Instruction/ maintenance manual of the product 670 Garmin
Go to page of 24
Garmin fleet ™ 670/670V Owner’s Manual July 2015 Printed in Taiwan 190-01792-00_0B.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Table of Contents Getting Started ............................................................... 1 Connecting the Device to Vehicle Power ................................... 1 Support and Updates ......................................................
Deleting a Paired Phone ...................................................... 11 Placing a Call ............................................................................ 11 Dialing a Number .........................................................
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information.
Adding Shortcuts and Widgets to the Home Screen You can add application shortcuts and widgets to any of the home screen pages. Widgets are tools that provide quick access to information, basic application functions, or device settings. 1 From the home screen, swipe left or right to select a home screen page.
Finding an Address NOTE: The order of the steps may change depending on the map data loaded on your device. 1 Select Where To? . 2 If necessary, select Searching near: to change the search area ( Changing the Search Area , page 2 ). 3 Select Address .
Deleting a Saved Location NOTE: Deleted locations cannot be recovered. 1 Select Where To? > Saved . 2 Select > Delete Saved Places . 3 Select the box next to the saved locations to delete, and select Delete . Setting a Simulated Location If you are indoors or not receiving satellite signals, you can use the GPS to set a simulated location.
Adding a Point to a Route Before you can add a point, you must be navigating a route. 1 From the map, select > Where To? . 2 Search for a location. 3 Select a location.
Banks and ATMs Weigh stations Finding Upcoming Points of Interest 1 From the map, select > Up Ahead . 2 Select a tab. 3 Select a point of interest. Customizing the Up Ahead Categories You can change the categories you search for, rearrange the order of the categories, and search for a specific business or category.
6 Select Done . Avoiding a Road 1 Select Settings > Navigation > Custom Avoidances . 2 Select Add Avoid Road . 3 Select the starting point of the section of road to avoid, and select Next . 4 Select the ending point of the road section, and select Next .
Viewing Traffic on the Map The traffic map shows color-coded traffic flow and delays on nearby roads. 1 From the main menu, select > Traffic . 2 If necessary, select > Legend to view the legend for the traffic map. Searching for Traffic Incidents 1 From the main menu, select > Traffic .
5 Select an option: • Select > Delete , and select the check box to delete a report. • Select > Combine , and select the check boxes to combine reports. • Select > Export > OK . The device exports the report to a .csv file and stores it in the Reports folder on the device.
4 If necessary, enter your tractor number, tractor VIN, and trailer number. 5 If necessary, select a log to export. 6 If necessary, select the location to which the log should be exported. The device exports the log to a .csv file and stores it in the Reports folder in the device memory.
• You might need to set your phone to connect to the device automatically when the device is turned on. Disconnecting a Bluetooth Device You can temporarily disconnect a Bluetooth device without deleting it from the paired devices list. The Bluetooth device can still connect to your Garmin fleet device automatically in the future.
Viewing ecoChallenge Scores Select > ecoRoute™ > ecoChallenge . About the ecoChallenge Score Acceleration : Displays your score for smooth and gradual acceleration. You lose points for rapid acceleration. Braking : Displays your score for smooth and gradual braking.
About Memory Cards You can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping software ( www.garmin.com ). In addition to map and data storage, the memory card can be used to store files such as maps, images, geocaches, routes, waypoints, and custom POIs.
GPS Simulator : Stops the device from receiving a GPS signal, and saves battery power. Calculation Mode Settings Select Settings > Navigation > Calculation Mode . The route calculation is based on road speeds and vehicle acceleration data for a given route.
Resetting to Factory Default Values Before you reset the device to its factory default values, you should back up all user data. This enables you to retrieve important data, if necessary. NOTICE Data deleted through a factory reset cannot be restored from the internal storage.
3 If using a dampened cloth, turn off the device and disconnect the device from power. 4 Gently wipe the screen with the cloth. Avoiding Theft • Remove the device and mount from sight when not in use. • Remove the residue left on the windshield by the suction cup.
Index Symbols 2-D map view 7 3-D map view 7 A accessories 16 accounts 14 active lane guidance 5 addresses, finding 3 answering calls 11 audio, proximity points 14 avoidances ar.
proximity points alerts, settings 14 R recently found locations 3 registering the device 1 regulations, hours of service 9 removing mount 16 renaming trips 12 reports mileage 12 .
.
www.garmin.com/support +43 (0) 820 220230 + 32 2 672 52 54 0800 770 4960 1-866-429-9296 +385 1 5508 272 +385 1 5508 271 +420 221 985466 +420 221 985465 + 45 4810 5050 + 358 9 6937 9758 + 331 55 69 33 .
An important point after buying a device Garmin 670 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin 670 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin 670 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin 670 you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin 670 will certainly help you make a decision on the purchase.
If you already are a holder of Garmin 670, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin 670.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin 670. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin 670 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
