 24 www Garre t t C om c om .. 3.2.2 Connecting Fiber Optic SC-type , "Snap-In" The following procedure applies to insta llations using a PM with SC-type fiber connectors, i.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 25 www Garre t t C om c om .. 3.2.5 Connecting Twisted P air (CAT-5e or be tte r , Unshielded or Shielded) The RJ-45 1000BASE.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 26 www Garre t t C om c om .. Fiber Port Module Speed, Std. Mode Std. km fdx (hdx) Wave - length nm Cable Size m X’mitr Output P T , dB R’cvr Sens.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 27 www Garre t t C om c om .. Magnum Fiber Switch GARRET Magnum PW Managed Switch Magnum 1 3 5 10/100 LK F/H AC 10/100 LK 2 4.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 28 www Garre t t C om c om .. D D C C BB A D D C C BB A A D D C C BB A A Standard Flush Mount Bracket Mid-Range Mount or Rear Mount Fig 3.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 29 www Garre t t C om c om .. 3.4 Powering the Magnum 6K32T Managed Switch The Magnum 6K32T Switches incorporate an internal universal power supply and have a recessed male IEC connector for the AC power cord at the left-rear.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 30 www Garre t t C om c om .. 4. By default it is NC (normally closed) 5. The software operation needs to be enabled and set to get the Alarm traps.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 31 www Garre t t C om c om .. Step 2. Remove Chassis Cover The Magnum 6K32T chassis are combined with top, bottom and front panel parts and assembled together with the he lp of 17 Philips-head screws.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 32 www Garre t t C om c om .. Looking down into the Magnum 6K32T unit, notice that there are individual PM installation spaces and female latch (white) connectors provided on the far right side of main board along with four stand-off’s for 6KPM card position.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 33 www Garre t t C om c om .. Step 2. Placed Granddaughter board (as shown in fig.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 34 www Garre t t C om c om .. Step 4. Hold the daughter board with both hands at the end and align the two cream color latching connectors (male) placed at the bottom of the daughter board with the other female connector placed on the Granddaughter and main board.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 35 www Garre t t C om c om .. Step 8. Once the 6KPM cards have been insta lled, the chassis top cover should be replaced by matching at the two front corners properly and slide in until it reaches the rear end and fit properly to match the holes.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 36 www Garre t t C om c om .. Step 3. Remove 6KPM Card Carefully and gently pull out the daughter boa rd from the latching connectors, using both hands, gripping the board near the latch-up c onnectors as shown in Fig.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 37 www Garre t t C om c om .. Pin 5 Pin 1 Note: For detail description of Managed Network Software (MNS-6K) and Magnum 6K32T Switch configuration for Network Management, ple a se re fe r to Magnum 6K32T Software Manual available on GarrettCom‘s F TP site.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 38 www Garre t t C om c om .. 6K32T, but local traffic on a port will not c onsume any of the bandwidth on any other port.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 39 www Garre t t C om c om .. 4.3 Up-link Cross-over Switch on RJ-45 port modules, for port#1 only The modular slot provided on Magnum 6K32T managed switch can be filled with 6KP8-RJ45 port module among all the mu ltiple choices of port m odules.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 40 www Garre t t C om c om .. negotiation ports typically will not work pr operly. The 6K32T Switch’s RJ-45 ports handle this situation by configuring the por ts as per desire through MNS software port settings and can check the port status of each port after the change.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 41 www Garre t t C om c om .. 4.5 Flow-control, IEEE 802.3x standard Magnum 6K32T Switches incorporate a flow-control mechanism for Full- Duplex mode.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 42 www Garre t t C om c om .. at a later date. In the event there are items missing or dam aged, contact your supplier. If you need to return the unit, use the original shipping container if possible.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 43 www Garre t t C om c om .. 6KP4-RJ10MST, 4 Port@ 10Mb ST Fiber Port 2 6 T LK RX ACT F/H TX RX LK ACT F/H TX RX LK ACT F/H .
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 44 www Garre t t C om c om .. 6KP4-RJ10MST, 4 Port@ 10Mb ST Fiber Port 2 6 T LK RX ACT F/H TX RX LK ACT F/H TX RX LK ACT F/H .
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 45 www Garre t t C om c om .. 5.2.2. 6KP6-RJMSC 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-SC “snap-in” Fiber connector.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 46 www Garre t t C om c om .. 10/100 LED indicates 100Mbps speed when lit and 10Mbps speed when off. To distinguish the single-mode 6 K6-RJSSC from the multi-mode 6K6-RJMSC, the label “Sgl.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 47 www Garre t t C om c om .. 5.2.5 6KP8-MTRJ, 8 @100Mb multi-mode FX , MTRJ Small-Form-factor Magnum 6KP8-MTRJ is a multi-mode fiber optic 8-port module equipped with a small-form-factor MTRJ-type connector.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 48 www Garre t t C om c om .. FULL/HALF 1 ACTI VIT Y LINK 2 3 3 2 1 8Por t@ 100Mbp s MLC Por ts - 2 4 6 8 LK LK LK LK ACT F/H.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 49 www Garre t t C om c om .. 5.2.8 6KP8-45LC, Combo 4@ 100Mbps multi-mode -L C small-form factor and 4@ 10/100 Mbps RJ-45 Connector The Magnum 6KP8- 45LC Module is a combo module with a combination of copper and Fiber (Small Form Factor) LC type ports.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 50 www Garre t t C om c om .. 4 3 2 4 6 LK 2 ACT F/H ACT F/H 6KP8V - 6KP8 -45-2MT 6 Port @ 10/10Mb p s and 2 port @100Mb Mult.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 51 www Garre t t C om c om .. 2SLC is equipped with 6 10/100 RJ-45 ports and 2 Single-mode fiber ports. When installed in a Magnum 6K32T Switch, it supports the standard distances as mentioned on 5.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 52 www Garre t t C om c om .. 1@ 1000Mb Fiber SC + 2@ 100Mb SC The two Giga port has been offered as GBPM -2OTX (fiber or RJ-45), whereas the single Gigabit module comes in flavor of G+4(10/ 100 RJ-45 ports) or G+2 (100Mb fiber ports) as shown below in the above figure.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 53 www Garre t t C om c om .. 5.2.12 6KM-BLNK The 6K8-BLNK is a blank face plate or cover plate that must be installed in any empty 6K32T PM slot to maintain proper cooling air flow, safety, etc.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 54 www Garre t t C om c om .. 5. Always check your Switch configurati on, specially Auto-negotiation behavior with other connected device to have proper setup tested.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 55 www Garre t t C om c om .. Product name Serial Number (or Invoice Number) Packing List Number (or Sales Order Number) Date of installation Failure sy mptoms, including a full description of the problem.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 56 www Garre t t C om c om .. than shipping and handling, provided that the product is returned pre-paid to GarrettCom.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 57 www Garre t t C om c om .. The manual power “On-Off” Switch (opti onal) is used for powering the unit on and off when it is placed into or taken out of service.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 58 www Garre t t C om c om .. lead from 48V or –48V supply must be connected to the post labeled “+”. An ON-OFF manual switch is optional for DC power. This can be used to cut off power connections and as a RESET for the Magnum 6K32T Switch.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 59 www Garre t t C om c om .. GND: Terminal for “earth” or ground wire connection to the hub chassis Input: Two separate .
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 60 www Garre t t C om c om .. reversed while the Switch is operating from the other source. e) The Switch will not receive pow er (and will not work) when both inputs are simultaneously absent or are both incorrectly connected.
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05) 61 www Garre t t C om c om .. C5.1 UL Requirements The following must be adhered to in or der to conform to UL requirements: 1. Minimum 18 AWG cable for connection to a Centralized DC power source.
An important point after buying a device GarrettCom Magnum 6K32T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GarrettCom Magnum 6K32T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GarrettCom Magnum 6K32T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GarrettCom Magnum 6K32T you will learn all the available features of the product, as well as information on its operation. The information that you get GarrettCom Magnum 6K32T will certainly help you make a decision on the purchase.
If you already are a holder of GarrettCom Magnum 6K32T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GarrettCom Magnum 6K32T.
However, one of the most important roles played by the user manual is to help in solving problems with GarrettCom Magnum 6K32T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GarrettCom Magnum 6K32T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center