Instruction/ maintenance manual of the product DA1222AT Altinex
Go to page of 9
DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0024-004 DA1222AT 1-IN, 2-OUT RGBHV DISTRIBUTION AMPLIFIER USER’S GUIDE.
DISTRIBUTION AMPLIFIERS 1 INTRODUCTION Altinex appreciates your purchase of the DA1222AT Distribution Amplifier. We are sure you will find it a reliable and useful product. Superior performance for the right price backed by solid technical and customer support is what we have to offer.
DISTRIBUTION AMPLIFIERS 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your DA1222AT Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1222AT and to prevent fire and shock hazard.
DISTRIBUTION AMPLIFIERS 3 • Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment. ABOUT YOUR DISTRIBUTION AMPLIFIER 2 The DA1222AT is a 1-in 2-out RGBHV high- resolution video distribution amplifier.
DISTRIBUTION AMPLIFIERS 4 DESCRIPTION OF DA1222AT 4.
DISTRIBUTION AMPLIFIERS 5 4.1 POWER REQUIREMENTS The DA1222AT may be used with either 90- 140V AC or 200-240V AC for the input for ease of use throughout the world. Always make sure that the fuse box window located above the power input connector displays the proper voltage of the country where it is being used.
DISTRIBUTION AMPLIFIERS 6 INSTALLATION 6 Step 1 . Before you plug in the power cord into the unit, please verify that the voltage rating of 110V/220V on the FUSE CLIP located on the rear of the unit is the same as the power outlet. Step 2. Connect the female end of the power cord to the DA1222AT and plug the male end into the power outlet.
DISTRIBUTION AMPLIFIERS 7 POWER CABLES PS5301US Power Cable for US PS5302UK Power Cable for UK PS5303AU Power Cable for Australia PS5304GR Power Cable for Germany FREQUENTLY ASKED QUESTIONS 9 No: Ques.
DISTRIBUTION AMPLIFIERS 8 TROUBLESHOOTING GUIDE 10 • Please make sure that the amplitude of the analog video signal (RGB) is less than 1.5V. • Please make sure that the amplitude of the SYNC signal is at TTL level. • Please make sure that the proper quality of cables is used to set a perfect picture quality as your source.
An important point after buying a device Altinex DA1222AT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex DA1222AT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex DA1222AT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex DA1222AT you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex DA1222AT will certainly help you make a decision on the purchase.
If you already are a holder of Altinex DA1222AT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex DA1222AT.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex DA1222AT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex DA1222AT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
