Instruction/ maintenance manual of the product 84-00136 GarrettCom
Go to page of 73
i www Garre t t C om c om .. www Garre t t C om c om .. Corporate Headquarters GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539-7437 Phone (510) 438-9071 Fax (510) 438-9072 Website: http ://www.
Magnum 6K16-Series Managed Fiber Switch Installation & User Guide (04/06) i www Garre t t C om c om .. Magnum 6K16-Series Managed Fiber Switch Hardware Installation and User Guide Part #: 84-00136 (Rev.
Magnum 6K16-Series Managed Fiber Switch Installation & User Guide (04/06) ii www Garre t t C om c om .. Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Dr.
Magnum 6K16-Series Managed Fiber Switch Installation & User Guide (04/06) iii www Garre t t C om c om .. Table of Contents .............................................................................. Page 1.0 SPECIFICATIONS .....................
Magnum 6K16-Series Managed Fiber Switch Installation & User Guide (04/06) iv www Garre t t C om c om .. 4.0 OPERATION ....................................................................................... 40 4.1 Switching Func tionality .........
Magnum 6K16-Series Managed Fiber Switch Installation & User Guide (04/06) v www Garre t t C om c om .. Revisions 04/06: minor updates as PoE m odules option added on Sec 5.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide 04/06) www Garre t t C om c om .. THE MAGNUM LINE Ethernet connect ivity products "Designed and Manufactured i n the USA" Overview GARRETTCOM, INC.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide 04/06) www Garre t t C om c om .. 8 OR 9-PORT AND 4 OR 5-PORT PE RSONAL HUBS, W/ MAN. UP-LINK SW . MEDIA CONVERTERS, 10MB AND 100MB SERIES ALL MEDIA COMBINATIONS, INCL . FIBER ST, SC, MM.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 1 www Garre t t C om c om .. 1.0 SPECIFICATIONS 1.1 Technical Specifications Performance Filtering / Forwarding Rate: Ethern.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 2 www Garre t t C om c om .. Fiber Single-mode conn ector types: Fiber Port, SC-type: Fiber optic single-mode, 100BASE-FX Fi.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 3 www Garre t t C om c om .. For DC internal power supplie s at –48VDC, 24VDC and 125VDC, including Dual Source options ( for continuity of operation when either of the DC input sources are interrupted) , see Appendices B and C.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 4 www Garre t t C om c om .. 1.2 Ordering Information Magnum Managed Fiber Switch (16 ports max) MODEL DESCRIPTION Magnum 6K16V -Magnum 6K16V Managed Fiber Sw itch, base unit for vertical mounting.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 5 www Garre t t C om c om .. fiber ports connector GBPMV-2OTX Two-port Gigabit 6K module for 6K 16-Series Switches, provides.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 6 www Garre t t C om c om .. Gigabit (1000Mb) module option for Magnum 6K16V 6KP5-G4RJ “G+2” module, w/one GBIC transcei.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 7 www Garre t t C om c om .. 6K PoE Modules with 48VDC Pass-Through Configuration options: only one A, B or C module slot of.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 8 www Garre t t C om c om .. 2.0 Introduction 2.1 Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage that you believe occurred during shipment or delivery.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 9 www Garre t t C om c om .. 2.2 Product Description - M agnum 6K16-Series (6K16/6K16V) M agnum 6K16-Series Managed Swit.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 10 www Garre t t C om c om .. Security with control via Web and command line interface (CLI). For high availability LANs using ring topologies, Spanning Tree Protocol, Link-Loss-Learn and S-Ring are available.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 11 www Garre t t C om c om .. choice of popular DC options or industry standard AC internal input.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 12 www Garre t t C om c om .. requirement of this space. Magnum 6K mana gement features not only allow the easy monitoring of the switch through SNMP, but also protect the network through its security features of port-security, SNMP3, VLAN et c.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 13 www Garre t t C om c om .. Media Copper & Fiber Same Port Module can be 10,100 or 1000Mb Same Suitable for Applic ati.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 14 www Garre t t C om c om .. HDX type of Fast Et hernet devices). There are three LED’s per fiber port.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 15 www Garre t t C om c om .. or 100Mb speed and full- or half-duplex m ode per-port as per user requirement.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 16 www Garre t t C om c om .. The four RJ-45 ports operate just like the 8-port copper module with auto-cross (MDIX) feature to eliminate the us e of cro ss-over cable, and the two fiber ports operate at 100Mbps full-duplex (default) .
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 17 www Garre t t C om c om .. 2.2.7 Gigabit (1000Mbps) port modules The Magnum 6K16-Series offered a wide option Gigabit speed with multiple choice for the modular slot. While up to two Gigabit modules (maxm.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 18 www Garre t t C om c om .. standard and fulfills its role in support of QOS, giving packet processing priority to priority tagged packets according to the 802.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 19 www Garre t t C om c om .. 2.2.10 Managed Network Software ( MNS-6K ) for Magnum 6K8-Series Magnum 6K8-Series’s come with license d MNS-6K Firmware (Rel 3.2), which allows to configure the Magnum 6Ks as a Managed Switch and othe r Software enabled features.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 20 www Garre t t C om c om .. 2.3 Features and Benefits Managed switching for high performance Ethernet LANs Magnum 6K16.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 21 www Garre t t C om c om .. 2.4 Applications Magnum 6K16-Series Fiber Switches o ffer high performance, modularity and availability.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 22 www Garre t t C om c om .. The option for setting the ports at 10 or 100Mb on copper, and supporting the 10 or 100Mb fiber media, provide a very wide spread option to the users to mix match their legacy and advance network needs.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 23 www Garre t t C om c om .. running in mili-seconds . The ring topology of the network consists of high speed LAN segments supported by 100Mbps full-duplex future-proof fiber media to provide secure long distance LAN connection.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 24 www Garre t t C om c om .. Example 3. In another application, in a Telco environment, 12 port Nebs compliant, -48VDC operated m anaged switch is required to meet the fiber and copper connection to store the sensitive da tas.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 25 www Garre t t C om c om .. 3.0 Installation Before installing the equipment, it is necessary to take the following precautions: 1.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 26 www Garre t t C om c om .. IEEE Standard Media Type Max. Dis tance Port Modu le Fiber: 100BASE-FX m m 1 Fiber 220m ( ft) GBIC-SXSC sgl.m 2 Fiber 5Km GBIC-LXSC 100BASE-FX m m 1 Fiber 2.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 27 www Garre t t C om c om .. (9/125 microns for single-mode, 50/125 or 62.5/125 microns for multi-mode where xx/xx are the diameters of the core and the core plus the cladding respectively).
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 28 www Garre t t C om c om .. NOTE : It is recommended that high quality CAT. 5E cables (which work for both 100 Mb and 1000Mb) be used whenever possible in order to provide flexibility in a mixed-speed network.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 29 www Garre t t C om c om .. the top when the 6K16V is installed on a DIN Rail. To install the 6K16V with the DIN-Rail brackets and latches attached to it, hold the 6K16V in the vertical position with the bo ttom out, and with the top moved in toward the DIN-Rail.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 30 www Garre t t C om c om .. The DIN-Rail mounting brackets and latches are optional and need to be ordered as separate items, e.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 31 www Garre t t C om c om .. 3.3.2 Rack-mounting options (Magnum 6K16) for Telco and ET SI Standard Magnum 6K16, a carrier .
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 32 www Garre t t C om c om .. 3.4 Powering the Magnum 6K16- Series Managed Fiber Switch The Magnum 6K16-Series Switches incor porate an internal universal power supply and have a recessed male IEC connector for the AC power cord at the left-rear.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 33 www Garre t t C om c om .. failure of the power supply inside of th e Magnum 6K16 Switch. Useful info. about Alarm contacts: 1. There is four terminal block (1,2,3 ,4)provided next to AC/DC power supply 2.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 34 www Garre t t C om c om .. contains (Daughterboard (Bigger) and Gr anddaughter board (smaller), three 5/8 stand offs for Granddaughter board, 6 st andoff for daughter Board, nine #4-40 Pan-Head screws along with Front pane l face plate package.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 35 www Garre t t C om c om .. When the chassis top cover has been re m oved, the interior of the unit is exposed.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 36 www Garre t t C om c om .. screw down tightly with the three 5/16 stand-off (male) on the top of the Granddaughter board The 5/16 stand off has been used to place the daughter board on the top of the granddaughter board and latch it securely.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 37 www Garre t t C om c om .. Step 5. Once the latching connectors are aligned properly and the mounting holes are aligned with stand offs then press slowly and firmly with two fingers (as shown below in Fig.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 38 www Garre t t C om c om .. installed inside of the top cover. Step 8. Once all 6KP M cards have been installed (including faceplates for empty slots), the chassis cover should be repl aced.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 39 www Garre t t C om c om .. 3.7 Connecting a Management Console Terminal to Magnum 6K16- Series Use a DB-9 “null modem.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 40 www Garre t t C om c om .. 4.0 OPERATION This chapter describes the functions and operation of the Magnum 6K16-Series Switch. 4.1 Switching Functionality A Magnum 6K16-Series provides switched c onnectivity at Ethernet wire-speed among all of its ports.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 41 www Garre t t C om c om .. 4.2 Status LEDs For Magnum 6K16-Series models (6K16/6K16V) : PWR : Power LED, O N when external power is applied to the unit. LK : Steady ON, Link status for 10 Mbps and 100Mbps operation.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 42 www Garre t t C om c om .. 6K16-Series Switch’s RJ-45 ports handle this situation by configuring the ports as per desire through MNS software port settings a nd can check the port status of each port after the change.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 43 www Garre t t C om c om .. 4.5 Flow-control, IEEE 802.3x standard Magnum 6K16-Series Switches incorpor ate a flow-control mechanism for Full-Duplex mode.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 44 www Garre t t C om c om .. The following data has been collected from component manufacturer’s (Agilent’s and Lucent’) web sites and catalogs to provide gui dance to network designers and installers.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 45 www Garre t t C om c om .. 5.0 Introduction - Magnum 6K16/6K 16V Managed Fiber Switch Port Modules This chapter describes each Port Module (PM), including appearance, functionality, and status displays.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 46 www Garre t t C om c om .. 5.2.1 6KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-ST “twist lock” Combo Module The Magnum 6KP6-RJMST is a co mbo 6 port module of RJ-45’s at 10/100Mbps and fiber optic ports at 100MB.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 47 www Garre t t C om c om .. 6KP4-RJ10MST, 4 Port@ 10Mb ST Fiber Port 2 6 T LK RX ACT F/H TX RX LK ACT F/H TX RX LK ACT F/H.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 48 www Garre t t C om c om .. network to the Magnum 6K16-Seri es switch. They also provide a convenient way for the half duplex hub to connect to the switch through 10Mb fiber ports.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 49 www Garre t t C om c om .. module of the 6K16-Series Switch supporting four Copper and two single-mode fiber network segments. The 6KP6-RJSSC, when installed in a Magnum 6K16-Series Switch operates on copper at the 100m distance.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 50 www Garre t t C om c om .. to connect the legacy network of 10Mb requirement in the network.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 51 www Garre t t C om c om .. i.e., typically 2km at full-duplex and 412m at half-duplex. The 10Mb Multi-mode ST- Fiber connector supports the standard fiber optic distance limit of 2Km at Full and Half- duplex both.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 52 www Garre t t C om c om .. one housing that cannot be improperly insert ed.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 53 www Garre t t C om c om .. shielded twisted pair (STP) cable connections. The 6KP8-R J45 module is equipped with a Media Dependent Auto-Crossover (MDI-X) switch, which controls all ports for cascaded connection.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 54 www Garre t t C om c om .. 4 3 2 4 6 LK 2 ACT F/H ACT F/H 6KP8V - 6KP8-45-2MT 6 Port @ 10/10Mb p s & 2 port @100Mb Multi -Mode Fiber port 1 3 5 10/10 L 1 F/H AC 4 FULL/HALF 1 ACTIVITY LINK 2 3 10/100 10/100 F/H port.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 55 www Garre t t C om c om .. When installed in a Magnum 6K16-Series Switc h, it supports the standard distances as mentioned on 5.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 56 www Garre t t C om c om .. 1@ 1000Mb Fiber SC + 2@ 100Mb SC The two Giga port has been offered as GBPM -2OTX (fiber or RJ-45), whereas the single Gigabit module comes in flavor of G+4(10/ 100 RJ-45 ports) or G+2 (100Mb fiber ports) as shown below in the above figure.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 57 www Garre t t C om c om .. 6.0 TROUBLESHOOTING All Magnum Ethernet products are designed to provide reliability and consistently high performance in all network environments .
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 58 www Garre t t C om c om .. 6.2 When Calling for Assistance Please be prepared to provide the following information. 1. A complete description of the problem, including the following points: a.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 59 www Garre t t C om c om .. GarrettCom will carefully test and evaluate all returned products, will repair products that a.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 60 www Garre t t C om c om .. B1.0 SPECIFICATIONS FOR MAG NUM 6K16-SERIES SWITCHES, DC POWER Magnum 6K16-Series models, for .
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 61 www Garre t t C om c om .. incorrect polarity connection, for example, w ill neither affect the Switch, its internal power supply, nor will it blow the fuse in the internal power supply.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 62 www Garre t t C om c om .. Note: The GND should be hooked up first. Th e 6K16-Series unit has a floating ground, so the user may elect to G round either + or = terminal to s uit the customer’s use.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 63 www Garre t t C om c om .. Power Supply (Internal, -48VDC Dual -Source, model # Dual-Src-48V) DC Power Connector: First S.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 64 www Garre t t C om c om .. its power from the DC source with the highest voltage at a given tim e. b) The Switch unit will not allow power to flow from a higher voltage input to a lower voltage input, i.
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 65 www Garre t t C om c om .. C5.1 UL Requirements The following must be adhered to in or der to conform to UL requirements: 1. Minimum 18 AWG cable for connecti on to a Centralized DC power source.
An important point after buying a device GarrettCom 84-00136 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GarrettCom 84-00136 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GarrettCom 84-00136 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GarrettCom 84-00136 you will learn all the available features of the product, as well as information on its operation. The information that you get GarrettCom 84-00136 will certainly help you make a decision on the purchase.
If you already are a holder of GarrettCom 84-00136, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GarrettCom 84-00136.
However, one of the most important roles played by the user manual is to help in solving problems with GarrettCom 84-00136. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GarrettCom 84-00136 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
