Instruction/ maintenance manual of the product ZC350MS8 FUNAI
Go to page of 102
Owner's Manual ZC350MS8 D IGITAL V IDEO D ISC R ECORDER T HANK YOU FOR CHOOSING M AGNAVOX . N EED HELP FAST ? R EAD YOUR Q UICK G UIDE AND / OR O WNER ' S M ANUAL FIRST FOR QUICK TIPS THAT MAKE USING YOUR M AGNAVOX PRODUCT MORE ENJOYABLE .
2E N 2E N PRECA UTIONS This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
3 EN 3 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español PRECA UTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference.
4E N 4E N PRECA UTIONS Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.
5 EN 5 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español PRECA UTIONS Servicing • Please refer to relevant topics on “TROUBLESHOOTING” on pages 86-90 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself.
6E N 6E N C ONTENT S Introduction PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Symbols Used in this Owner's Manual . .
7 EN 7 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español FEA TURES This unit not only plays back DVD and CD but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit.
8E N 8E N FUNC TIONAL O VERVIEW ( * ) The unit can also be turned on by pressing these buttons. 1. Disc tray Place a disc when opening the disc tray. 2. OPEN/CLOSE A button* Press to open or close the disc tray. 3. CHANNEL / buttons Press to change the channel up and down.
9 EN 9 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. • This unit does not have the RF modulator.
10 EN 10 EN FUNC TIONAL O VERVIEW Installing the Batteries in the Remote Control ST ANDBY -ON DTV/TV ABC DEF .@/: JKL MNO GHI TUV WXYZ SP ACE CLEAR SETUP DISC MENU RETURN TITLE CHANNEL TIMER REC MODE AUDIO REC RAPID PLA Y CM SKIP PQRS SOURCE 123 456 78 .
11 EN 11 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español ( * ) The unit can also be turned on by pressing these buttons. 1. DISPLAY button Press to display the display menu on or off. 2. DTV/TV button Press to switch between digital TV mode (DTV) and analog TV mode.
12 EN 12 EN ANTENNA CABLE C ONNEC TION This section describes how to connect your unit to an antenna, cable box, etc. * Once connections are completed, turn on the TV and begin initial setting. Channel scanning is necessary for the unit to memorize all available channels in your area.
13 EN 13 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español RF MODULA T OR C ONNEC TION If your TV has antenna in jack only , it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator.
14 EN 14 EN CONNECTION TO A CABLE / SATELLITE BOX 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Plug in the power cords of the devices to the AC outlet. Note • Required cables and connecting methods differ depending on the cable/satellite box.
15 EN 15 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español Make one of the following connections, depending on the capabilities of your existing device.
16 EN 16 EN C ONNEC TION T O AN A UDIO SY STEM • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information.
17 EN 17 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español CH 10 1/ 5 1/ 5 DVD Video 0:01:00 / 1:23:45 SP(2Hr) 1:53 6 5 1 51 2 2 4 3 * This is an example screen only for explanation. 1. Indicates a disc type and format mode.
18 EN 18 EN 1. Edit Disc Name: Allows you to rename the disc. 2. Erase Disc: (DVD+RW/DVD-RW only) Allows you to erase all contents in the disc and format it.
19 EN 19 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español INITIAL SET TING You need to follow these steps when you turn on this unit for the first time. 1 Press [STANDBY-ON y y ]. Turn the TV on. Select the input to which the unit is connected.
20 EN 20 EN CHANNEL SET TING If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear.
21 EN 21 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español 1 Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add/delete channels. 2 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK].
22 EN 22 EN ANALOG 5 Select the channel number to add or delete. • Use [CHANNEL / ] to cycle through only the memorized channels. • Use [ { / B ] to cycle through all the channels including the ones not memorized. • Use [the Number buttons] to select a channel directly.
23 EN 23 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español SET TING THE CL OCK Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below.
24 EN 24 EN SET TING THE CL OCK 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [ K / L ] to select “Clock”, then press [OK]. “Clock” menu will appear. 3 Use [ K / L ] to select “Daylight Saving Time”, then press [OK].
25 EN 25 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español TUNER SET TINGS Switching Analog Mode / Digital Mode You can easily switch the analog TV (NTS.
26 EN 26 EN 1 Press [AUDIO] to cycle through available audio languages. English 1/2 • When you press [AUDIO] , selected language will be displayed on the TV screen. • Every time you press [AUDIO] , the language will be switched. e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3 • Available languages differ depending on the broadcast.
27 EN 27 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [ K / L ] to select “Channel”, then press [OK].
28 EN 28 EN 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [ K / L ] to select “Display”, then press [OK]. 3 Use [ K / L ] to select “CC Style”, then press [OK].
29 EN 29 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [ K / L ] to select “Display”, then press [OK].
30 EN 30 EN 6 Use [ K / L ] to select the item and switch the setting for each item you want to set, then press [OK]. • When “User Setting” is set to “ON”, you can set the following items. CC style set by “User Setting” will be displayed.
31 EN 31 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español INFORMA TION ON D VD REC ORDING This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/ DVD-RW can be recorded to and erased many times.
32 EN 32 EN BEFORE REC ORDING Use this feature to make the unfinalized +VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title menu is automatically converted to our style.
33 EN 33 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español BASIC RECORDING & ONE-TOUCH TIMER RECORDING 1 Press [STANDBY-ON y y ]. Turn on the TV and be sure to select the input to which the unit is connected.
34 EN 34 EN BASIC REC ORDING & ONE- T OUCH TIMER REC ORDING 7 Press [STOP C ] to stop recording. The recorded title will appear in the title list. (Refer to “Guide to a Title List” on page 62.
35 EN 35 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español TIMER REC ORDING 1 Press [TIMER]. 2 Use [ K / L ] to select “New Program”, then press [OK]. Timer Programming 1/1 MON JAN/01 11:00AM Date Start End CH New Program 3 Use [ K / L ] to enter the date, then press [ B ].
36 EN 36 EN 4 Use [ K / L / s / B ] or [the Number buttons] to enter the start and end time, then press [ B ]. 1/1 New Program Date JAN/02 CH DTV125. 1 Mode SP SP 2 : 00 Start 12 : 00AM End - - : - - 5 Use [ K / L / s / B ] to select analog (“- - -”) / digital (“DTV”) mode or external input (E1 / E2), then press [ B ].
37 EN 37 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español How to select a channel number for the timer recording Analog TV For channel number 2-6 press, press [ B ] or [ • ] to decide the channels. For other channels (7-69), the channel will be decided as soon as you enter the channel number.
38 EN 38 EN TIMER REC ORDING Hints for Timer Recording When the starting time is the same: A program set previously (PROG. A ) has priorit y . PROG. A PROG. B actual recording PROG. A PROG. B The rst 2 minutes (at the longest) will be cut o . PROG.
39 EN 39 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español OVER WRITING UNNECESSAR Y TITLE You can overwrite the existing title from the beginning. 1) Press [STANDBY-ON y y ]. Make sure that the TV input is set on the unit.
40 EN 40 EN OVERWRITING UNNECESSAR Y TITLE When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point.
41 EN 41 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español SET TINGS FOR AN EXTERNAL DEVICE 3 Use [ K / L ] to select “Video Input”, then press [OK]. 4 Use [ K / L ] to select desired external input position, then press [OK].
42 EN 42 EN SET TINGS FOR AN EXTERNAL DEVICE Recording from an External Device 1 Turn on the TV and press [STANDBY-ON y y ], and be sure to select the input of the TV to which the unit is connected. 2 Press [OPEN/CLOSE A ] to open the disc tray. Place the disc to record properly.
43 EN 43 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español SET TING A DISC T O PRO TEC T 1 Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK]. 3 Use [ K / L ] to select “Disc Protect OFF ON”, then press [OK].
44 EN 44 EN PLA Y ING THE DISCS IN O THER DVD PLA Y ERS Finalizing a Disc 1 Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK]. “Disc Edit” menu will appear. 3 Use [ K / L ] to select “Finalize”, then press [OK]. 4 Use [ K / L ] to select “ Yes”, then press [OK].
45 EN 45 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español PLA YING THE DISCS IN O THER DVD PLA Y ERS 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear.
46 EN 46 EN INFORMA TION ON PLA Y BA CK Before you play back DVD, read the following information. This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below.
47 EN 47 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español You can select images or information on the menu screen by activating the PBC (playback control) function of the video CD. This unit conforms to ver.
48 EN 48 EN BASIC PLA Y BA CK Direct Playback 1 Press [STANDBY-ON y y ]. Turn on the TV and be sure to select the input to which the unit is connected. 2 Press [OPEN/CLOSE A ] to open the disc tray and insert your disc with its label facing up. Align the disc to the disc tray guide.
49 EN 49 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español BASIC PLA YBA CK 1 Press [STANDBY-ON y y ]. Turn on the TV and be sure to select the input to which the unit is connected. 2 Press [OPEN/CLOSE A ] to open the disc tray and insert your disc with its label facing up.
50 EN 50 EN 4 Use [ K / L ] to select a desired title, then press [OK]. 1 SP (2Hr) 2 3 NOV/21/07 11:00 AM CH12 SP NOV/21/07 0:20:44 NOV/22/07 11:35 AM CH13 EP NOV/22/07 0:10:33 EMPTY TITLE 1:37:52 SP(.
51 EN 51 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español BASIC PLA YBA CK Playing Back an Audio CD and a CD-RW/-R with MP3 Files Note • The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck.
52 EN 52 EN BASIC PLA YBA CK Using the Title / Disc Menu DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. 1) Press [TITLE] or [DISC MENU] to call up the title list or disc menu.
53 EN 53 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español SPECIAL PLA Y BA CK You can skip TV commercials to enjoy the recorded programs without interrupting. During playback, press [CM SKIP]. Normal playback will start at 30 seconds ahead from the point you press [CM SKIP] .
54 EN 54 EN SPECIAL PLA YBA CK Rapid playback function is available only during playback. This function is available only on discs recorded in the Dolby Digital format, and plays back in a slightly faster/ slower speed while keeping the sound quality just as normal playback.
55 EN 55 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español SPECIAL PLA YBA CK Zoom Note • When selecting a smaller factor than the current one, the zoom area will not be displayed. • To exit the zoom menu, press [DISPLAY] again at step 1.
56 EN 56 EN SEARCH Using [ H ] / [ G ] 1) During playback, press [ G ] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. • If there is no chapter in one title, the current title will be skipped.
57 EN 57 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español 1) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [OK]. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) audio CD 1/ 5 CD 0:00:15 / 0:05:00 The number next to will be highlighted.
58 EN 58 EN REPEAT / RANDOM / PROGRAM PLAYBACK Repeat Playback Random Playback Available repeat function may vary depending the discs. 1) During playback press [DISPLAY]. 2) Use [ { / B ] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu.
59 EN 59 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español Program Playback Note • To erase tracks you selected, press [CLEAR] at step 4. • You can make program settings up to 50 tracks. • To cancel program playback, press [STOP C ] twice during program playback.
60 EN 60 EN DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages anytime during playback. 1) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu.
61 EN 61 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español You can enjoy stereophonic virtual space through your existing 2 channel stereo system. 1 ) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu.
62 EN 62 EN INFORMA TION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TITLE].
63 EN 63 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING DISCS 3 Use [ K / L ] to select “Edit”, then press [OK].
64 EN 64 EN EDITING DISCS Putting Names on Titles 4 Use [ K / L ] to select “ Yes”, then press [OK]. Edit - Edit Title Name No Ye s MY F AV ORITE 1 0:00:59 The name you entered will be activated for the title. 5 After this operation is completed, press [RETURN] to exit.
65 EN 65 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING DISCS Setting Chapter Marks 1 Follow steps 1 to 3 in “Deleting Titles” on page 63 to display “Edit” menu. 2 Use [ K / L ] to select “Chapter Mark”, then press [OK].
66 EN 66 EN EDITING DISCS Clearing Chapter Marks 1 Follow steps 1 to 3 in “Deleting Titles” on page 63 to display “Edit” menu. 2 Use [ K / L ] to select “Chapter Mark”, then press [OK]. Submenu will appear. 3 Use [ H ] / [ G ] to select a chapter mark to be deleted.
67 EN 67 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING DISCS Clearing Chapter Marks (cont’d) To delete all chapter marks: 1 Follow steps 1 to 3 in “Deleting Titles” on page 63 to display “Edit” menu.
68 EN 68 EN EDITING DISCS Hiding Chapters 1 Follow steps 1 to 3 in “Deleting Titles” on page 63 to display “Edit” menu. 2 Use [ K / L ] to select “Hide Chapter”, then press [OK]. Submenu will appear. 3 Use [ H ] / [ G ] to decide the chapter to be hidden.
69 EN 69 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING DISCS Setting Pictures for Thumbnails 1 Follow steps 1 to 3 in “Deleting Titles” on page 63 to display “Edit” menu.
70 EN 70 EN EDITING DISCS Dividing a Title 1 Follow steps 1 to 3 in “Deleting Titles” on page 63 to display “Edit” menu. 2 Use [ H ], [ G ], [ E ], [ D ], [PAUSE F ] and [PLAY B ] to decide the point at which you will divide the title. 3 Use [ K / L ] to select “Title Dividing”, then press [OK].
71 EN 71 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español Putting Name on Disc Press [STOP C ] if you are playing back a disc. 1 Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK].
72 EN 72 EN EDITING DISCS Setting or Releasing Disc Protect 1 Follow steps 1 to 2 in “Putting Name on Disc” on page 71 to display “Disc Edit” menu.
73 EN 73 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING DISCS Erasing Disc Press [STOP C ] if you are playing back a disc. 1 Follow steps 1 to 2 in “Putting Name on Disc” on page 71 to display “Disc Edit” menu.
74 EN 74 EN EDITING DISCS Making Edits Compatible Press [STOP C ] if you are playing back a disc. 1 Follow steps 1 to 2 in “Putting Name on Disc” on page 71 to display “Disc Edit” menu. 2 Use [ K / L ] to select “Make Edits Compatible”, then press [OK].
75 EN 75 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español LIST OF SET TINGS The following table is the contents which you can set and the default setting. Refer to the following table for useful operation.
76 EN 76 EN LIST OF SET TINGS Setup Items (highlight is the default) Contents General Setting Display Pages 81-82 CC Style Pages 28-30 Font Opacity Solid Translucent Flash Set the font opacity of the displayed caption. Font Color Transparent White Black Red Green Blue Yellow Magenta Cyan Set the font color of the displayed caption.
77 EN 77 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español SETUPS Press [STOP C ] if you are playing back a disc. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear.
78 EN 78 EN SETUPS 1 Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.
79 EN 79 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español SETUPS 2 Disc Audio Choose the appropriate audio setting for your external device. It will only affect a disc playback. Use [ K / L ] to select a desired item, then press [OK] .
80 EN 80 EN SETUPS 3 Disc Menu Language (Default : English) Set the language for disc menu. Use [ K / L ] to select a setting, then press [OK]. General Setting Playback Display Video Recording Clock C.
81 EN 81 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español SETUPS Press [STOP C ] if you are playing back a disc. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. 2 Use [ K / L ] to select “Display”, then press [OK].
82 EN 82 EN SETUPS 1 OSD Language (Default : English) Set the language for the on-screen display. Use [ K / L ] to select a setting, then press [OK]. General Setting Playback Display Video Recording Clock Channel Reset All OSD Language Screen Saver CC Style V -Chip OSD Language English Français Español Your setting will be activated.
83 EN 83 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español SETUPS Press [STOP C ] if you are playing back a disc. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. 2 Use [ K / L ] to select “Video”, then press [OK].
84 EN 84 EN 1 Progressive Scan (Default : OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.
85 EN 85 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español Reset the setting to default. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear.
86 EN 86 EN TROUBLESHOO TING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
87 EN 87 EN Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español TROUBLESHOO TING Symptom Remedy Playback The disc does not play back. • No disc is inserted. • A blank disc is inserted. • The disc is upside down.
88 EN 88 EN TROUBLESHOO TING Symptom Remedy Others The unit does not operate properly. • When static electricity, etc., causes the unit to operate abnormally, unplug the unit and then plug it in again. The disc tray does not open when you press [OPEN/CLOSE A ] .
89 EN 89 EN Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español TROUBLESHOO TING Error message Cause Solution Disc Error — Please eject the disc. — Playback feature may not be available on this Disc. • Unplayable disc is inserted in the unit.
90 EN 90 EN Frequently Asked Questions TROUBLESHOO TING – Can I record to CD-RW/-R? No, this unit records only DVD. – Can I play back DVD-video that is bought in another country? Possible when the region code of the disc is 1 and All. – Can I connect the unit to my PC? No, you cannot control the unit by PC.
91 EN 91 EN Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español LANGU A GE C ODE Language Code Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic .
92 EN 92 EN Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Aspect Ratio The width of a TV screen relative to its height.
93 EN 93 EN Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español SPECIFICA TIONS Note • The specifications and design of this product are subject to change without notice.
94 ES ESP AÑOL Logotipo Atributos Disco de 8 cm / 12 cm, un solo lado , una sola capa Tiempo de grabación máx. apr ox. (modo SLP): 360 minutos (4,7 GB) (para 12 cm) 108 minutos (1,4 GB) (para 8 cm).
Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español 95 ES 1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA. 2) Efectúe la conexión básica ilustrada más abajo. Conexión Básica 1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.
96 ES Cuando usted encienda este aparato por primera vez necesita seguir estos pasos. 1 Presione [STANDBY-ON y y ]. Encienda el televisor. Seleccione la entrada a la cual está conectado el aparato. 2 Utilice [ K / L ] para seleccionar su idioma deseado, y luego presione [OK] para establecerlo.
Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español 97 ES ST ANDBY -ON DTV/TV ABC DEF .@/: JKL MNO GHI TUV WXYZ SP ACE CLEAR SETUP DISC MENU RETURN TITLE CHANNEL TIMER REC MODE AUDIO REC RAPID PLA Y CM SKIP PQRS SOURCE 123 456 78 .
98 ES MEMO E7H51UD.indd 98 E7H51UD.indd 98 2007/02/19 18:23:56 2007/02/19 18:23:56.
99 ES MEMO E7H51UD.indd 99 E7H51UD.indd 99 2007/02/19 18:23:56 2007/02/19 18:23:56.
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.
1 Connections Follow to the back side of this sheet. Z C350MS8 DIGITAL VIDEO DISC RECORDER 1) Disconnect the power cord of your TV from the AC outlet. 2) Make the basic connection as illustrated below. 3) Plug in the power cords of the devices to the AC outlet.
3 – 2 Timer Recording 3 – 1 Basic Recording 3 DVD Recording 4 Playback 1VMN23564 / E7H51UD_QG ★★★★★ SP(2Hr) 0:58 CH 12 1 To set one-touch timer recording (OTR).
An important point after buying a device FUNAI ZC350MS8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought FUNAI ZC350MS8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data FUNAI ZC350MS8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, FUNAI ZC350MS8 you will learn all the available features of the product, as well as information on its operation. The information that you get FUNAI ZC350MS8 will certainly help you make a decision on the purchase.
If you already are a holder of FUNAI ZC350MS8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime FUNAI ZC350MS8.
However, one of the most important roles played by the user manual is to help in solving problems with FUNAI ZC350MS8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device FUNAI ZC350MS8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
