Instruction/ maintenance manual of the product GMR 190-00669-02 Garmin
Go to page of 17
GMR 404/406 marine radar installation instructions.
© 2006–2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, USA T el. (913) 397.8200 or (800) 800.1020 Fax (913) 397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Ind ustria l Est ate, Rom sey , SO51 9LR, U K T el .
GMR 404/406 Marine Radar Installation Instructions 1 W elcome Thank you for choosing the Garmin GMR 404/406. These instructions help you assemble and install the GMR 404/406 radar . T o install your Garmin chartplotter , consult the installation instructions packaged with the chartplotter .
2 I nst alla tIon Installing the Scanner The following section covers the assembly and installation of the GMR 404 or GMR 406 marine radar . The GMR 404 and 406 only operate with components of the Garmin Marine Network, and MFDs (multifunction displays).
GMR 404/406 Marine Radar Installation Instructions 3 Step Install the Mounting Studs and Seals: 1. Remove the hatch on the front of pedestal by loosening the screw and lifting the hatch off of the hinges as shown in Figure 1.
4 GMR 404/406 Marine Radar Installation Instructions Step Mount the Antenna: 1. Remove the protective cover from the pedestal wave guide. 2. V erify that the antenna wave guide is aligned with the pedestal wave guide and slide the antenna onto the pedestal.
GMR 404/406 Marine Radar Installation Instructions 5 Figure 9 Figure 10 Figure 8 Step Install the Cable Assembly Route the cable as needed, depending on the type of mount you are using. DO NOT cut the cable! It m ay be necessary to drill a 31.7 mm (1.
6 GMR 404/406 Marine Radar Installation Instructions Step Connecting the scanner Connect the scanner power cable (Red and Black) to V oltage Converter output cab le (Red and Black) using the supplied heat-shrink crimp connectors. DO NOT cut the scanner cable and DO NOT remove the in-line fuse located on the scanner power cable.
GMR 404/406 Marine Radar Installation Instructions 7 Step Connection the network: For a stand-alone network (chartplotter and radar only), attach the RJ-45 marine network cable to the RJ-45 socket on the back of the chartplotter .
8 GMR 404/406 Marine Radar Installation Instructions Radar Setup T o take advantage of the GMR 404/406 features, the Garmin Marine Network may require a software update. A software update card is provided in the Marine Data Management Kit. The newly installed GMR 404 or 406 will not transmit until the radar is properly congured.
GMR 404/406 Marine Radar Installation Instructions 9 Specications 4 ft Open-Array Antenna: T ype: End fed slotted waveguide Horizontal Beamwidth: 1.
10 GMR 404/406 Marine Radar Installation Instructions Antenna Rotation: 24 rpm and 48 rpm Maximum wind load: 100 kts Receiver Noise Figure: Less than 4 dB Environmental: T emp: 14 to 140º F (-10 to +60º C) Humidity: 95% @ 95 ºF (35 ºC) Rel W ind: 100 kts W aterproof to IEC 60529 IPX6 Range: 65.
GMR 404/406 Marine Radar Installation Instructions 1 1 5.91″ 5.51″ 7.87″ 7.87″ L 12.87″ 326.8 mm 12.34″ 17.35″ Model L GMR 404 51.6" [1310 mm] GMR 406 75.
12 GMR 404/406 Marine Radar Installation Instructions Failure to avoid the following potentially hazardous situations could r esult in an accident or collision resulting in death or serious injury .
GMR 404/406 Marine Radar Installation Instructions 13 Software License Agreement BY USING THE GMR 404/406 , YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTW ARE LICENSE AGREEMENT .
.
F or the latest free software updates (excluding map data) thr oughout the life of your Garmin products, visit the Garmin W eb site at www .garmin.com. © 2006–2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe , K ansas 66062, USA Garmin (Europe) Ltd.
An important point after buying a device Garmin GMR 190-00669-02 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin GMR 190-00669-02 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin GMR 190-00669-02 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin GMR 190-00669-02 you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin GMR 190-00669-02 will certainly help you make a decision on the purchase.
If you already are a holder of Garmin GMR 190-00669-02, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin GMR 190-00669-02.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin GMR 190-00669-02. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin GMR 190-00669-02 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
