Instruction/ maintenance manual of the product PM-8 II Furman Sound
Go to page of 12
SERIES II 15 AMP POWER CONDITIONERS.
SERIES II 15 AMP POWER CONDITIONERS PL-8 Series II Additional Features • T wo retractable, long-life, low-heat LED light xtures with dimmer control for rack illumination • BNC connector on the rear panel allows you to attach any standard (12V AC 0.
SERIES II 15 AMP POWER CONDITIONERS I N T R O D U C T I O N Thank you for purchasing a Furman Series II Power Conditioner , and congratulations on your choice. The Series II power conditioners feature Furman’s revolutionary Series Multi- Stage Protection Plus (SMP+) circuit, as well as our exclusive Linear Filtering T echnology (LiFT).
SERIES II 15 AMP POWER CONDITIONERS WA R N I N G T o reduce the risk of electrical shock, do not expose this equipment to rain or moisture. Dangerous high voltages are present inside the enclosure. Do not remove the covers. Refer servicing to qualied personnel only .
SERIES II 15 AMP POWER CONDITIONERS The PL-8 II features LED rack lights which produce virtually no heat and provide an extremely long life span. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off.
SERIES II 15 AMP POWER CONDITIONERS heavy-duty power cable. O P E R A T I O N Retractable Rack Lights, Rear Panel Lamp and Dimmer Control: The PL-8 II, PL-Plus, and PL-Plus D II utilize a dimmer control for the two retractable front panel light tubes.
SERIES II 15 AMP POWER CONDITIONERS Shutdown cutoff voltage (135 - 140 volts, 2 60 – 265 volts E version, 120 - 125 volts J version ). (3) If none of the LED’s on the voltmeter are lit, and the Ex.
SERIES II 15 AMP POWER CONDITIONERS voltage rating will be compromised. The unit must be returned to Furman Sound, or an authorized Furman Service center for repair .
SERIES II 15 AMP POWER CONDITIONERS into AC lines by nearby radio transmitters, certain kinds of lighting, electric motors, and other sources. Because noise occurs at higher frequencies than the 50 or 60 Hz AC line, it can be effectively reduced through use of low-pass ltering.
SERIES II 15 AMP POWER CONDITIONERS SPECIFICA TIONS Current rating: 15 amps (“E” versions 10 amps) Operating V oltage: 90 to 140 V AC (“E” versions 180 to 260 V AC) Over V oltage Shutdown: 140.
SERIES II 15 AMP POWER CONDITIONERS 8 Switched Outlets BNC Connector for Goosneck Light Light Switch Dimmer Control Circuit Breaker Power Switch V oltmeter LED Rack Lights Additional Switched Outlet P.
SERIES II 15 AMP POWER CONDITIONERS 1 1 1804-C Furman Sound, LLC. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www .
An important point after buying a device Furman Sound PM-8 II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furman Sound PM-8 II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furman Sound PM-8 II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furman Sound PM-8 II you will learn all the available features of the product, as well as information on its operation. The information that you get Furman Sound PM-8 II will certainly help you make a decision on the purchase.
If you already are a holder of Furman Sound PM-8 II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furman Sound PM-8 II.
However, one of the most important roles played by the user manual is to help in solving problems with Furman Sound PM-8 II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furman Sound PM-8 II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
