Instruction/ maintenance manual of the product RE-AM45020 Fusion
Go to page of 2
REACTOR AMPLIFIERS RE-AM45020, RE-AM90010, RE-AM90040 Amplifier Specifications Installation Guidelines 1. Ensure the +12v lead is disconnected from the battery before you connect any new equipment. 2. Ensure the mounting location will not interfere with the gas tank, brake lines or electrical wiring.
Turn the amplifier level to zero Turn the volume of the head unit to ¾ and the bass and treble to zero Adjust the level control until the desired maximum volume is achieved without distortion. Failure to follow these steps may cause permanent damage to the audio system.
An important point after buying a device Fusion RE-AM45020 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fusion RE-AM45020 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fusion RE-AM45020 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fusion RE-AM45020 you will learn all the available features of the product, as well as information on its operation. The information that you get Fusion RE-AM45020 will certainly help you make a decision on the purchase.
If you already are a holder of Fusion RE-AM45020, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fusion RE-AM45020.
However, one of the most important roles played by the user manual is to help in solving problems with Fusion RE-AM45020. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fusion RE-AM45020 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
