Instruction/ maintenance manual of the product FRS-1000A Furuno
Go to page of 8
Integrated navigation package RADAR / PL OTTER / SOU NDER Models FRS-1000A/1000B/1000C The future today with FURUNO's electronics technology. FURUNO ELECTRIC CO., L TD. 9-52 Ashihara-cho, Nishinomiya City, Japan Telephone: +81 (0)798 65-2111 Telefax: +81 (0)798 65-4200, 66-4622, 66-4623 TRADE MARK REGISTERED MARCA REGISTRADA Catalogue No.
Photo shows typical Radar/Plotter/Echo Sounder display. Softkeys: Used to select menu options and enter numeric data. MENU keys: To utilize radar, plotter and echo sounder control menus Infrared sensor for remote controller Emergency man-over- board key MODE keys: Turn radar, plotter and echo sounder on and off.
I nnovative Integration of R adar, G PS/ P lotter and E cho Sounder with no-compromise. Highly advanced performance and easy operation ■ All-in-One complete navigation system comprising: - Radar - GPS Receiver (DGPS optional) - Video Plotter - Echo Sounder ■ Vividly clear pictures on the 10.
Full-featured, All-in-One Navigation Package Plotter display in north-up mode Plotter/Sounder display Plotter display with control menu The GPS receiver allows high accuracy position fixes. There is the choice of four presentation modes: North-up, Head-up, Course-up and True Motion.
Radar display with control menu Four presentation modes are available: Head-up, Course-up, North-up and True Motion modes. In the True Motion mode, own ship and targets move according to their actual speed and heading while fixed targets including land echoes remain stationary.
Sounder display in dual-frequency mode The high-performance 50/200 kHz echo sounder meets the need of recreational and professional fishermen. It presents echoes in Normal (single or dual frequency), Bottom zoom, Bottom lock or Marker zoom display mode.
SYSTEM CONFIGURATION For FRS-1000B For FRS-1000C RSB-0071-057 RADAR ANTENNA GPS/DGPS ANTENNA For FRS-1000A 10.5 to 40.0 VDC GP A-016 TRANSDUCER Optional 1 15/230 V AC 1 ∅ , 50/60 Hz PROCESSOR UNIT RSM-001 DGPS BEACON RECEIVER BOARD * 3 AUTO PLOTTER ARP-10 * 2 GYRO CONVERTER AD-100 HEADING SENSOR PG-1000 RECTIFIER RU-1746B-2 SPEED/TEMP .
GENERAL Display Unit 10.4-inch color LCD, 640 (H) x 480 (V) dots Display Modes (1) Radar (2) Plotter (3) Echo sounder (4) Radar/Plotter(5) Radar/Echo sounder (6) Plotter/Echo sounder (7) Radar/Plotter/Echo sounder POWER SUPPLY 10.5 to 40.0 VDC, 100 W max RADAR 1.
An important point after buying a device Furuno FRS-1000A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furuno FRS-1000A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furuno FRS-1000A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furuno FRS-1000A you will learn all the available features of the product, as well as information on its operation. The information that you get Furuno FRS-1000A will certainly help you make a decision on the purchase.
If you already are a holder of Furuno FRS-1000A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furuno FRS-1000A.
However, one of the most important roles played by the user manual is to help in solving problems with Furuno FRS-1000A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furuno FRS-1000A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
