Instruction/ maintenance manual of the product 250C Garmin
Go to page of 40
Fishfi nder 250/250C high-resolution sonar owner’ s manual (Fishfi nder 250C shown) 250C Cover.indd 1 1/27/2004, 2:37:44 PM.
© Copyright 2004 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, KS 66062, U.S.A. T el. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey SO51 9DL, U.
i Introduction Preface and Registration Preface Thank you for choosing the Garmin Fishfi nder 250/250C. This product is designed for easy operation and to provide years of r eliable service. Operations for the Fishfi nder 250 and Fishfi nder 250C are the same unless othewise noted.
ii Introduction W arranty and Serial Number The Fishfi nder 250/250C is fastened shut with scr ews. Any attempt to open the case to change or modify the unit in any way will void your warranty and may r esult in per manent damage to the equipment.
iii Introduction , Software License Agreement Software License Agreement BY USING THE FISHFINDER 250/250C, YOU AGREE TO BE BOUND BY THE TERMS AND CONDI- TIONS OF THE FOLLOWING SOFTW ARE LICENSE AGREEMENT .
For the most recent list of available accessories for your unit, current user manuals and software updates, visit our web site at www .gar min.com. iv P acking List Introduction Before installing and getting started with your unit, please check to see that your package includes the following items.
v Selecting a T ransducer Introduction T ransducers The transducer acts as the eyes and ears of your sonar , transmitting sound waves toward the bottom in a cone shape. Proper transducer selection and installation ar e important to the operation of your unit.
vi Introduction T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . i-vi Preface and Registration . . . . . . . . . . . . . . . . . . i W arranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Software License Agreement .
1 Installation Installing the Fishfi nder 250/250C The Fishfi nder 250/250C must be properly installed accor ding to the following instructions to get the best possible performance. T o complete the installation, you’ll need the appropriate fasteners and tools.
2 T o swivel mount the Fishfi nder 250/250C display: T ools (not included) — Drill, Screwdriver (Phillips or Standard), three #8 (4mm) pan head machine bolts with matching nuts and washers and a 5/32” (5mm) drill bit, OR three #8 pan head self-tapping screws and an appropriately-sized drill bit for drilling starter holes .
3 Installation Unit Installation Installing the Unit on the Mounting Bracket 1. Align the slot on the back of the unit with the long mounting knob and slide in place . It may be neces- sary to adjust the long mounting knob to spread the brack et arms apart.
4 Installation Flush Mounting the Fishfi nder 250/250C Unit The Fishfi nder 250/250C can be fl ush mounted on a fl at panel. When fl ush mounting the Fishfi nder 250/250C, be sure to choose an appr opriately sized location for the unit. Check that all cables reach the unit mounting location before beginning installation.
5 T o 10-35 V olt Boat Supply 2A - + Boat Ground Black Wire Red Wire Install 2-Amp Fuse T o Fishfi nder 250/250C Installation Connecting the Power/Data Cable The power/data cable connects the Fishfi nder 250/250C to a 10-35 volt DC system and provides interface capabilities for connecting external devices.
6 Interfacing The Fishfi nder 250/250C allows for NMEA 0183, V ersion 2.3 input/output with a compatible GPS or navigation device. NMEA Input/Output must be set to ‘On’ to send/receive data (see pg. 20). For additional information on using your Fishfi nder 250/250C with NMEA devices, see pages 5, 15, and 20.
7 Do not mount transducer directly in the path of the prop. The tr ansducer can cause cavitation that ma y degrade the boat's performance and damage the prop. Make sure that the transducer is below water le vel when the boat is on plane at high speed Apply marine sealant to all screw threads to pre vent w ater from seeping into the transom.
8 Installation T esting the Location Strip Caulk or R TV Sealer Hull Surface PVC Pipe or a Can W eight transducer to hold it in place Fill Pipe or Can with water or a light mineral oil Mounting the T .
9 T esting the Installation While it is possible to perform some checks with the boat trailered, the boat should be in the water to properly test the sonar portion of the installation. Press the POWER/BACKLIGHT key (see pg. 10) and the Fishfi nder 250/250C should power on.
10 Using the Keypad The keypad contains the following keys: ARROW Keys— used to select (highlight) menu options and enter data. Also control movement of the cursor when paused in Pointer mode. Allow direct contr ol of Sonar Page Adjustments. ENTER Key— selects a highlighted menu option.
11 Unit Operation Understanding the Display Sonar Page The Sonar Page is where your Fishfi nder 250/250C becomes a powerful fi shfi nder/fl asher . If the unit does not detect a transducer , a “Sonar T urned Off” message is displayed on the Sonar Page.
12 Using the Adjustment Menu The Adjustment Menu allows direct access to the settings and features most commonly used on the Sonar Page. There are 10 main adjustment options available: Range, Zoom, V iew , Gain, T arget Level, Whiteline, Frequency , Depth Line, Noise Reject, and Scroll.
13 The Zoom function has seven settings: No Zoom –– Displays the sonar picture with no zoom. 2x Split –– Shows two reduced-size sonar pictures at the same time. The right half of the display screen shows the complete sonar picture at its original scale.
14 • Whiteline — controls how the unit displays information about the bottom type (har d or soft). With the Whiteline ‘Off ’, all high-intensity bottom returns are displayed as red on the Fishfi nder 250C and black on the Fishfi nder 250.
15 Pausing the Sonar P age Y ou may pause the Sonar Page to stop it fr om scrolling. The paused screen allows you to take a better look at sonar returns. When in this mode, the word “Paused” is displayed at the bottom of the scr een and a Pointer cursor is activated.
16 Main Menu The Main Menu contains the unit settings that usually do not require fr equent change. The Main Menu is divided into eight tabs: Graph, T ools, T emp, Alarms, System, Units, Sonar and Time. Each tab is described in more detail in this section.
17 • Background Color (Fishfi nder 250C only) — allows you to change the background color of the sonar display . Choices are Black, Blue or White. • Number Size — allows you to choose between a Normal or Large sized Basic depth/temp/speed display .
18 T o toggle the data fi eld display: 1. Use the ARROW k eys to highlight the ‘ Advanced Data Fields’ fi eld and press ENTER . 2. Select ‘On’ or ‘Off’ and press ENTER . T o access the Advanced data setup: 1. Use the ARROW k eys to highlight ‘Confi gure Advanced Data Fields’ and press ENTER .
19 Alarms T ab Contains settings for the unit’ s alarms. (For a list of alarms and unit messages, see page 28.) The Alarms T ab is divided into two submenu tabs: Sonar alarms and System alarms. Sonar alarms: • Fish — sets alarm/icon to sound/display when unit detects a fi sh of the specifi ed symbol size.
20 System T ab Controls various system and interface settings. The following settings ar e available: • Beeper — controls audible beep. Select from ‘Of f ’, ‘Alarms Only’ (sounds for alarms/messages), or ‘Key and Alarm’ (sounds for key presses and alarms/messages).
21 • Heading — select the reference used in calculating heading information for the the following Advanced data fi elds: Bearing, Compass, Course, and T rack (see pg.
22 accurate) or a stopwatch to determine your speed over a certain distance (distance / time = speed). It is recommended that the calibration take place in water having little or no current. T o calibrate the water speed: 1. Use the ARROW k eys to highlight ‘ Calibrate W ater Speed’ and press ENTER .
23 Understanding Sonar If you are unfamiliar with basic sonar , or need help determining what is displayed on the graph, this section may be for you. This section is intended to help the novice user gain some understanding of how the Fishfi nder 250/250C operates and how it can help improve their fi shing productivity .
24 On the W ater T ransducer Cover age The area covered by the transmitted sound waves is determined by the cone angle of the transducer and the water depth.
25 Understanding the Gr aph It is important to understand that the unit does not display a 3-D representation of the underwater environment. The unit can display multiple items at the same time, but cannot determine wher e each return originated – only when it was received.
26 Whiteline The Fishfi nder 250/250C can help you to determine if the bottom is hard or soft. When the sonar soundwaves are refl ected back by the bottom, a hard bottom returns a stronger signal than a soft bottom. A thin whiteline indicates a softer bottom while a thick whiteline indicates a harder bottom.
27 Physical Specifi cations Size: 6.1" W x 4.9" H x 2.9" D (15.5 cm x 12.5 cm x 7.4 cm) W eight: 1.1 lbs. (0.5 kg) Display: (Fishfi nder 250) 4.5" diagonal (11.4 cm), 3.2” W x 32” H (8.1 cm x 8.1 cm) high-contrast 10-level grayscale FSTN display with adjustable brightness (320 x 320 pixels) (Fishfi nder 250C) 4.
28 Appendix B Messages and Alarms Battery Alarm — Batter y voltage has fallen below the value entered in the Battery Alarm setup. Battery V oltage High— Input voltage too high, unit will shut off.
29 Appendix C Index A Accessories iv-v ADJ/MENU Key 10 Adjustment Menu 12 Adjustment Menu Options 12 Advanced Data Fields 17 Advanced Display 17 Alarms 19, 28 Alarms T ab 19 ARROW Keys 10 Automatic Sc.
30 Appendix C Index P Packing List iv Pointer 10, 12, 15 Position Format 20 POWER/BACKLIGHT key 9-10 Power Up 9 Preface i R Range 12 Registration i Reset Odometer 20 Reset Scale 18 S Scale 16 Scroll 1.
250C Cover.indd 3 1/27/2004, 2:38:34 PM.
© Copyright 2004 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey , SO51 9DL, U.K. Garmin Corporation No.
An important point after buying a device Garmin 250C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin 250C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin 250C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin 250C you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin 250C will certainly help you make a decision on the purchase.
If you already are a holder of Garmin 250C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin 250C.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin 250C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin 250C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
