Instruction/ maintenance manual of the product GSD22 Garmin
Go to page of 10
GSD 22 Sounder Module installation instructions.
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded, or stored in any storage medium, for any purpose without the express prior written consent of Garmin.
1 GSD 22 Sonar Module I NTRODUCTION Thank you for choosing the Garmin GSD 22 Sounder Module. The GSD 22 is a CANet TM and Garmin Marine Network compatible, remote sounder module designed to include powerful features found in other Garmin sounders, including Color Depth Control Gain (DCG ® ), Dynacolor TM , and auto gain features technology .
2 GSD 22 Sonar Module I NST ALLA TION I NSTRUCTIONS I NST ALLA TION I NSTRUCTIONS The GSD 22 must be properly installed according to the following CANet or Marine Network installation instructions to get the best possible performance. Refer to your chartplotter to determine the correct installation method.
3 GSD 22 Sonar Module I NST ALLA TION I NSTRUCTIONS CANet Wiring for the Garmin GSD 22 Notes: 1. Power and ground wires require 18 A WG. Y ou can extend the CANet wiring of the GSD 22 power/data cable up to 80 ft (24.38 m) total length using the CANet Connections Kit.
4 GSD 22 Sonar Module I NST ALLA TION I NSTRUCTIONS Marine Network Wiring and Cables Garmin Marine Network components use specialized Garmin Network cables. For some installations, it may be necessary to drill 1.25" (31.7 mm) holes to route the connector end of the cables.
5 GSD 22 Sonar Module I NST ALLA TION I NSTRUCTIONS The following diagrams shows the Garmin Marine Network with a GSD 22 Sounder Module connected. G A R MI N GD L 3 0/ 3 0 A M A R IN E WE A T H E R/ A.
6 GSD 22 Sonar Module I NST ALLA TION I NSTRUCTIONS Blink Codes When the unit is installed, it switches on when the display unit is powered on (or the GSD 22 remote power line is pulled low , with power applied). The two-color (Green/Red) LED on the GSD 22 indicates the current operational status of the module.
7 GSD 22 Sonar Module I NST ALLA TION I NSTRUCTIONS S PECIFICA TIONS Physical Size: 7.60" L x 6.10" W x 3.00" H (19.3 cm x 5.5 cm x 7.6 cm) W eight: 2.
For the latest fr ee software updates (excluding map data) throughout the life of your Garmin products , visit the Garmin W eb site at www .garmin.com. © 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
An important point after buying a device Garmin GSD22 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin GSD22 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin GSD22 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin GSD22 you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin GSD22 will certainly help you make a decision on the purchase.
If you already are a holder of Garmin GSD22, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin GSD22.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin GSD22. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin GSD22 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
