Instruction/ maintenance manual of the product GPS 17 Garmin
Go to page of 16
GPSMAP ® 2106/2110 & GPS 17 installation instructions Graphic to be replaced.
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded, or stored in any storage medium, for any purpose without the express prior written consent of Garmin.
1 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 I NTRODUCTION The GPSMAP 2106/21 10 Multi-Function Display (MFD) and GPS 17 must be properly installed according to the following instructions for the best possible performance. T o complete the installation, you need the appropriate fasteners, tools, and mounts listed in each section.
2 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 Bail Mount Bail mount Mounting knobs I NST ALLA TION I NSTRUCTIONS Surface Mounting the GPSMAP 2106/21 10 T ools • Drill and drill bit • Screwdriver • Pencil • Mounting hardware (not included) NOTE: Mounting hardware (fasteners) not included.
3 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 230mm 208mm .
4 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 Installing the GPS 17 Y ou can install flush mount or install the GPS 17 on any standard 1" O.D. (Outer Dimension), 14 threads-per-inch marine mount. When mounting the GPS 17, the cable can be run externally , through the mounting panel, or through the center of the marine mount.
5 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 T o attach the enclosed pole mount to the GPS 17: 1. Thread the cable though the pole mount. 2. Align the tab on the mount to the notch on the GPS 17. 3. Use the enclosed screws to secure the mount to the base.
6 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 Wiring and Cables The GPSMAP 2106/21 10 comes with an 18-pin Power/Data cable. For some installations, it may be necessary to drill 1.25" (31.7 mm) holes to route the connector end of the cables.
7 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 CANet Wiring for the GPSMAP 2106/21 10 CANet ® is a high-speed sonar network. Using the CANet interface optimizes the performance of the CANet-compatible units. CANet compatible unit device features, such as Ultrascroll™, are affected if a serial interface is used.
8 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 Power/Data Cable Wiring The following pages contain several wiring diagrams. The first diagram on the next page is a simple diagram showing the GPSMAP 2106/21 10 MFD using the 18-pin Power/Data wiring harness and the GPS 17.
9 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 GPSMAP 2106/21 10 and GPS 17 Basic Wiring W IR E C OL O R G P S 17 G P S / W A A S S EN SO R B LA C K (G RO U N D) Y EL L OW ( ON ) R ED .
10 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 G A R MI N G P S MA P 2 10 6/ 21 10 G P S 1 7 G A R MI N G P S MA P 2 10 6/ 21 10 Optional Alarm Wiring The GPSMAP 2106/21 10 has an alarm circuit that can be used with a lamp, a horn, or both to alert you when the unit displays a message.
1 1 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 Final Wiring Connection After all the wiring is complete, plug the 18-pin harness into the center connector on the backside of the GPSMAP 2106/21 10. The 5-pin port on the right side is intended for future interfacing features and does not require connection at this time.
12 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17.
13 I NST ALLA TION I NSTRUCTIONS GPSMAP 2106/21 10 & GPS 17 Flush Mount Drilling T emplate Drill this 3/4" (19 mm) hole if the coax is going to be installed through the mounting panel Drill using a 1 1/64" (4.
© Copyright 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey , SO51 9DL, U.K. Garmin Corporation No.
An important point after buying a device Garmin GPS 17 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin GPS 17 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin GPS 17 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin GPS 17 you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin GPS 17 will certainly help you make a decision on the purchase.
If you already are a holder of Garmin GPS 17, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin GPS 17.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin GPS 17. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin GPS 17 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
