Instruction/ maintenance manual of the product P-TE1110 Fujitsu
Go to page of 11
Before using the display , read the User’ s manual (1/2) and the User’ s manual (2/2) carefully so that you know how to use the display correctly . Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the safety precautions.
E-2 ACCESSORIES CHECKING ACCESSORIES • Display One remote control T wo AA batteries T wo user’ s manuals One power cable T wo big ferrite cores (E T ype) CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT Carefully check the terminals for position and type before making any connections.
E-3 English PAR T NAMES AND FUNCTIONS Front 1 Power indicator lamp This lamp shows the state of the po wer supply . Lit (red): Power OFF (stand-by) Lit (green): Pow er ON Lit (orange): Power sa ving (DPMS: Power saving function) mode ON Flashing (red or green): Malfunction (Flashes dif ferently depending on the type of malfunction.
E-4 1 OFF/STD-BY switch OFF : The power indicator lamp goes of f, and the power can’t be turned on b y the power b utton. The power is partly supplied. STD-BY :The power indicator lamp lights red, and the po wer can be turned on or off by the po wer button.
E-5 English * T erminal layout may differ and functions may not be av ailable with some models and some device options. 5 External speaker output terminal (EXT SP) Connect this terminal to the optionally av ailable speaker . (When using other speaker than the optional one, use 4–16 Ω speak er.
E-6 Description of Input T erminals PAR T NAMES AND FUNCTIONS (Continued) Pin No. Signal 1 DCD (Data Carrier Detect) 2 RD (Received Data) 3 TD (T ransmit Data) 4 DTR (Data T erminal ready) 5 GND (Ground) 6 DSR (Data Set Ready) 7 R TS (Request T o send) 8 CTS (Clear T o Send) 9 RI (Ring Indication) RS-232C terminal (RS-232C) Pin No.
E-7 English INST ALLA TION T o pre vent the display ’ s internal components from overheating, mak e sure that the display is installed in a well-ventilated location. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this displa y .
E-8 OPTIONS W all-mounting Br ack et 0° to 15° mounting angle P-WB4201 Ceiling unit 0° to 15° mounting angle P-CT4200 Desktop Stand unit P-TT4200 Speaker system P-42SP11 (1 set of 2 speakers) Desk.
E-9 English INST ALLING THE VIDEO BOARD 1. T urn the power supply switch to OFF . 2. Remove the power plug from outlet. 3. Remove the metal fittings on the installation position at the rear of this device (M3 screw x 2). 4. Slide the video board into the installation opening along the left and right guide pins and insert the connectors.
E-10 FACTOR Y SETTINGS This display can store the latest four types of signals for RGB adjustment v alue. The fifth input signal will delete the adjustment v alue of the first input signal.
E-11 English SPECIFICA TION Model P42VCA30W/P42VCA30E HE4VS01W/HE4VS01E Screen size 42" wide screen: 92.0 cm (W) x 51.8 cm (H) (106.0 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) W eight 31 kg / 68 lbs 31.
An important point after buying a device Fujitsu P-TE1110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu P-TE1110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu P-TE1110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu P-TE1110 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu P-TE1110 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu P-TE1110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu P-TE1110.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu P-TE1110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu P-TE1110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
