Instruction/ maintenance manual of the product KG 260 CA Gaggenau
Go to page of 14
Operating and assembly instructions KG 260 CA Gas cooker.
1 FOR Y OUR SAFETY Page 2 W arnings Page 3 Preface Page 4 1. Important notes Page 5-6 1.1 F or your safety Page 5 1.2 Operating for the first time Page 5 1.3 About use Page 6 2. Structure and operating principle Page 7-8 2.1 Structure Page 7 2.2 Special accessories Page 7 2.
FOR Y OUR SAFETY 2 W ARNING: If the information in this manual is not followed exactly , a fire or explosion may result causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
1. Do not allow the flame to extend beyond the edge of the cooking utensil. This instruction is based on safety considerations. 2. Do not forget that the unit becomes hot when in use. Common sense is important. Just because the flame is out, it does not mean parts still cannot be hot.
4 Cooking with your new gas cooker will be even more fun than before. The appliance offers you the following advantages: – Regulation from hot to cold in seconds.
1.1 F or your safety Y ou must not operate the appliance if it is damaged. When connecting electrical appliances in the proxi - mity of the appliance, make sure that connecting leads do not come into contact with hot cooking surfaces! As the user , you yourself are responsible for maintenance and proper use in the household.
1.3 About use The appliance is intended solely for use in the household and must not be put to any other uses. Use the appliance to prepare meals only . It must not be used to heat up the room in which it is installed. Use of a gas cooker generates heat and humidity in the room where it is installed.
2.1 Structure 2.2 Special accessories 1 Pot grille 2 High burner , 9500 BTU (2.8 kW) 3 Normal burner , 6500 BTU (1.9 kW) 4 Control knob for the front left cooking position 5 Control knob for the rear .
2.3 Operating principle The appliance features one-hand operation. That is to say , the ignition is activated when the control knob is pressed briefly . After igniting, keep the control knob pressed for around 5-8 seconds more because the heat sensor that opens the gas channel has to warm up first.
9 The cooking positions must only be ignited when all burner parts are fitted. Otherwise, malfunctions may occur on the ignition unit. Switching on (Fig. 5): – Place a pot or a pan on the corresponding cooking position. – Fully press in the control knob for the corresponding cooking position.
Wipe off spilt food immediately , thus ensuring that it cannot burn in on the hob. Caution! The burner gets very hot during operation! Never use abrasive or caustic cleaning agents. Y ou should only clean the control panel and the control knobs with detergent and a a soft cloth.
5.1 General 5.2 Remedying slight malfunctions yourself The appliance must be disconnected from the power supply during all repair work. In the event of malfunctions , check whether the gas and electricity supply is in proper working order , i.e. the gas valve is open and the plug has been plugged into the socket.
12 T echnical data (gas) Burners: Normal burner Full burning 6500 BTU (1.90 kW) Low burning < 1400 BTU (0.41 kW) High-intensity burner Full burning 9500 BTU (2.
5551 McFADDEN AVENUE HUNTINGTON BEACH, CA 92649 USA Y (800) 828-9165 · FAX (714) 901-0979 www.gaggenau-usa.com GAGGENAU HAUSGERÄTE GMBH P.O. BOX 10 02 50 · 80076 MÜNCHEN GERMANY Y (0 89) 45 90 - 0.
An important point after buying a device Gaggenau KG 260 CA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gaggenau KG 260 CA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gaggenau KG 260 CA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gaggenau KG 260 CA you will learn all the available features of the product, as well as information on its operation. The information that you get Gaggenau KG 260 CA will certainly help you make a decision on the purchase.
If you already are a holder of Gaggenau KG 260 CA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gaggenau KG 260 CA.
However, one of the most important roles played by the user manual is to help in solving problems with Gaggenau KG 260 CA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gaggenau KG 260 CA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
