Instruction/ maintenance manual of the product VM2143VS Altinex
Go to page of 12
V-MATRIX MANUAL PART NUMBER: 400-0172-003 8-IN VIDEO/SYNC INPUT CARD FOR V-MATRIX ™ WITH COVER PLATE USER’S GUIDE VM2143VS.
V-MATRIX 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 1.1 GENERAL ................................ ................. 2 1.2 INSTALLATION ................................ ......... 2 1.3 CLEANING ..............................
V-MATRIX 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your VM2143VS . Keep this manual handy for future reference. These safety instructions are to ensure the long life of your VM2143VS and to prevent fire and shock hazard.
V-MATRIX 3 ABOUT YOUR VM2143VS 2 VM2143VS 8-in V-MATRIX™ Video Input Card The VM2143VS is an 8-In Video Input Card designed for use in a V-Matrix™ System and can handle a wide array of signal formats. The VM2143VS can be used for video signals including Composite Video, S -Video, Component Video, RGsB, RGBS and RGBHV.
V-MATRIX 4 APPLICATION DIAGRAM 5 Diagram 1 : Connections.
V-MATRIX 5 Diagram 2 : AC Coupled/75 Ohms Jumper Settings for Video Signal AC Coupled/75 Ohm Input Impedance Note: In the diagram above, the jumpers are set for 75 ohms input impedance on the following ports: P20, P23, P21, P22, P24, P27, P25 and P26.
V-MATRIX 6 Diagram 3 : DC Coupled/75 Ohms Jumper Settings for Video Signal DC Coupled/75 Ohm Impedance Note: In the diagram, above, the jumpers are set for 75 ohms input impedance on the following ports: P20, P23, P21, P22, P24, P27, P25 and P26. (Jumpered pins have dark circles.
V-MATRIX 7 Diagram 4 : AC Coupled/High Z Jumper Settings for Video Signal AC Coupled/High Impedance Note: In the diagram above, the jumpers are set for High impedance on the following ports: P20, P23, P21, P22, P24, P27, P25 and P26. (Jumpered pins have dark circles.
V-MATRIX 8 Diagram 5 : DC Coupled/High Z Jumper Settings for Video Signal DC Coupled/High Impedance Note: In the diagram above, the jumpers are set for High impedance on the following po rts: P20, P23, P21, P22, P24, P27, P25 and P26. (Jumpered pins have dark circles.
V-MATRIX 9 Diagram 6 : Internal View VM2143VS Internal Block Diagram 8 7 6 5 4 3 1 2 INPUT HI Z (SYNC) LOW Z (VIDEO) GLI GLI GLI GLI GLI GLI DC/AC GLI GLI 7 8 POWER 5 6 2 3 4 1 OUT BNC (SYNC) HI Z (VI.
V-MATRIX 10 INSTALLING YOUR VM2143VS 6 Step 1. Decide which type of input video signal will be used on each input and what the impedance requirements are of the input source.
V-MATRIX 11 8.2 POOR DISPLAY QUALITY Cause 1: Incompatible devices. Solution: Make sure the video source and the display being connected are compatible devices. Check the manufacturer's specifications if necessary. If the devices are compatible, see Cause 2.
An important point after buying a device Altinex VM2143VS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex VM2143VS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex VM2143VS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex VM2143VS you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex VM2143VS will certainly help you make a decision on the purchase.
If you already are a holder of Altinex VM2143VS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex VM2143VS.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex VM2143VS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex VM2143VS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
