Instruction/ maintenance manual of the product FCV-585 Furuno
Go to page of 57
.
i IMPORTANT NOTICES General • The operator of this equipment must read and follow the descriptions in this manual. Wrong op- eration or maintenance can cancel the warranty or cause injury. • Do not copy any part of this manual without written permission from FURUNO.
ii SAFETY INSTR UCTIONS Safety Instructions for the Operator WARNING Do not open the equipment. There are no user-serviceable parts inside. Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.
SAFET Y I NSTRUCT IONS iii Safety Instructions for the Installer WARNING Turn off the power at the switchboard before beginning the installation. Fire or electrical shock can result if the power is left on. Be sure no water leaks in at the trans- ducer or sensor mounting location.
iv T ABLE OF CONTENTS FOREWORD .......... ..................... v SYSTEM CONFIGURATION ..... vi EQUIPMENT LISTS .................. vii 1. OPERATION ........................... 1 1.1 Control Description ......................... 1 1.2 Power On/Off ....
v FOREWORD A W ord to FCV -620/585 Owners Congratulations on your choice of the FURUNO FCV-620/585 Color LCD Sounder. We are confident you will see why the FURUNO name has become synonymous with quality and reliability.
vi SYSTEM CONFIGUR A TION FCV -620 FCV -585 DISPLAY UNIT CV-620 : Standard : Option Power supply 12-24 VDC : Local Supp ly Water temperature/speed sensor ST-02MSB, ST-02PSB Water temperature sensor T-.
vii EQUIPMENT LISTS Standard supply for FCV-620 Standard supply for FCV-585 Name T yp e Code No . Qty Remarks Display Un it CV -620 - 1 With hard cover Transduc er 520-5P SD 000-015- 204 1 Thru-h ull .
EQUIPM ENT LIS TS viii Optional equipment f or FCV-620/ 585 Name T yp e Code No. Qty Remarks Install ation Ma teri als (CP02- 07900) • Cabl e assy . (1 pc., KO N-004-0 2M, 000-1 56- 405, fo r power an d data ) • Self-t apping screw (4 pcs. , 5x25 SU S304, 00 0-162-61 0-10) Acces sori es (FP02-0 5601) • Flush mount i ng spong e ( 1 pc.
1 1. OPERA TION 1.1 Co ntrol Description Displa y unit for FCV-62 0 Note: Th e FCV-620 and FCV- 585 share th e same featur es. For s ake of bre vity, this manual uses “FCV -6 20” . How to r em ove th e h ar d cov er Plac e fin gers be lo w co ver, pull c over fo rw ard and l ift it.
1. OPERATION 2 1.2 Power On/Off 1. Press the /BRILL key to turn on the power. The unit beeps, the st artup screen appears, and then the equipment checks the ROM and RAM for proper operation. After the completion of the equipment check, the last- used display appears.
1. OPERATION 3 2. Rotate the MODE knob again to choose the display mode desired. The screen you chose appears so on there- after . Single frequency display Low frequency (50 kHz) The sounder uses ultras onic signals to detect bottom conditions. The lo wer the frequency of the signal, the wider th e detection ar ea.
1. OPERATION 4 Bottom zoom display This mode expands bottom and bottom fish on the left-half window. Th is mode is useful for determining bottom contour. When the bottom depth increase s, the display au tomatically shift s to keep the bottom echo at the lower part of the screen.
1. OPERATION 5 1.5 Choosing Range The basic range may be chosen in Auto or Manual mode. 1. Press the RANGE key to open the range se t- ting window . Range setting window 2. Use W or X to choose Auto or Manual. Auto: The range changes automatically to display the bottom echo on the screen.
1. OPER ATI ON 6 Manual gain adjustment The GAIN knob adj usts the sensit ivit y of the recei ver . Gener ally , u se a highe r gain sett in g for grea ter d epths and a lowe r sett ing for shal low er wat e rs. Ex am p les o f pr op er an d im p ro per gain 1.
1. OPERATION 7 the menu window ( left) is displayed to gray . Y ou may also use X to move the cursor . 4. Use S or T to choose the menu item desired and press the ENTER key . The selected setting box or window appears. Setting box Setting window 5. Use S or T to choose an option.
1. OPERATION 8 1.10 Choosing Picture Advance S peed The picture advance sp eed determin es how quickly the vertical sc an lines run across the screen. When choosin g a picture advance speed, keep in mind that a fast advance spe ed will expand the size of the fish school horizon- tally on the scr een and a slow advance speed will contract it.
1. OPERATION 9 1. Press the MENU/ESC key to open the men u. 2. Use S or T to choose Sounder and press the ENTER key . 3. Use S or T to choose Interference an d press the ENTER key . Interference setting window 4. Use S or T to choose the degree of sup- pression desired and press the ENTER key .
1. OPERATION 10 Color Erase setting window 4. Use S or T to choose the color to erase an d press the ENTER key . The settin g range is 0 to 50 % in interva ls of five. The larger the set- ting value, the greater the degree of erasion. 5. Press the MENU/ESC key twice to close the window .
1. OPERATION 11 1.15 Fish Information You can turn the fish symbol indication (Solid or Striped) on or off. Also, you can show or hide the fish size and the depth value. For details about the Fish Symbols, see the information which follows the procedures in th is sectio n.
1. OPERATION 12 • When Fish Symbols or Fish Info are enabled, 50 kHz and 200 kHz b eams are transmitted alternately even if a single fre- quency mode is in use. • Fish within the zero line area are not mea- sured. • T o reduce error , the detection area should be approx.
1. OPERATION 13 Depth setting window Temperature, Speed setting box 7. Use S or T to set starting depth, tempera- ture or speed as appropriate and press the ENTER key . For Bottom and Fish (Normal), the starting depth is the range from the trans- ducer , and for Fish (B/L), from the bottom.
1. OPERATION 14 1.18.1 Registering a waypoint Registering a waypoint on the screen 1. Press the MARK key . The cursor appears along with waypoint entry instructions. T o enter a waypoint to the current own ship's position, go to step 3. Cursor Note: If there is no position data the message "No position data!" appears.
1. OPERATION 15 3. Use S or T to choose WPT List and press the ENTER key . WPT List window 4. Use S or T to choose an empty waypoint and press the ENTER key . The W aypoint setting window appears. Lat and Lon indicate the current position. 5. Use S or T to choose item desired and press the ENTER key .
1. OPERATION 16 4. Press the ENTER key . Note: Applicable data must be input to the 12- 24 VDC/NMEA port in order to display the data mentioned in the table below. Graphic displays Digital displays Note: When data is lost 30 sec., the display shows “- -” at the location where data is lost.
1. OPERATION 17 1.20 Menu Items This section describes menu items not previ- ously mentioned. For the System menu, see chapter 2. Sounder menu Sounder menu Zoom Mode: Choose the zoom display to show among bottom lock, bottom zo om and marker zoom when “zoom” is chosen with the MODE knob.
1. OPERATION 18 against short ran ge echoes. Note that this func- tion is operative when manual is selected on the GAIN knob. Smoothing: Smoothes echo presentation when enabled.
1. OPERATION 19 Colors: Choose the number of colors to use: 8, 16 or 64. Header Info: Turn the data area in dication (appears at the top on the screen) o n or off. Data area Data menu This menu mainly sets up h ow to display data input by external e quipment.
20 2. SYSTEM MENU 2.1 Dis playin g S yste m Sub Menu The Syste m menu mainly consists of i tems wh ich on ce s et do not re qu ire fr equ en t adju st- me nt. This me nu has nin e sub me nu s. To dis - play ea c h s ub m e nu , do t he f oll ow in gs .
2. SYSTEM MENU 21 Japanese. To change language, select la n- guage desired and press the ENTER key . 2.5 Unit s Menu Units menu Depth: Choose unit of depth me asurement from m, ft, fa, pb or HR (Japanese). Temp: Choose unit of temperature measure- ment from ° C or ° F.
2. SYSTEM MENU 22 2.7 Demo Menu Demo menu Demonstrate: The demonstration mode pro- vides, without connection of the transd ucer, simulated operation of the eq uipment, using internally generated echoes. All cont rols are operative. The message “DEMO” appears at the bottom right corner on the screen when the demonstrate mode is active.
23 3. MAINTENANCE, TROUBLE- SHOOTING 3.1 Maintenance Regular maintenance is essential for good performance. Checking the items listed in the table below monthly will help keep your equip- ment in good shape for years to come. 3.2 Cleaning the Display Unit Dust or dirt may be removed from the cabinet with a soft cloth.
3. MAINTENANCE, TROUBLESHOOTING 24 3.6 T roubleshooting The table below prov ides basic trouble- shooting procedures which the user may follow to restore normal operation. 3.7 Diagnostics If you feel your unit is not working prop erly, conduct the diagnost ic test to find the problem.
3. MAINTENANCE, TROUBLESHOOTING 25 Checking GAIN knob : Rota te the knob. The indication goes higher with clockwise rotation; lower with counterclockwise rota- tion. Press the knob. The knob corre- sponding on-screen circle "lig hts" in red if the knob is normal.
26 4. INST ALLA TION 4.1 Display Unit Mounting considerations The display unit can be installed on a ta bletop or flush mounted in a panel. When choosin g a location keep the following in mind: • The temperature and humidity should b e moderate and stable.
4. INSTALLATION 27 4.2 Thru-hull Mount T ransducer Transducer mounting location The thru-hull mount transducer (520-5PSD, 520-5MSD) provides the best p erformance of all, since the transducer protrudes fro m the hull and the effect of air bubbles and t urbu- lence near the hull skin is reduced.
4. INSTALLATION 28 Typical thru-hull mount transducer installations Typical thru-hull mount transducer installations Procedure for installing the thru-hull mount transducer 1. With the boat hauled out of the water , mark the location chosen for mounting the trans- ducer on the bottom of the hull.
4. INSTALLATION 29 4.3 T ransom Mount T ransducer The transom mount trans ducer is very com- monly employed, usually on relatively small I/ O or outboard boats. Do not u se this method on an inboard motor boat beca use turbulence is created by the propeller ahead of the trans- ducer.
4. INSTALLATION 30 Remarks on installation • T urn off th e engine and anchor the boat while installing t he equipment. • Install the transducer in the engine room. • Except for installing the transducer to the bottom of hull, do not turn on it s power so it may be damaged.
4. INSTALLATION 31 b)Gently dismount the transducer with a knife or a piece of wood. c)Reattach the transducer e lsewhere as shown in "Attaching the transducer." d)Check the inst allation again. Final preparation Support the transducer with a piece of woo d to keep it in place while it is drying.
4. INSTALLATION 32 Note 3: For single drive boat, mount on the starboard side at least 75 mm (3") beyond the swing radius of the propeller. Mounting location on single drive boat Note 4: For twin drive boat, mount between the drives. Installation of bracket 1.
4. INSTALLATION 33 3. If the bracket has been temporarily fas- tened to the transom, remove it. Apply a marine sealant to the threads of the three #10 x 1-1/4" self tappin g screws to prevent water seeping into the transom. Screw the bracket to the hull.
4. INSTALLATION 34 8. Position the two cabl e clamps and fasten them in place. If used, push the cable cover over the cable and screw it in place. 9. Route the cable to the instrument being careful not to tear the cable ja cket when passing it tho ugh the bulkhead(s) and other part s of the boat.
4. INSTALLATION 35 Thru-hull mount water temperature sensor T-02MSB, T-03MSB • Select a suitable mounting location consid- ering the following point s: • Select a mid boat flat position.
4. INSTALLATION 36 How to fix fuse holders Establishing the ground The ground wire (1.25 sq or mo re, local supply) should be as short as possible. The signal line ground is isolat ed from the chassis ground, however the power line is not insu- lated.
4. INSTALLATION 37 Matching box MB-1 100 *: With 10P connector cable **: For connecting two transducers Fabricating the transducer cable Fabricate the transducer cable as below and connect it to the matching box. How to fabricate the transducer cable 4.
4. INSTALLATION 38 4.10 Adjustment s af ter Inst allation NMEA 1. Press the MENU/E SC key to open the menu. 2. Use S or T to choose NMEA under System menu and press the ENTER key . NMEA menu NMEA0183 Choose NMEA0183 version of nav equipment connected to “12-24 VDC/NMEA” port among Ver 1.
39 MENU TREE MENU key Sounder Pic. Advance (4/1, 2/1, 1/1 , 1/2, 1/4, 1/8, 1/16, Stop) Zoom Mode ( Bottom Lock , Bottom Zoom, Marker Zoom) Shift (0 - 2500 ft, 0 ft ) Bottom Zone Interference (Off, Low.
MENU TREE 40 Data Go to WPT ( Off , Destination 1 - 20) WPT List Data Box 1 ( Off , Speed (SOG), Speed (STW), Depth, Range, Bearing, Position, Wind, Heading, Course, Barom Press, Temp, Time to Go, Tri.
FURUNO FCV -620/585 SP - 1 E2374S01D- M SPECIFI CA TIONS OF ECHO SOUND ER FCV -6 20/ 58 5 1. GEN ERA L 1.1 TX Fr equenc y 50 kH z and 200 kH z 1.2 Transm it Method Sing le or dual f r eq uency tr ansm i tti ng 1.3 Outp ut Pow er FC V-620 600 W FC V-585 600 W or 1 kW sel ectab l e 1.
FURUNO FCV -620/585 SP - 2 E2374S01D- M 3. IN TERFA CE 3.1 Inp ut Data Se nte nces IEC6116 2- 1 (N M EA0183 Ver 1 .5/2 .0/ 3.0) Or der of pr ior i ty Latit ude/ Lo ngi tude: GGA> RM C >RM A>G.
28/May/2010 Y.NISHIYAMA D-1 西山義浩 電子署名者 : 西山義浩 DN : cn= 西山義浩 , o, ou= 情技課 , email=yoshihiro.nishiyama@furuno.co.
2/Apr/2010 Y.NISHIYAMA D-2 西山義浩 電子署名者 : 西山義浩 DN : cn= 西山義浩 , o, ou= 情技課 , email=yoshihiro.nishiyama@furuno.co.jp, c=JP - 日本 日付 : 2010.
D-3.
2 4 3 A 1 B C TITLE NAME 名称 INTERCONNE CTION DIAGRA M COLOR LCD SOUN DER 相互結線図 カラーLCD魚探 FCV-620/58 5 NOTE *3. CONNECTOR PLUG FITTED AT FACTO RY. 注記 ＊１）造船所手配。 ＊２）オプション。 ＊３）コネクタは工場にて取付済み。 *1.
.
FURUNO ELECTRIC CO., LTD. 9-52 Ashihara-Cho, Nishinomiy a City, 662-8580, Hy ogo, Japan Tel: +81 798-65-2111 Fax: +81 798-65-4200 Pub NO. DOC-852 EC Declaration of Conformity We FURUNO ELECTRIC CO.
An important point after buying a device Furuno FCV-585 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furuno FCV-585 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furuno FCV-585 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furuno FCV-585 you will learn all the available features of the product, as well as information on its operation. The information that you get Furuno FCV-585 will certainly help you make a decision on the purchase.
If you already are a holder of Furuno FCV-585, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furuno FCV-585.
However, one of the most important roles played by the user manual is to help in solving problems with Furuno FCV-585. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furuno FCV-585 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
