Instruction/ maintenance manual of the product 140 Garmin
Go to page of 3
Mounting Hardware: A—Foam rubber pads (4) B—M4 x 40 mm hex head screws (4) C—M4 hex nuts (4) D—Reusable cable tie (1) E—Metal retaining brackets (2) Read these instructions thoroughly , and make sure you completely understand them before you attempt installation.
Installing or Removing the Fishfinder 1. Connect the wiring harness to the back of the Fishfinder . Make sure the locking ring is fully tightened. 2. Slide the Fishfinder into the pocket (Figure 3). It might be necessary to apply some pressure when inserting the assembly into the pocket to compress the foam rubber pads.
Fishfinder 140 Flush Mount T emplate Garmin Ltd.
An important point after buying a device Garmin 140 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin 140 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin 140 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin 140 you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin 140 will certainly help you make a decision on the purchase.
If you already are a holder of Garmin 140, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin 140.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin 140. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin 140 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
