Instruction/ maintenance manual of the product HRM-16 Furman Sound
Go to page of 12
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM HEADPHONE/AUDIO DISTRIBUTION AND REMOTE MIXING SYSTEM H D S - 1 6 H R M - 1 6 MONITORING SERIES.
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM INTRODUCTION The HDS-16/HRM-16 Headphone/Audio Distribution System is the latest addition to the Furman Sound headphone/audio distribution product line. The HDS-16 distribution device sends signals to one or more HRM-16 remote mixers; the HDS-16 and HRM-16 are sold separately .
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM matically mute all HRM-16 sends except the channel D stereo and talkback outputs. This unique feature allows each musician to hear a rough or fi nal mix and send soloed tracks from the mix console.
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM 16’s. T alkback is always available from the mix console and the level can be adjusted with the HRM-16’s T ALKBACK VOLUME control.
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM Figure 3: Changing the talkback mode inside the HDS-16 4.
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM CHANGING THE T ALKBACK MODE A jumper located inside the HDS-16 selects between two talkback modes. 1. Use a a Phillips screwdriver to unscrew the middle two screws located near the top of the front panel and all screws on the top.
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM Note: The remote and front panel switches are wired in parallel. Although either switch can activate the SOLO function, both must be in the off position to deactivate it.
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM HRM-16 REMOTE MIXER The HRM-16s receive their input signals and power supply entirely through the Centronics cable from the HDS-16. Eight mono and four stereo channels can be mixed and monitored with head phones or sent to a monitor system.
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM INPUT FROM HDS-16 This connector delivers the input signals and power supply from the HDS-16 (parallel) or from another HRM-16’s OUTPUT T O ADDI- TIONAL HRM-16’s connector (series). The remaining rear panel inputs and outputs are ¼-inch TRS connectors.
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM THREE YEAR LIMITED W ARRANTY Furma n Sound, Inc., hav ing its p rincipal place of bu siness at 1997 Sou th McDowe ll Blvd.
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM 10 HDS-16 SPECIFICA TIONS INPUTS Balanced, 50 kΩ, 90 dB CMRR INPUT IMPEDANCE 50 kΩ LINE OUTPUTS Balanced or singled ended, 50 Ω, 68 dB OCMR SINGLE CHANNEL GAIN 21 dB; +4 dBu for maximum output REMOTE SWITCH Connect tip to ring to mute all outputs except channel D (solo function) SIZE 3.
Furman Sound, Inc. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www .furmansound.com E-mail: info@furmansound.
An important point after buying a device Furman Sound HRM-16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furman Sound HRM-16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furman Sound HRM-16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furman Sound HRM-16 you will learn all the available features of the product, as well as information on its operation. The information that you get Furman Sound HRM-16 will certainly help you make a decision on the purchase.
If you already are a holder of Furman Sound HRM-16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furman Sound HRM-16.
However, one of the most important roles played by the user manual is to help in solving problems with Furman Sound HRM-16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furman Sound HRM-16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
