Instruction/ maintenance manual of the product CDV210HH8 FUNAI
Go to page of 26
Supplied Accessories AC outlets Plug in 4 5 From TV From DVD/VCR Please refer to “Connections” on page 6. Cable T V signal ANT-OUT ANT-IN RF cable (supplied) (Back of DVD/VCR) (Back of T V ) or An.
– 2 – EN Precautions Precautions This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to po ssible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
EN – 3 – Precautions 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
– 4 – EN Precautions Location and Handling • Do not stand this unit up vertically. Install this unit in a horizontal and stable position. Do not place anything directly on top of this unit.
EN – 5 – Precautions About the Video Cassettes and Discs Playable Discs Unplayable Discs NEVER play back the following discs. Otherwise, malfunction may result! DVD-RAM / DVD-Audio / CD-i / Photo .
– 6 – EN Setup SETUP > AUDIO > DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output. BITSTREAM Connecting to other equipment (an MD deck or DAT deck etc.
EN – 7 – Setup Admiral: AUX Curtis Mathis: LINE1, LINE2, 00, 90, 91, 92, 93 GE: INPUT, TV/VCR, 00, 90, 91, 92, 93 Hitachi: INPUT, AUX JVC: VIDEO, VIDEO1, VIDEO2, VIDEO3 Kenwood: AUX LXI-Series: 00.
– 8 – EN Setup 1 Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6. 2 Select your language when turning this unit on for the first time. Then press [ B ] to go to next step.
EN – 9 – Setup 6: VIDEO IN jack Connect a cable coming from the video out jack of a camcorder, another VCR or an audio-visual source (laser disc player, video disc player, etc.) here. 7: DVD/VCR VIDEO OUT jack Connect the supplied video cable here through the video in jack of a television.
– 10 – EN Setup ST ANDBY -ON DISPLA Y VCR DVD P A USE SLOW VCR/TV SKIP/CH. PLA Y STOP RECORD MENU SETUP TOP MENU MODE ZOOM SUBTITLE T- S E T ANGLE ENTER RETURN SEARCH MODE REPEA T A-B OPEN/CLOSE /EJECT SPEED AUDIO CLEAR/ C.
EN – 11 – VCR Functions 1 Press [SEARCH MODE] once. 2 To select Index Mark 3 4 After searching, it automatically starts playback. 1 Press [SEARCH MODE] twice. 2 Select the desired length of time for fast forwarding or rewinding. 3 4 After searching, it automatically starts playback.
– 12 – EN VCR Functions 1 Press [MENU] , then select “TIMER PROGRAMMING”. 2 Select an empty program number. Then press [ B ] to go to next step. 3 Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”. Then press [ B ] to go to next step. 2 Press [ B ] for “AUTO REPEAT”, “ON” or “OFF”.
EN – 13 – VCR Functions 10 Press [SUBTITLE/T-SET] to set timer standby mode. • TIMER indicator on the front panel lights up. The unit will change to the DVD mode. 6 Select “AM” or “PM”. Then press [ B ] to go to next step. 7 Repeat the procedure in steps 5 and 6 to set the end time.
– 14 – EN VCR Functions Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. DIGITAL AUDIO OUT COAXIAL ANT -OUT ANT -IN AUDI O OUT DVD DVD/VCR VCR .
EN – 15 – DVD Functions ST ANDBY -ON DISPLA Y VCR DVD P A USE SLOW VCR/TV SKIP/CH. PLA Y STOP OPEN/CLOSE /EJECT SPEED AUDIO 123 456 789 0 +10 DVD Functions Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
– 16 – EN DVD Functions 1 1 2 1 Search Functions Using Time Search DV DV D 2 within 5 seconds 03/24 001/002 -- : -- : -- OFF 03/24 001/002 -- : -- : -- OFF PLA Y Press cursor [ B ] to highlight .
EN – 17 – DVD Functions On-Screen Display You can check the information about the current disc by pressing [DISPLAY] on the remote control. DISPLA Y DISPLA Y DISPLA Y DISPLA Y DISPLA Y DISPLA Y DI.
– 18 – EN DVD Functions 2 Select “RANDOM”. Then press [ENTER] . The RANDOM playback will start. 1 at your desired starting point (A) 2 1 Press [MODE] once during stop mode.
EN – 19 – DVD Functions 1 1 1 Special Settings Audio Language DV DV D This unit allows you to select an audio language (if multiple languages are avail- able on disc) during DVD playback. 1 1. ENG Dolb y D 5.1ch 48k/3 Each time you press [AUDIO] or [ s / B ] , the audio language changes as example below.
– 20 – EN DVD Functions 2 Select the desired item. LANGUA GE AUDIO SUBTITLE DISC MENU PLA YER MENU 1 Press [SETUP] . ENTER ENTER ENTER SETUP ENTER ENTER ENTER Hint ∗ 1 • Language options are not available with some discs.
EN – 21 – DVD Functions 3 Select the desired item. DISPLA Y_TV ASPECT TV ASPECT STILL MODE 4:3 LETTER BOX 4:3 P AN & SCAN 16:9 WIDE 3 Select the desired item. AUDIO_DRC DRC DOWN SAMPLING DOLBY DIGIT AL ON OFF Hint STILL MODE: • Select “AUTO” usually.
– 22 – EN DVD Functions Parental Control limits the viewing of discs that exceed your settings. (An incorrect password will not be acceptable.) This feature prevents your children from viewing inappropriate materials. Parental Levels Parental Level allows you to set the rating levels of your DVD discs.
EN – 23 – Information Troubleshooting Guide If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist. • Some functions are not available in specific modes, but this is not a malfunction.
– 24 – EN Information Specifications Video Heads : Four Heads Output signal format : NTSC color Power source : 120 V AC +/- 10%, 60 Hz +/- 0.5% Power consumption : 21 W (standby: 3.8W) Operating temperature : 41°F (5°C) to 104°F (40°C) Dimensions : W : 17 3/16” (435mm) H : 3 3/4” (94mm) D : 9 3/16” (233mm) Weight : Approx 6.
EN – 25 – cut here 1 Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section. 2 Select your language when turning this unit on for the first time. Then press [ B ] to go to next step.
Printed in China E8C1UCD 1VMN23713 ★★★★★ VCR Playback DVD/CD Playback 7 Remote Control 8 Before: Turn on the TV and set it to channel 3. • If channel 3 has been already oc- cupied for broadcasting, see “RF Output Channel” section.
An important point after buying a device FUNAI CDV210HH8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought FUNAI CDV210HH8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data FUNAI CDV210HH8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, FUNAI CDV210HH8 you will learn all the available features of the product, as well as information on its operation. The information that you get FUNAI CDV210HH8 will certainly help you make a decision on the purchase.
If you already are a holder of FUNAI CDV210HH8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime FUNAI CDV210HH8.
However, one of the most important roles played by the user manual is to help in solving problems with FUNAI CDV210HH8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device FUNAI CDV210HH8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
