Instruction/ maintenance manual of the product Elite-16 PF E Furman Sound
Go to page of 12
.
Elite-16 PF E Manual - 2 - F ea tures Power Factor correction provides surplus current for power-starved ampliers Linear Filtering T echnology (LiFT) for unequaled audio / video clarity Series Mult.
Elite-16 PF E Manual - 3 - I ntroductIon For over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. Though the need for pristine AC power is nothing new , the Elite-16 Power Factor’s technology and its unique implementation are revolutionary and without peer .
Elite-16 PF E Manual - 4 - I nst alla tIon : u np ackIng Before unpacking your unit, inspect the carton for any obvious severe damage to the box and internal protective materials. If internal damage is likely , contact the carrier who delivered the unit before proceeding with unpacking.
Elite-16 PF E Manual - 5 - E does not produce any appreciable heat under standard use. The Elite-16 PF E may also be rack mounted in a standard 19” (48.26 cm) rack by attaching the Elite-16 PF E rack ears. These rack ears (contained within the plastic rack kit package) mount ush with the back portion of the Elite-16 PF E’s front panel.
Elite-16 PF E Manual - 6 - continuous current draw may be limited to a range between 2900 - 3500 Watts per Elite-16 PF E employed. The RMS current available before the circuit breaker trips varies due to what is referred to as a vector load.
Elite-16 PF E Manual - 7 - If this happens, some level of protection from voltage surges will remain, but the Furman’s clamping voltage rating will be compromised. The unit must be returned to Furman Sound, or an authorized Furman Service center for repair .
Elite-16 PF E Manual - 8 - W arranty Furman Sound, LLC. warrants to the original purchaser of this product, the Furman Elite-16 PF E, that the product will be free from defects in material and workmanship for a period of three years from the date of purchase.
Elite-16 PF E Manual - 9 - or extension cords. Any such installation voids this warranty . The Furman warranty only protects against damage to properly connected equipment where Furman has determined,.
Elite-16 PF E Manual - 10 - elIte-16 pF e specIFIca tIons ac c urrent c ap acIty : Input - 16 Amp capacity required Output - 13-16 Amps RMS (maximum, all outlets combined - continuous) l Inear n oIse a ttenua tIon : T ransverse (Differential) Mode: >40 dB from 5Khz.
.
Furman Sound, LLC. 1690 Corporate Circle Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www .furmansound.com E-mail: info@furmansound.
An important point after buying a device Furman Sound Elite-16 PF E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furman Sound Elite-16 PF E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furman Sound Elite-16 PF E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furman Sound Elite-16 PF E you will learn all the available features of the product, as well as information on its operation. The information that you get Furman Sound Elite-16 PF E will certainly help you make a decision on the purchase.
If you already are a holder of Furman Sound Elite-16 PF E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furman Sound Elite-16 PF E.
However, one of the most important roles played by the user manual is to help in solving problems with Furman Sound Elite-16 PF E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furman Sound Elite-16 PF E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
