Instruction/ maintenance manual of the product 1942 MARK-2 Furuno
Go to page of 46
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
An important point after buying a device Furuno 1942 MARK-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furuno 1942 MARK-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furuno 1942 MARK-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furuno 1942 MARK-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Furuno 1942 MARK-2 will certainly help you make a decision on the purchase.
If you already are a holder of Furuno 1942 MARK-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furuno 1942 MARK-2.
However, one of the most important roles played by the user manual is to help in solving problems with Furuno 1942 MARK-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furuno 1942 MARK-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
